2 | P a g e
CoolBot Pro Quick Start Set Up Guide Rev 2021 –01A UL ©2021 Store It Cold, LLC
CONNECTING THE COOLBOT PRO TO A WI-FI NETWORK
Skip this entire page if you are using the CoolBot Pro without a Wi-Fi connection - no Jumper connected
CoolBot Pro and CoolBot Jumper Set Up
STEP 1 Unpack the CoolBot Pro in an area with good Wi-Fi reception (outside of your cooler and close to your Router is best). Plug
in the Temperature Sensors and the Heater Cable into the corresponding ports (See diagram on page 4). Don’t connect the
cables to the A/C and don’t plug in the power supply yet.
STEP 2 Connect the CoolBot Jumper to the CoolBot Pro using ONLY the provided silver/grey Data Cable.
STEP 3 Plug in the CoolBot Pro’s Power Supply. You should see codes and flashing mode lights for several seconds. These should
settle down to one flashing Program light, and the code “E0” alternating with the current room temperature.
Wi-Fi Configuration and Web app Set Up
STEP 4 Start the CoolBot Pro App by scanning the QR Code on your smartphone or go to the web page
https://cb.storeitcold.com on a device that has Wi-Fi (PC, tablet, phone, etc.). The CoolBot Pro App
is a web-based app and is not available from any mobile App Store.
STEP 5 On the first screen, fill in your email address, create a password and click the gray button “Create
New Account”. The email address will be used for notifications, as well as to link your CoolBot Pro
data to your account. Continue to follow the prompts and the app will guide you through
configuring the CoolBot Pro to talk to the CoolBot server using your Wi-Fi Network.
STEP 6 When prompted, you will need to change the Wi-Fi settings on your device (PC, tablet, phone, etc.) to connect to the Wi-Fi
network called “CoolBot”. On most smartphones use Settings > Wi-Fi, and on most PCs use the network or Wi-Fi status icon.
STEP 7 After connecting your device (PC, tablet, phone, etc.) to the “CoolBot” network, the next prompt on the app will ask you to
choose from the drop-down menu (or type in) the Wi-Fi network you want the CoolBot Pro to connect to. This is usually the
same network your devices (PC, tablet, phone, etc.) use, but it can be a different network if you prefer. Enter the Wi-Fi
password for the network and press Next. CAUTION - Some devices may change the first letter of your password to a Capital
letter, ensure that your password is correct. CoolBot cannot connect to unsecure Networks (Networks without a password).
STEP 8 Once the CoolBot Pro is connected to the network, you should see no codes flashing on the CoolBot Pro display.
If your device (PC, tablet, phone, etc.) did not automatically switch back to your usual Wi-Fi settings use the method outlined
in Step 6 to switch them back.
STEP 9 Press the “Refresh” button on your browser screen. You should now see temperatures on the app.
Adding the App icon on your home screen
STEP 10 On most devices you can add a link to your home screen for the CoolBot Pro App so you can access it just
like any other app. While in the CoolBot Pro App on your Internet browser do the following:
•In Chrome on Android: Open the menu at the upper right and choose “Add to Home Screen.”
•In Safari on iOS: Tap the Share button at the bottom of the screen and choose “Add to Home Screen.”
•In most desktop browsers, you can drag the icon at the left of the URL bar at the top of the browser and
drop it onto your desktop to create a shortcut.
You may be prompted for your user ID and password the first time you access the App from the icon on the home screen.
STEP 11 You are all set up! Unplug the CoolBot Pro from the power supply and proceed to page 3: “CONNECTING THE COOLBOT
PRO TO A WINDOW AIR CONDITIONER”.
IMPORTANT!
Always disconnect power from the CoolBot Pro before plugging or unplugging the Data Cable.
