Studer Xcom-GSM Bedienungsanleitung

Studer Innotec SA 2013 V1.0.5

51X

Xcom-GSM / Xcom-LAN

Remote communication sets

for Xtender and VarioTrack systems

User Manual

Studer Innotec SA

Xcom-GSM/Xcom-LAN

2 V1.0.5 User manual

Studer Innotec SA

Xcom-GSM/Xcom-LAN

User Manual V1.0.5 3

CONTENTS

1INTRODUCTION......................................................................................................................................5

1.1 Remote communication set for Xtender and VarioTrack systems.............................................5

1.2 Conventions.......................................................................................................................................... 5

1.3 Warranty and liability..........................................................................................................................5

1.3.1 Warranty and liability...................................................................................................................... 5

1.3.2 Exclusion of warranty......................................................................................................................6

1.3.3 Exclusion of liability..........................................................................................................................6

1.3.4 Compatibility....................................................................................................................................6

1.4 Safety precautions...............................................................................................................................6

1.4.1 Generalities.......................................................................................................................................6

1.4.2 Warnings............................................................................................................................................6

2MOUNTING AND INSTALLATION...........................................................................................................7

2.1 Installation of the Xcom 232i..............................................................................................................7

3WIRING ...................................................................................................................................................7

3.1 Xcom-GSM set...................................................................................................................................... 7

3.1.1 Contents of the remote communication set Xcom-GSM.......................................................8

3.1.2 Mounting place...............................................................................................................................8

3.1.3 Installing the SIM card .................................................................................................................... 8

3.1.4 Connecting the GSM modem......................................................................................................8

3.2 Xcom-LAN set .......................................................................................................................................9

3.2.1 Contents of the remote communication set Xcom-LAN ........................................................9

3.2.2 Mounting place...............................................................................................................................9

3.2.3 Connecting the Ethernet gateway.............................................................................................9

4CONFIGURING THE XCOM-232I.........................................................................................................10

4.1 Download the software....................................................................................................................10

4.2 Insert the SD card...............................................................................................................................10

4.3 Select the SD card drive...................................................................................................................10

4.4 Set the parameters............................................................................................................................11

4.4.1 For Xcom-LAN ................................................................................................................................11

4.4.2 For Xcom-GSM...............................................................................................................................11

4.5 Generate the configuration file......................................................................................................12

4.6 Remove the SD card.........................................................................................................................13

4.7 Setup the parameters in the Xcom-232i........................................................................................13

4.8 Creation of your account................................................................................................................14

4.9 Registration of installation ................................................................................................................15

4.10 Installation completed......................................................................................................................16

5XCOM PORTAL.....................................................................................................................................16

5.1 Home Page.........................................................................................................................................16

5.2 Facility Page........................................................................................................................................16

5.2.1 Installation.......................................................................................................................................16

5.2.2 Remote Control.............................................................................................................................16

5.2.3 Sharing.............................................................................................................................................16

5.2.4 Messages ........................................................................................................................................16

5.2.5 Notifications....................................................................................................................................16

6NOTES ...................................................................................................................................................17

Studer Innotec SA

Xcom-GSM/Xcom-LAN

4 V1.0.5 User manual

Studer Innotec SA

Xcom-GSM/Xcom-LAN

User Manual V1.0.5 5

1INTRODUCTION

1.1 REMOTE COMMUNICATION SET FOR XTENDER AND VARIOTRACK SYSTEMS

The remote communication sets Xcom-LAN or Xcom-GSM allow you to view, configure

and control Xtender and VarioTrack systems from anywhere in the world. With a simple

Internet access on a Smartphone, a tablet or a notebook, your installation is accessible

through a virtual remote control on Studer’s dedicated web portal. This virtual remote

control’s interface is designed to resemble the standard remote control RCC-02/-03 and

offers the same functionality as if on-site. By keeping the same interface as the RCC-02/03,

managing the system is easy and familiar.

All information and warning messages are listed on the server and can be used as a

trigger to send messages by E-mail or SMS. Access to the web portal can easily be given

to a third part if assistance is needed to analyse or configure a system.

Two solutions are provided to access the virtual remote control:

Xcom-LAN, for systems connected to a wired Local Area Network giving access to the

internet WEB

Xcom-GSM, for systems with no available LAN but access to the GSM network, either by

GPRS (worldwide) or by 3G (WCDMA).

The present manual is valid for both the Xcom-LAN and Xcom-GSM remote

communication sets. Before installation of the communication system, carefully read this

user manual and proceed thereafter with the installation and configuration as explained

in the following chapters.

For further information on the different devices of these sets, please refer to the respective

user manuals.

1.2 CONVENTIONS

This symbol is used to indicate the presence of a dangerous voltage that is

sufficient to constitute a risk of electric shock.

This symbol is used to indicate a risk of material damage and/or the cancellation

of the guarantee.

This symbol is used to indicate a procedure or function that is important for a safe

and correct use of the equipment

. Failure to respect these instructions may lead

to the cancellation of the guarantee or to a non-compliant installation.

1.3 WARRANTY AND LIABILITY

1.3.1 Warranty and liability

During production and assembly, each Xcom-232i undergoes several controls and tests

which strictly comply with established procedures. Each Xcom-232i is given a serial

number allowing a perfect follow-up of the controls, in conformity with the specific data of

every device. For this reason, it is very important to never remove the descriptive sticker

bearing the serial number. The production, assembling and tests of each Xcom-232i are

entirely carried out in our factory in Sion (CH). The warranty for this product depends on

the strict application of the instructions in this manual.

Studer Innotec SA

Xcom-GSM/Xcom-LAN

6 V1.0.5 User manual

1.3.2 Exclusion of warranty

No warranty claims will be accepted for damages caused by handling, operation or

actions that are not described in this manual. Damages arisen from the following events

are excluded from the warranty:

•Overvoltage on the device.

•Liquid in the device or oxidation due to condensation.

•Damage resulting from a fall or a mechanical shock.

•Modifications carried out without the explicit authorization of Studer Innotec SA.

•Nuts or screws partially or insufficiently tightened during installation or maintenance.

•Damage due to atmospheric overvoltage (lightning).

•Damage due to inappropriate transport or packaging.

•Disappearance of original identification marks.

1.3.3 Exclusion of liability

Installation, commissioning, use and maintenance of this device cannot be supervised by

Studer Innotec SA. For this reason, we do not accept any liability for damage, costs or

losses resulting from an installation that does not comply with the instructions, by a faulty

operation or by inadequate maintenance. The use of this device is under the responsibility

of the end-user. This device is neither designed nor guaranteed for the supply of life

support applications or any other critical application with potential risks for human beings

or for the environment. We shall assume no liability for patent infringement or other third

party rights involved in the use of this device.

1.3.4 Compatibility

Studer Innotec SA guarantees the compatibility of the software updates with the

hardware for one year, starting from the date of purchase. The updates are no longer

guaranteed beyond this date and a hardware upgrade may be required. Please contact

your reseller for any additional information on compatibility.

1.4 SAFETY PRECAUTIONS

1.4.1 Generalities

Do read carefully all safety instructions before proceeding to the installation and

commissioning of the device. Not respecting these instructions might constitute a lethal

physical danger but can also damage the functionalities of the device. Therefore do keep

this manual close to the device.

Do, for any installation, follow strictly the local and national norms and regulations in force.

1.4.2 Warnings

•The installation and commissioning of the communication sets must be entrusted to

skilled and qualified personnel perfectly aware of the safety precautions and local rules

in force.

•All components connected to this device must be conforming to the laws and

regulations in force. The persons without a written authorization from Studer Innotec SA

are forbidden to do any change, modification or repair whatsoever. Regarding

authorized modifications and replacements, only genuine components shall be used.

•This device is meant for indoor use only and must under no circumstances stand in the

rain, the snow or any other humid or dusty environment.

•In case of use in motor vehicles this device must also be protected against vibrations by

absorbing components.

Studer Innotec SA

Xcom-GSM/Xcom-LAN

User Manual V1.0.5 7

2MOUNTING AND INSTALLATION

Both the Xcom-GSM and the Xcom-LAN are powered through the Studer proprietary bus.

The distance between the Xcom-232i and the device supplying it (Xtender or VarioTrack)

should not exceed 10m in order to avoid excessive voltage drop in the wire which could

affect the functionality.

2.1 INSTALLATION OF THE XCOM 232I

Follow the Xcom-232i instruction manual.

When the Xcom-232i has been installed correctly according to the procedures mentioned

in its manual, the remaining installation procedure depends on the chosen remote

communication set.

3WIRING

3.1 XCOM-GSM SET

In order to install the Xcom-GSM set, there need to be sufficient GSM network coverage

on the site of the Xtender or VarioTrack system. The network also has to conform to one of

the following standards: GSM / GPRS / EDGE / UMTS / HSDPA on these frequencies 850 /

900/ 1800 / 1900 / 2100 MHz.

The GSM modem “E-lins M400” supplied by Studer Innotec requires the installation of a SIM

card (not provided) that allows data transfer from a local service provider. Please refer to

the chap. 3.1.3 when installing the SIM card.

The volume of data transferring via the communication system to Studer’s server will

depend on its utilisation (frequency and duration of use) but it will necessitate at least 2MB

data per month. When the remote communication is in use, the volume of data

transferred is approximately 30kB per minute. When the data logger function is activated,

the additional volume of daily data may represent up to 1MB per day, depending on the

number of devices present on the Studer communication bus.

If a Xcom-232i is connected to another compatible device (Xtender, VarioTrack,

BSP, RCC) with the same communication bus, it is highly recommended to make

a software update in order to guarantee all functionalities of the system.

Configuration of the Xcom-232i will be carried out after the installation of the

selected gateway (GSM or LAN) in accordance with chapter 4.

The system will not function properly with any other modems than the ones stated

above, even if they are correctly connected to the Xcom-232i.

Studer Innotec SA

Xcom-GSM/Xcom-LAN

8 V1.0.5 User manual

3.1.1 Contents of the remote communication set Xcom-GSM

The remote communication set Xcom-GSM is delivered with the material listed below:

•1 Xcom-232i

•2m communication cable

•1 MicroSD with adaptor

•1 M400 cellular modem

•1 external antenna

•0.25m serial cable

•0.5m power supply cable RJ45-Jack

•1 Xcom-232i user manual

•1 M400 series cellular modem datasheet

•1 Xcom-GSM/Xcom-LAN user manual

3.1.2 Mounting place

The GSM modem should be mounted close to the Xcom-232i, maximum 20cm apart, and

fixed with two separate sliding pins into the rail of the GSM enclosure.

3.1.3 Installing the SIM card

Eject the small drawer close to the antenna connector by pushing the yellow button next

to it, place the SIM card in the slot and reinsert the drawer.

3.1.4 Connecting the GSM modem

1) Connect the antenna to the modem

2) Connect the serial cable between the modem and the Xcom-232i

3) Connect the power cable between the modem and the Xcom-232i

4) Connect the Studer communication cable between the Xcom-232i and the

installation

The termination switch next to the 2 RJ 45 connectors on the Xcom-232i

must be

set in position T.

Studer Innotec SA

Xcom-GSM/Xcom-LAN

User Manual V1.0.5 9

3.2 XCOM-LAN SET

3.2.1 Contents of the remote communication set Xcom-LAN

The remote communication set Xcom-LAN is delivered with the material listed below.

•1 Xcom-232i

•2m communication cable

•1 MicroSD with adaptor

•1 NPort 5110A Ethernet gateway

•3m Ethernet cable

•0.25m serial cable

•0.5m power supply cable RJ45-Jack

•1 NPort 5110A series quick installation guide

•1 Xcom-GSM/Xcom-LAN user manual

3.2.2 Mounting place

The Ethernet gateway should be mounted on a smooth surface using the mounting holes

as shown in the "NPort 5110A series quick installation guide".

3.2.3 Connecting the Ethernet gateway

1) Connect the Ethernet cable between the Ethernet gateway and the router

2) Connect the serial cable between the Ethernet gateway and the Xcom-232i

3) Connect the power cable between the Ethernet gateway and the Xcom-232i

4) Connect the Studer communication cable between the Xcom-232i and the

Xtender or VarioTrack installation

The termination switch next to the 2 RJ 45 connectors on the Xcom-

232i must be

set in position T.

Studer Innotec SA

Xcom-GSM/Xcom-LAN

10 V1.0.5 User manual

4CONFIGURING THE XCOM-232I

For the installation to function properly, the Xcom-232i must first be configured as shown,

step-by-step, in this chapter.

The use of a RCC-02/03 will facilitate the installation of the Xcom-

232i. It will show

messages in case of error.

4.1 DOWNLOAD THE SOFTWARE

Go on the Studer Innotec website:

http://www.studer-innotec.com -> Support -> Download Center -> Softwares and Updates

Download the package "Xcom Configurator".

4.2 INSERT THE SD CARD

Insert the SD card into your PC and run the "XCOM Configurator".

4.3 SELECT THE SD CARD DRIVE

Choose the drive where the SD card is situated.

Figure 4.2 : Choose the drive

Figure 4.1 : Studer Innotec SA website

Choose the SD card drive

Andere Handbücher für Xcom-GSM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Studer Konferenzsystem Handbücher

Studer

Studer Xcom-232i Bedienungsanleitung

Studer

Studer Xcom-GSM Bedienungsanleitung

Studer

Studer Xcom-LAN Bedienungsanleitung

Studer

Studer Xcom-GSM Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung