Stratasys ProAero Bedienungsanleitung

DOC-01003 Rev. F

ProAero™/ProAero™ UL

Air Extraction System

Installation and User Manual

Page ii

No part of this document may be photocopied, reproduced, or translated into any human or

computer language in any form, nor stored in a database or retrieval system, without prior

permission in writing from Stratasys. This document may be printed for internal use only. All

copies shall contain a full copy of this copyright notice.

Trademark Acknowledgments

Stratasys, Stratasys logo, J3 Series, J5 Series, Origin One, ProAero, are trademarks of

Stratasys Ltd. and/or its subsidiaries or affiliates and may be registered in certain jurisdictions.

All other product names and trademarks are the property of their respective owners.

Confidentiality

This documentation contains Stratasys proprietary information. This information is supplied

solely to assist Stratasys authorized service engineers. No part of this document may be used

for other purposes, and it may not be disclosed to other parties. The specifications on which

this document is based are subject to change without notice.

Liability Statement

Stratasys shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material. Stratasys

makes no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. It is the responsibility

of the system owner/material buyer to determine that Stratasys material is safe, lawful, and

technically suitable for the intended application as well as identify the proper disposal (or

recycling) method consistent with local environmental regulations. Except as provided in

Stratasys' standard conditions of sale, Stratasys shall not be responsible for any loss resulting

from any use of its products described herein.

Disclaimer

Customer acknowledges the contents of this document and that Stratasys parts, materials, and

supplies are subject to its standard terms and conditions, available on

http://www.stratasys.com/legal/terms-and-conditions-of-sale, which are incorporated herein by

reference.

The specifications and/or information on which this document is based are subject to change

without notice.

Technical Service

If problems arise with this system please contact Stratasys Customer Support. Contact

information is available from the Stratasys website at:

http://www.stratasys.com/customer-support/contact-customer-support.

For comments on this guide: [email protected]

Manufactured by:

BOFA International

21-22 Balena Close

Poole, BH177DX, United Kingdom (UK)

Page iii

Contents

Overview........................................................................................................ 1

Safety............................................................................................................. 2

Conventions used in this Guide ............................................................................................ 2

Electrical Safety .................................................................................................................... 2

Fire Safety............................................................................................................................. 3

Dangers to Eyes, Respiration, and Skin................................................................................ 3

Filter Selection ...................................................................................................................... 3

Warning and Information Labels ........................................................................................... 4

Preparation .................................................................................................... 4

Installation...................................................................................................... 6

Connecting to the Power Supply ........................................................................................... 6

Connecting to the J3/J5 Series 3D Printer ............................................................................ 7

Connecting to the Origin One 3D Printer............................................................................... 8

Operation ....................................................................................................... 9

Setting the Desired Airflow .................................................................................................... 9

Maintenance .................................................................................................. 9

Inspecting the System......................................................................................................... 10

Cleaning the System ........................................................................................................... 10

Replacing the Filters ........................................................................................................... 10

Disposing of the Filters........................................................................................................ 13

System Specifications.................................................................................. 13

Dimensions ......................................................................................................................... 14

Filter Information ................................................................................................................. 14

Page 1

Overview

Figure 1: ProAero front

Figure 2: ProAero rear

ProAero in this document refers to both ProAero and ProAero UL.

Cover

Control

panel

Cover

clip

Air

inlet

Control cable

48VDC Max input

Air

outlet

100-240 VAC

Power connector

Power switch

Fuse

compartment

Conventions used in this Guide

Page 2

Safety

Conventions used in this Guide

Below are safety-related symbols used on the extraction system and referred to within this

manual.

Electrical Safety

The air extraction system has been designed to meet the safety requirements of the Essential

Health and Safety Requirements of the Machinery Directive 2006/42/EC.

Disconnect the power from the system before opening the cover.

To reduce the risk of fire, electric shock, or injury:

1. Always disconnect the system from the main power supply before servicing.

2. Use this system only as described in this manual.

3. Connect the system to a properly grounded outlet.

Warning/Danger:

Refers dangerous situations which will result in death or severe injury. Refer to this

guide before proceeding when this symbol is displayed on the system.

Caution:

Refers to a possibly harmful situation. If not avoided, damage could be caused to the

system or its environment. Refer to this guide before proceeding when this symbol is

displayed on the system.

Important:

Refers to tips and other particularly useful information. This does not indicate a

dangerous or harmful situation.

Fire Safety

Page 3

Fire Safety

This system is not designed to be used with processes that include any potential sources of

combustion.

It is the customer's responsibility to verify that any potential sources of combustion are

removed from the process before it reaches the system.

It is important that nozzles or other air extraction/fume capture devices and ductwork are

cleaned regularly to prevent the accumulation of potentially ignitable debris.

Dangers to Eyes, Respiration, and Skin

Dirty filters within the air extraction system contain a mixture of particulates, some of which

may be sub-micron size. Removing and replacing the filter agitates and releases some of these

particulates to the surroundings, enabling them to enter the respiratory system and eyes of the

operator. Additionally, depending on the materials used, the particulate might irritate the skin.

The filter can also cause damage to your feet if dropped.

Filter Selection

The media within the filter in the air extraction system is capable of adsorbing a wide range of

organic compounds. However, it is the responsibility of the user to verify the media and filter

type are suitable for the particular application where the air extraction system is being used.

Caution:

Failure to clean the system and ductwork regularly may result in a fire in the system.

Warning: Hazardous Materials

When replacing filters always wear a mask, safety shoes, goggles, and gloves.

Caution:

This system must not be used with processes that use flammable materials, or with

explosive dusts and gases, without implementation of additional precautions.

Warning and Information Labels

Page 4

Warning and Information Labels

The following labels appear on the air extraction system.

Preparation

Before installation, check the extraction system for damage. All packaging must be removed

before the system is connected to the power supply.

1. Move the system near the installation location and remove the outer packaging.

Labels Meaning Location

Goggles, gloves, and masks must be

worn when handling used filters. Front of system.

Do not cover any vents or holes

adjacent to the label. Bottom panel.

Electrical hazard. Removal of panels

with this label exposes electrical

components.

Bottom panel.

Warning. Turn the power to the system

off before opening the panel with this

label.

Near the cover

release clips.

If the system is used in a manner that is not specified by the manufacturer, the system

warranty is void.

Important:

Read all instructions in this manual before using this system.

• Intended use: This device is intended for indoor use only, to extract and filter

fume from a variety of 3D printers.

• Install this system in a well-ventilated area.

• If you intend to vent the air from the system directly into the room, place the

system at least 50 cm (19.5 in.) from another object on the side of the air outlet

to ensure adequate airflow.

Warning and Information Labels

Page 5

2. Configure the air outlet as needed, from the side (as shown in Figure 2 (page 1)) or from

the bottom.

3. Verify that the filter is positioned correctly before replacing the cover and securing the clips.

Figure 3: Securing the cover

The air outlet can be configured to suit the user’s needs. The rear outlet can be

covered using the plate screwed to the underside of the extraction system. The air

then exits through the opening under the system.

When the rear outlet is in use, cover the opening under the system with the plate.

Caution:

Do not cover the exhaust outlets, as this restricts the airflow and causes overheating.

Cover

Pre-filter

pad

Combined

filter

Connecting to the Power Supply

Page 6

Installation

Connecting to the Power Supply

Follow the specifications listed in “System Specifications” (page 13) when selecting the power

supply outlet for the extraction system, and verify the power supply is suitable before

connecting the system.

The air extraction system features a fused IEC inlet for the power cable, as well as a main

power switch.

The power outlet at the site should be located near the system. The power cable should be

routed so as not to create a trip hazard.

Connect the power cable to the system. Only connect the cable to the power outlet after

finishing the installation process.

Warning: Electric Shock Hazard

The extraction system must be connected to a properly grounded outlet.

Important:

Check the integrity of the electrical power cable. If the power cable is damaged, do not

connect the extraction system to the main power supply with that power cable. The

power cable should only be replaced by a Stratasys engineer, as an electrical safety

test might be required after replacement.

Connecting to the J3/J5 Series 3D Printer

Page 7

Connecting to the J3/J5 Series 3D Printer

1. Connect the control cable from the extraction system (shown in Figure 2 (page 1)) to the

AUX 24V connector in the connection panel on the back of the J3/J5.

Figure 4: J3/J5 exhaust vent and power connection panel

2. Connect the exhaust duct to the adapter on the printer and secure the duct to the adapter.

3. Connect and secure the other end of the exhaust duct to the ProAero.

The vent out of the printing area should be as close as possible to the printing

area without interfering with the 3D printing process, to ensure effective fume

extraction.

Exhaust duct

adapter

Control cable

connector

Andere Handbücher für ProAero

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stratasys Schrubber Handbücher

Stratasys

Stratasys ProAero+ Bedienungsanleitung

Beliebte Schrubber Handbücher anderer Marken

Olympus

Olympus M200H Bedienungsanleitung

Clarke

Clarke BEXT 100H Installations- und Betriebsanleitung

JOHNY VAC

JOHNY VAC JVC70BCT Bedienungsanleitung

RCm

RCm Elan Series Handbuch

Kärcher

Kärcher B 120 W Bedienungsanleitung

Truvox

Truvox Orbis MotorScrubber 20 Bedienungsanleitung

Numatic

Numatic TTB 4045/100 Bedienungsanleitung

U.S. Products

U.S. Products PEX 500-C-TICK Betriebsanleitung

Mclennan

Mclennan C510 Bedienungsanleitung

Tennant

Tennant T20 LPG Bedienungsanleitung

Columbus

Columbus ARA 66 BM 100 Bedienungsanleitung

Numatic

Numatic TTV 678G / 300T Bedienungsanleitung

American-Lincoln

American-Lincoln 505-945 Bedienungsanleitung

FIORENTINI

FIORENTINI ET 65-75 Bedienungsanleitung

Floorpul

Floorpul ruby 48 blt Benutzerhandbuch

Onyx

Onyx RX-34 Bedienungsanleitung

Dustbane

Dustbane Hurricane 400 Bedienungsanleitung

Sana

Sana EUJ-702 Bedienungsanleitung