STIEBEL ELTRON FFB 4 EU Bedienungsanleitung

Funk-Fernbedienungen | Wireless remote controls | Commandes à distance radio |

Radio-Afstandsbedieningen | Radiowe piloty zdalnego sterowania | Rádiové dálkové

ovládání | Diaľkové ovládania

» FFB 4 EU

BEDIENUNG UND INSTALLATION

OPERATION AND INSTALLATION

UTILISATION ET INSTALLATION

BEDIENING EN INSTALLATIE

OBSŁUGA I INSTALACJA

OBSLUHA A INSTALACE

OBSLUHA A INŠTALÁCIA

www.stiebel-eltron.com FFB 4 EU | 13

ENGLISH

CONTENT

OPERATION

1. General information �� 14

1.1 Relevant documents�� 14

2. Safety�� 14

2.1 Intended use�� 14

2.2 General safety instructions �� 14

2.3 Test symbols �� 15

3. Appliance description �� 15

3.1 Operation�� 15

3.2 Dynamic anti-scalding protection �� 16

3.3 Changing the battery�� 17

4. Cleaning, care and maintenance �� 18

5. Troubleshooting �� 18

INSTALLATION

6. Safety�� 19

6.1 General safety instructions �� 19

6.2 Instructions, standards and regulations �� 19

7. Appliance description �� 19

8. Installation�� 19

9. Pairing the wireless remote control �� 19

10. Appliance handover�� 20

11. Speciﬁcation �� 20

GUARANTEE

ENVIRONMENT AND RECYCLING

OPERATION

General information

14 | FFB 4 EU www.stiebel-eltron.com

OPERATION

1. General information

The chapters "Operation" and "Installation" are intended for both

users and qualiﬁed contractors.

Note

Read these instructions carefully before using the appli-

ance and retain them for future reference.

Pass on the instructions to a new user if required.

1.1 Relevant documents

DHEConnect| DHETouch operating and installation

instructions

2. Safety

2.1 Intended use

The wireless remote control is intended for domestic use. It can

be used safely by untrained persons. The appliance can also be

used in non-domestic environments, e.g. in small businesses, as

long as it is used in the same way.

The wireless remote control allows a DHEConnect or DHETouch

instantaneous water heater to be operated remotely.

Any other use beyond that described shall be deemed inappro-

priate. Observation of these instructions and of the instructions

for any accessories used is also part of the correct use of this

appliance.

2.2 General safety instructions

We guarantee trouble-free function and operational reliability only

if original accessories and spare parts intended for the appliance

are used.

!WARNING Injury

The appliance may be used by children over 8years of

age and persons with reduced physical, sensory or men-

tal capabilities or a lack of experience and expertise,

provided that they are supervised or they have been

instructed on how to use the appliance safely and have

understood the potential risks. Children must never play

with the appliance. Children must never clean the ap-

pliance or perform user maintenance unless they are

supervised.

OPERATION

Appliance description

www.stiebel-eltron.com FFB 4 EU | 15

ENGLISH

Note

The wireless remote control is powered by a lithium but-

ton cell.

Remove spent batteries. Leaking batteries cause dam-

age which is excluded from any warranty. Never use re-

chargeable batteries.

2.3 Test symbols

See type plate on the appliance.

3. Appliance description

The wireless remote control allows a DHEConnect or DHETouch

instantaneous water heater to be operated remotely.

The instantaneous water heater can be operated via either the

wireless remote control or the appliance programming unit.

Programming units, mini wireless remote controls and wireless

remote controls can be operated simultaneously.

The wireless remote control can be sited anywhere using a wall

mounting bracket.

3.1 Operation

D0000071074

1 Display

2 Displayed during data transmission

3 Temperature selection 20°C - 60°C in 0.5°C steps, using the

"+" and "-" keys

4 Memory keys "1" and "2"

Shortly after the last setting has been made, the wireless remote

control goes into energy saving mode and the display is switched

off.

If no key is pressed within 5seconds, the wireless remote control

automatically switches back into energy saving mode.

The most recently transmitted temperature is still retained in en-

ergy saving mode.

OPERATION

Appliance description

16 | FFB 4 EU www.stiebel-eltron.com

Function of memory keys "1" and "2"

When either of the memory keys are pressed, the temperature

saved for them is brieﬂy displayed. If no other key is pressed within

the next second, the temperature displayed is directly transmitted.

Function keys "+" and "-"

When the keys "+" or "-" are pressed, the most recently transmitted

temperature is brieﬂy displayed. If no other key is pressed within

the next second, the temperature displayed is directly transmitted.

You can change this temperature in 0.5°C steps by pressing any

other key.

Holding down "+" or "-" changes the temperature display in 0.5°C

steps until the key is released again.

When the key is released, the required temperature is transmitted.

The required temperature is transmitted approx. 0.5seconds after

the last key is pressed. The progress bar on the display indicates

that data is being transmitted.

 To shut down the heating system, set a temperature of 20°C.

Then press "-" again.

Saving temperature to memory keys

 Set the required temperature using the keys on the wireless

remote control.

 Press memory key "1" or "2" for 2seconds. The temperature

display ﬂashes once to conﬁrm. You can set the memory keys

individually for each wireless remote control/ programming

unit.

Note

When activating the anti-scalding protection in the in-

stantaneous water heater, you can only set the DHW tem-

perature to between 20°C and 43°C. Higher temperature

settings are not implemented.

3.2 Dynamic anti-scalding protection

With dynamic anti-scalding protection, once the user selects a

temperature at the appliance programming unit or the wireless

remote control, they then automatically have priority for setting

the maximum temperature. This priority is available for 2min-

utes or until 2minutes after the end of the current draw-off.

After this, the priority is automatically disabled.

Whilst the priority is enabled, the temperature can be reduced

or increased to a maximum of 43°C by other programming

units.

OPERATION

Appliance description

www.stiebel-eltron.com FFB 4 EU | 17

ENGLISH

3.3 Changing the battery

!Material losses

 Remove the old battery.

Any damage caused by a leaking battery is excluded from

the warranty.

D0000071075

1 Battery change symbol

When the battery symbol illuminates, change the battery of the

wireless remote control. The battery may also need changing if

the temperature settings are not received by the device and/or

the range decreases.

 Open the wireless remote control casing by unscrewing the

4screws on the underside of the device.

 Change the battery; for battery type, see chapter "Speciﬁca-

tion/ Data table".

Note

The positive terminal of the battery must point upwards.

 Put the casing back together and re-insert the screws. When

reassembling the casing, do not damage the all-round

gasket.

The saved values for keys "1" and "2" are retained during the

battery change.

Battery disposal

Never dispose of batteries with domestic waste. Spent

batteries may contain noxious substances that can be det-

rimental to the environment and human health. Dispose

of batteries through your dealer or via a central recycling

point for special waste.

OPERATION

Cleaning, care and maintenance

18 | FFB 4 EU www.stiebel-eltron.com

4. Cleaning, care and maintenance

 Never use abrasive or corrosive cleaning agents. A damp

cloth is sufﬁcient for cleaning the appliance.

5. Troubleshooting

Problem Cause Remedy

The required tem-

perature is not being

reached.

Internal anti-scalding

protection is enabled in

the instantaneous water

heater.

Ask a qualified contrac-

tor to deactivate the an-

ti-scalding protection.

"Con" occasionally ap-

pears on the display.

The wireless remote con-

trol is outside its range.

Reduce the distance

between the wireless

remote control and the

appliance. Resend the

temperature request.

"Con" frequently appears

on the display.

The battery is at the end

of its capacity.

Change the battery

(see chapter "Appliance

description/ Battery

change").

If you cannot remedy the fault, notify your qualiﬁed contractor.

To facilitate and speed up your request, provide the number from

the type plate (000000-0000).

The type plate is located at the back of the wireless remote control.

INSTALLATION

Safety

www.stiebel-eltron.com FFB 4 EU | 19

ENGLISH

INSTALLATION

6. Safety

6.1 General safety instructions

We guarantee trouble-free functional and operational reliability

only if original accessories and spare parts intended for the ap-

pliance are used.

6.2 Instructions, standards and regulations

Note

Observe all applicable national and regional regulations

and instructions.

7. Appliance description

Standard delivery

Standard delivery of the wireless remote control includes:

- Battery (inside device)

- Wall mounting bracket with adhesive pad

8. Installation

The wireless remote control with wall mounting bracket is suitable

for installation on even walls (for the range within a building, see

chapter "Speciﬁcation/ Data table"). The wall mounting bracket

can be ﬁxed to smooth walls with the adhesive pad. Alternatively,

it is possible to attach the wall mounting bracket with screws.

9. Pairing the wireless remote control

Pairing

A new wireless remote control is paired as follows:

 Select the following menu items on the programming unit of

the instantaneous water heater: "Settings/ Service/ Wire-

less/ Log on other wireless subscribers". A popup appears

to indicate that the device is ready to be paired; conﬁrm this

with OK.

 Press and hold keys "1" and "2" for 3seconds. Pairing takes

place automatically and is acknowledged when "L" is shown

on the display.

Note

When pairing and forgetting the wireless remote control,

see also the operating instructions for your instantaneous

water heater.

INSTALLATION

Appliance handover

20 | FFB 4 EU www.stiebel-eltron.com

10. Appliance handover

 Explain the functions of the appliance to the user. Show the

user how to operate the appliance.

 Make the user aware of potential dangers, especially the risk

of scalding.

 Hand over these instructions.

11. Speciﬁcation

FFB 4 EU

234478

Application limits

Temperature setting range °C 20-60

Wireless frequency EU MHz 868.3

Frequency band EU MHz 868.000-868.600

Wireless range inside the building approx. m25*

Versions

IP rating IP X7

Battery type CR2032-3V

Electrical data

Electronic standby W<1

Dimensions

Height mm 130

Width mm 63

Depth mm 18.5

Weights

Weight kg 0.12

* The wireless range is dependent on the building character-

istics. Function through a separating ceiling cannot always be

guaranteed.

www.stiebel-eltron.com FFB 4 EU | 21

ENGLISH

GUARANTEE | ENVIRONMENT AND RECYCLING

Guarantee

The guarantee conditions of our German companies do not

apply to appliances acquired outside of Germany. In countries

where our subsidiaries sell our products a guarantee can only

be issued by those subsidiaries. Such guarantee is only grant-

ed if the subsidiary has issued its own terms of guarantee. No

other guarantee will be granted.

We shall not provide any guarantee for appliances acquired in

countries where we have no subsidiary to sell our products.

This will not aect warranties issued by any importers.

Environment and recycling

We would ask you to help protect the environment. After use,

dispose of the various materials in accordance with national

regulations.

GUARANTEE

ENVIRONMENT AND RECYCLING

Andere Handbücher für FFB 4 EU

Inhaltsverzeichnis

Andere STIEBEL ELTRON Fernbedienung Handbücher

STIEBEL ELTRON

STIEBEL ELTRON FFB 4 EU Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FFB W Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FEZ Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FFB1 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FFB 4 EU Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON FB 1 SL Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FFB 1 SL electronic comfort Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FEK 2 Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FFB W Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FB 1 SL Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON IA receiver Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FET Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON FET Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung