• When the Air Compressor reaches the desired pressure the unit
will automatically cut-off, turn “OFF” the power with the “ON/OFF” switch (2). Un-Clip the connector
(if you want a completely accurate pressure reading, use a tyre pressure gauge) when the inflation is
complete unplug the compressor from the 12V power socket.
Other useful information
Store in a cool dry place with the air hose & power lead coilded and replaced in their compartments..
Car tyres should normally be inflated to pressures ranging from 1.65 bar (24 psi) to 2.2 bar (32 psi). Tyres
for large vehicles might need a pressure up to 2.75 bar (40 psi). Tyres are generally marked with their
maximum pressure in psi or bar on the tyre.
To Inflate Bicycle Tyres
• The bicycle adapter should be used for inflating bicycle tyres, follow the instructions overleaf.
Inflating Other Items e.g. inflatable toys, etc.
• Choose a suitable adapter nozzle or pump needle and insert it into the valve of the object which you
want to inflate.
• Insert the 12V plug into your 12V power socket to start the pump.
• Unplug the 12V power plug when the desired pressure has been reached.
NOTE! Toys and air mattresses can burst if you over-inflate them! Never pump to a higher pressure than
the one which is recommended.
4. Disposal - Follow local guidance when disposing of this product. If you are unsure how to proceed,
contact your local authority.
5. Specifications
Power supply - DC 12V, (centre positive)
Current draw - Approx 10Amp @ 6Bar
Max pressure - 6.9Bar (100 psi)
Length of 12V lead - 280 cm
Air hose length - 60cm
Free alr delivery - 30 L/min
CAUTION:
1. Do not inflate items beyond their needs. To avoid over-inflation carefully follow instructions on articles
to be inflated. Do not exceed recommended pressures.
2. Bicycle tyres and other small articles will inflate relatively quickly.
3. Recreational items such as beach toys and air mattresses require low pressure. Inflate until firm.
INSTRUCTIONS IF COMPRESSOR FAILS TO START
Note: If the 12V power socket doesn’t work from its socket, your compressor won’t work from it either. If
your compressor does not start, check the following.
1. Foreign matter may become lodged in 12V power socket. Carefully remove any obstruction using a
suitable tool. Insert plug once more and turn several times to make good contact.
2. 12V power socket fuse may be worn or weak. If so, replace with a new 15Amp fuse.
3. Some 12V power sockets have a circuit breaker located directly behind 12V power sockets. It may
have blown and should be replaced.
Streetwize: Ashburton Road West, Trafford Park, Manchester, M17 1RY
T: +44 (0)161 447 8597
T: +44 (0)161 447 8580
Visit our website: www.streetwizeaccessories.com
Follow us on social media
We have over 1000 car and leisure products in our range
“Streetwize”
Visit our website: www.streetwizeaccessories.com
Follow us on social media
We have over 1000 car and leisure products in our range
“Streetwize”
EU Registered address: The Ace Supply Co (Europe) Ltd, 25 Herbert Place, Dublin 2, D02 A098 ROI.
