StoneAge Saturn Bedienungsanleitung
Stone Age Gamer Saturn MODE mount
install type B.
Remove 5 screws from bottom of Saturn. Remove top of case.
To remove ROM. Disconnect ribbon cables from ROM and screw.
Remove 3 screws from power supply and remove power supply.
Remove screws securing hard metal shielding and controller port ribbon if you
have one. Some Saturns may require removal of power button also.
OR
Carefully remove hard metal shielding from Saturn PC board. Remove controller
and ROM ribbons if needed. Removal of PC board from case will make it easeier to
reinstall later.
Turn hard metal shielding over and remove 4 screws securing the 4 black ROM
mounts. Keep screws.
Install SAG MODE mount using the 4 screwes from the 4 ROM mounts.
Place assembled hard metal shielding on Saturn PC board. If you have a controller
port ribbon now is a good time to install it.
Andere Handbücher für Saturn
1
Andere StoneAge Musikmixer Handbücher
