Streamax AD Plus Bedienungsanleitung

AD Plus

Installation Guide

www.streamax.com

Page 2of 52

Type of document

General

Product planning document

Internal use only

Version

52 pages in total

V1.6

Revision History

Date

Revision

Modification Description

Author

April 16, 2021

V 1.0

First draft of AD Plus solution

May 10, 2021

V 1.1

Modification of format and content

June 17,2021

V 1.2

Modification of the device image

September 23, 2021

V1.3

Supplementary precautions for

inertial navigation installation

Supplementary precautions for the

installation of glass-mounted and

countertop-mounted CA29M

October 27, 2021

V1.4

Modification of ADAS calibration

and DMS installation precautions

December 24, 2021

V1.5

Added BSD calibration

April 1, 2022

V1.6

Modification of ADAS/DSC/DMS

calibration

Zhouhao/Wangxiaoyong

www.streamax.com

Page 3of 52

Table of Contents

Foreword........................................................................................................................................................5

Important Instructions .................................................................................................................................5

1. System Overview..................................................................................................................................7

1.1 Product Overview..............................................................................................................................7

1.2 Schematic Diagram of System Connection-Power Supply through OBD.........................................7

1.3 Schematic Diagram of System Connection-Power Supply through Discrete Wire...........................7

2. Preparation for Installation.................................................................................................................8

2.1 Technical Requirements for Installation............................................................................................8

2.2 Understanding of Installation Environment.......................................................................................8

2.3 Confirmation of Vehicle Conditions and Vehicle-related Electrical Information.............................8

2.4 Power Supply Connection of Vehicle................................................................................................8

2.5 Connection of Necessary Signal Cables............................................................................................9

3. Preparation of List of Installation Materials and Tools...................................................................9

3.1 Inspection as per Packing List...........................................................................................................9

3.2 Preparation of Installation Tools .....................................................................................................10

3.3 Preparation of SIM Card and Micro SD Memory Card...................................................................12

4. Installation of AD Plus.......................................................................................................................12

4.1 Installation of SIM Card and Memory Card....................................................................................12

4.2 Selection of DVR Installation Area.................................................................................................13

4.3 Installation of DVR Bracket............................................................................................................14

4.4 Installation of DVR .........................................................................................................................16

4.5 Adjustment and Fixation of DVR....................................................................................................17

4.6 Power Supply Connection, Connection of Signal Cables and Wiring.............................................18

4.6.1 Power Supply Connection ......................................................................................................18

4.6.3 Wiring.....................................................................................................................................22

5. Calibration of AD Plus.......................................................................................................................23

5.1 ADAS Calibration ...........................................................................................................................23

5.1.1 Connection with APP..............................................................................................................23

5.1.2 Installation Parameters Measurement of the ADAS Camera Lens ........................................24

5.1.3 Calibration of ADAS Camera Lens........................................................................................25

5.2 DSC Calibration ..............................................................................................................................29

5.2.1 Left and Right Rudder Setting ................................................................................................29

5.2.2 Cab Camera Angle Adjustment ..............................................................................................30

5.3 BSD Installation and Calibration......................................................Error! Bookmark not defined.

5.3.1 Top-view Installation and Calibration ......................................Error! Bookmark not defined.

5.3.2 Side-mounted Calibration..........................................................Error! Bookmark not defined.

5.3.3 Blind Spot in Front of the Vehicle .............................................Error! Bookmark not defined.

6. Installation and Calibration of Optional Components...................................................................31

6.1 DMS Camera...................................................................................................................................31

www.streamax.com

Page 4of 52

6.1.1 Requirements for Installation Position...................................................................................32

6.1.2 Requirements for Installation Angle.......................................................................................33

6.1.3 Requirements for Installation Details.....................................................................................34

6.1.4 Installation Steps....................................................................................................................34

6.1.5 Calibration Requirements.......................................................................................................39

6.2 BSD Installation and Calibration.....................................................................................................42

6.2.1 Top View Camera Installation and Calibration.....................................................................42

6.2.2 Calibration for lateral side installation..................................................................................46

6.2.3 Calibration of Blind Spot in Front Top View .........................................................................50

6.2.4 Principle of Actual Vehicle Routing.......................................................................................51

7. Acceptance and Cleaning...................................................................................................................51

7.1 Cleaning...........................................................................................................................................51

7.2 Installation Acceptance....................................................................................................................52

www.streamax.com

Page 5of 52

Foreword

This AD Plus Installation Guide is hereby prepared to better guide engineering personnel to

install AD Plus and its accessories properly and quickly, and to improve installation

efficiency.

This document mainly includes the following parts: foreword, system overview, preparation

for installation, introduction to installation, and acceptance and cleaning.

This document is applicable to installation engineering personnel.

Streamax Technology Co., Ltd. has the right of final interpretation for this document, and

reserves the right to make corrections to this document or to make changes to the information

and description herein. No prior notice will be given if there is any change.

Important Instructions

1. Before installation, please park the vehicle on the horizontal ground and shut down the

engine (do not park the vehicle on a ramp or an inclined road).

2. Please read the section of packing list carefully and check carefully at the time of

unpacking.

3. Please read the section of tool list carefully and provide installation tools before product

installation.

4. Before installation, please observe the vehicle environment and follow the principles

below:

a. The installation position and wiring of the product shall neither affect the driver's

view nor affect the adjustment of the rearview mirror and sun visor;

b. The camera lens for monitoring the road condition ahead of the vehicle must be

within the working range of the windshield wiper;

c. The installation position of the camera for monitoring the driver in the vehicle shall

comply with local regulations;

d. The installation position shall be convenient for the replacement and maintenance of

Micro SD card and SIM card.

5. The appropriate installation position shall be selected according to the vehicle

environment, and this document is for reference only.

6. The appropriate power supply connection method shall be selected according to the

vehicle environment. If discrete wire connectors are adopted, connection to the

power supply and all signal cables of vehicle is required, and shall be carried out by

specialized personnel, as it may be dangerous for non-specialized personnel to

operate the power system of the vehicle without authorization. This document is for

reference only.

7. In case of any problem in the installation for special vehicles, please contact the product

supplier in time for support.

8. Veyes App is required to debug and configure AD Plus during installation.

9. Please scan the QR code below, or search and download the Veyes APP in the App Store.

After the download is completed, connect the APP to AD Plus for related operations

according to the prompt on the interface of the APP.

www.streamax.com

Page 6of 52

IOS (Apple Store)

Foreign Android (Google Store)

www.streamax.com

Page 7of 52

1. System Overview

1.1 Product Overview

AD Plus is a dual-camera integrated intelligent Digital Video Recorder (DVR)

designed for driving monitoring and safety risk control, with advantages of simple

installation, comprehensive functions and low price.

The deep learning technology is adopted for the intelligent algorithm of AD Plus.

AD Plus has the features of advanced driver-assistance system (ADAS) and

intelligent cockpit, and can effectively identify the hazards such as front collision,

close car-following and lane departure, as well as intelligently identify unsafe

driving behaviors of driver such as use of mobile phone and seat belt unfastened

during driving. With DMS camera or BSD camera, the product can further

implement the function of driver status monitoring or blind spot pedestrian

detection. With intelligent auxiliary functions, the product can identify potential

risks in real time and remind drivers to avoid them in time in case of any driving

safety risks, thus effectively reducing accident risks.

The product is suitable for most weather conditions such as day and night, rain and

snow, and can be installed on buses, taxis, ordinary passenger cars, passenger

vehicles, freight vehicles, dangerous goods transport vehicles, school buses, muck

trucks, sanitation vehicles and other vehicles.

1.2 Schematic Diagram of System Connection-Power Supply through

OBD

1.3 Schematic Diagram of System Connection-Power Supply through

Discrete Wire

www.streamax.com

Page 8of 52

2. Preparation for Installation

2.1 Technical Requirements for Installation

Relevant personnel shall be familiar with the functions, applications and the overall

composition principle of the product.

Relevant personnel shall understand the electrical circuits and structure of motor

vehicles, and common installation methods of in-vehicle equipment.

2.2 Understanding of Installation Environment

Before equipment installation, relevant personnel shall have a clear understanding

of the vehicle model concerned, the installation positions of the main unit and

auxiliary cameras of the DVR, the type and length of cables required for each

vehicle model, and the list of common auxiliary materials, so as to ensure successful

completion of equipment installation and commissioning.

2.3 Confirmation of Vehicle Conditions and Vehicle-related Electrical

Information

Confirmation of vehicle information is the basic precondition of successful

installation and also the guarantee of division of responsibilities to avoid any

damage to the vehicle. For each component, proceeding to next step is only allowed

after clear confirmation, and each operation shall be confirmed by the person in

charge of the vehicle and the installation personnel.

(1) Check the appearance and interior trims of the vehicle for any damage.

(2) Check whether the vehicle can ignite normally.

(3) Check whether the vehicle power supply system is in good condition.

*Note: Confirmation of the above information is crucial. Installation can only be

carried out after the above information is considered normal through confirmation.

2.4 Power Supply Connection of Vehicle

AD Plus has two power supply connection modes:

1. Quick plug-in type power supply connection through OBD interface: This

mode is suitable for quick installation by users themselves. For details of this

power supply mode, please refer to the accompanying AD Plus Product

Manual in the AD Plus packing box. It will not be detailed here.

2. Power supply connection through discrete wire: This mode requires operation

by specialized installation personnel. The following mainly describes the mode

www.streamax.com

Page 9of 52

of connection to the vehicle power supply according to the power cable

requirements of the product.

(1) Required tool: multimeter.

(2) Selection of power supply connection position

When the vehicle is shut down, use a test pencil to detect whether the circuit is live.

If it is live, it is judged as a constant power supply, and then measure the voltage.

When the vehicle is shut down and is in ACC position or ignition state, use a test

pencil to detect whether the circuit is live. If it is electrically neutral in shutdown

state, and is live in ACC position or ignition state, it is judged as an ACC power

cable, and then measure the voltage.

(3) Voltage measurement of power supply connection

Constant power supply: When the vehicle is shut down, use a multimeter to

measure whether the voltage of the constant power supply cable is about 24V. If the

voltage of multiple cables is about 24V in shutdown state, select the cable with

higher current as the constant power supply connection cable.

ACC:When the vehicle is in ACC position or ignition state, use a multimeter to

measure whether the voltage is about 24V. If the voltage is 0 in shutdown state and

about 24V in ACC position or ignition state, select the cable as the ACC power

supply connection cable.

*Note: During power supply connection, first conduct measurement at the positive

and negative terminals of the power supply with a multimeter, to avoid wrong

connection.

2.5 Connection of Necessary Signal Cables

Where required, the following signal cables must also be connected to enable the

intelligent assisted driving functions of AD Plus:

(1) Vehicle speed pulse cable or CAN data cable - to obtain accurate vehicle speed

data;

(2) Left and right steering signal cables - to obtain left and right steering

information of vehicle;

(3) Brake signal cable - to obtain vehicle braking information.

Please consult the maintenance engineer of the vehicle discipline for specific

position of vehicle speed pulse cable/CAN data cable. Generally, the left and right

steering signal cables and the brake signal cable are arranged on the fuse board

below the steering wheel or below the front passenger dashboard, and measurement

for these cables can be conducted using a multimeter.

*Note: If the measured signal is a pulse signal, the source of left steering/right

steering/brake signal shall be set as pulse on the setting interface of the main unit; if

the measured signal is a continuous high or low level signal, the source of left

steering/right steering/brake signal shall be set as level on the setting interface of the

main unit.

3. Preparation of List of Installation Materials and Tools

3.1 Inspection as per Packing List

After unpacking the product, please confirm whether the DVR is intact and whether

the accessories are complete.

www.streamax.com

Page 10 of 52

3.2 Preparation of Installation Tools

Before installation, the following installation accessories and tools shall be made

available.

List of Installation Tools and Accessories

S/N

Picture

Name of Tool

Purpose

Qty.

Torsion drill

Tighten screws

1 pcs

Common

screwdriver socket

Tighten screws; optional

1 pcs

Crow plate

Pry up the vehicle panel

1 pcs

Ties

Bundle cables

Several

Dry cleaning cloth

Clean the countertop

1 pcs

Inhaltsverzeichnis

Andere Streamax Dashcam Handbücher

Streamax

Streamax C6D Bedienungsanleitung

Streamax

Streamax X5-8CH MDVR GUI Bedienungsanleitung

Streamax

Streamax AD Plus2.0 Bedienungsanleitung

Streamax

Streamax M1-H0401 Bedienungsanleitung

Beliebte Dashcam Handbücher anderer Marken

Cansonic

Cansonic UltraDuo Z2 Bedienungsanleitung

Gazer

Gazer F720 Bedienungsanleitung

HP f500g Bedienungsanleitung

Xblitz

Xblitz TANGO 4K Bedienungsanleitung

Rexing

Rexing M1 Bedienungsanleitung

Maka Technologies

Maka Technologies Marbella MXPro Bedienungsanleitung

NESA

NESA NRC-80DLM Montage- und Bedienungsanleitung

Kaiser Baas

Kaiser Baas R20 Bedienungsanleitung

Boyo

Boyo VTM43TC Bedienungsanleitung

Minolta

Minolta MNCD37 Bedienungsanleitung

Thinkware

Thinkware FA10 Bedienungsanleitung

Momento

Momento MD-5200 Bedienungsanleitung

BlackVue

BlackVue DR590X-1CH Bedienungsanleitung

HP F300 Bedienungsanleitung

CammSys

CammSys BlackSys BH-300 Bedienungsanleitung

Snooper

Snooper DVR-2HD Bedienungsanleitung

Lukas

Lukas Q900 Bedienungsanleitung

RVS

RVS 450C Bedienungsanleitung