Product Characteristics:
The Oxford dryer is fitted with a fully automatic infrared sensor ensuring a hygienic
no-touch hand drying experience. The Oxford dryer will start when it senses your
hands underneath and will stop when you take your hands away.
Please install the Oxford dryer with the fixings provided once you have taken off
the cover. Also please disconnect the plug before installing.
The Oxford dryer is suitable for high traffic washroom environments such as
hotels, offices, schools, leisure centres, restaurants and bars.
Do not install the Oxford dryer in wet areas or areas with heavy surface water
vapour to avoid an electric shock.
You must be a qualified electrician to install the Oxford dryer.
You must disconnect the power before installing.
It is advised to install a fused spur with the Oxford dryer.
Do not disconnect, repair or make any alterations of the Oxford dryer without
authorisation otherwise there is a risk of electric shock, fire and other hazards.
The Oxford dryer is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the dryer by a person responsible for their safety.
Please ensure that there are no obstructions to the air outlet within 400 mm.
Do not install the Oxford dryer above stainless steel or artificial marble or
similar surfaces with a shiny surface otherwise it may be prone to malfunction.
The Oxford dryer should be firmly fixed to a smooth wall to avoid injuries or
product damage.
Do not install the Oxford dryer in places with corrosive or flammable gases or
objects as it may cause fire or malfunction to the product.
Do not install the Oxford dryer in areas with heavy dust in the air or in very high
temperatures as it may cause product damage.
Note Prior to Installation:
Attention:
1
