Su-Kam FRENDY Bedienungsanleitung

DIGITAL HOME UPS

USER'S MANUAL (IFU)

Before connecting, operating, or adjusting this unit, please read this instruction booklet carefully .

7M i c r o c o n t r o l l e r b a s e d

technology using MOSFETs

7Fuzzy logic control - a unique &

advanced technology

7Smart overload sense and short

circuit protection

7Automatic low battery cutout

7PWM controlled efficient fast

charging

7Great power saving

7User-friendly LED indication

Salient features

GLOBAL CERTIFICATIONS:GLOBAL CERTIFICATIONS:

GOVERNMENT OF INDIAGOVERNMENT OF INDIA

MINISTRY OF SCIENCE & TECHNOLOGYMINISTRY OF SCIENCE & TECHNOLOGY

R&DR&D

Recognised Recognised

ISO 14001:2004

Customer Care : +91 124 4170561-566Customer Care : +91 124 4170561-566

Dear Customer,

Congratulation as choosing Su-Kam Digital Home UPS! This Digital Home UPS

has been developed using state-of-the-art Micro controller based technology.

Some of the distinguishing features of the Su-Kam Digital Home UPS :

This manual will help you to better understand your Digital Home UPS , increase

your convenience in using it and maximize its benefits for you..

Feel free to contact our authorized dealer or us at [email protected] or

visit our website www.su-kam.com anytime for any clarification or more

information. We value your suggestions and comments. Su-Kam is committed to

continual product improvement and feel the best way to accomplish this task is by

listening our valued customers. This commitment gets strengthened every time

you buy a Su-Kam product.

We appreciate the support you have shown us through the purchase of our

product. Please read this manual to become familiar with its features and various

applications.

Regards,

Su-Kam Power Systems Limited

7M i c r o c o n t r o l l e r b a s e d 7 P W M controlled efficient fast

technology using MOSFETs charging

Great power saving

Fuzzy logic control-a unique & 7

advanced technology 7User-friendly LED indication

7Smart overload sense and short

circuit protection

7Automatic low battery cutout

REV. 08-02-07

DIGITAL

HOME UPS

Introduction

REV. 08-02-07

DIGITAL

HOME UPS

CONTENT

]KNOWING YOUR HOME UPS

(A) FRONT PANEL...........................................................................................1-2

(B) BACK PANEL................................................................................................3-4

]IMPORTANT SAFETY INSTRUCTIONS...................................................4-5-6

]SPECIAL NOTICES...............................................................................................6

]TROUBLE SHOOTING.......................................................................................7

]TECHNICAL SPECIFICATIONS....................................................................8-9

]WARRANTY CARD............................................................................................10

Contents

REV. 08-02-07

DIGITAL

HOME UPS

KNOWING Y OUR HOME UPS

Now lets begin the journey to explore various aspect of your Su-Kam Digital

Home UPS. Welcome aboard!

In its most basic form, an Digital Home UPS transforms Direct Current (DC) to

Alternating Current (AC). The battery bank with the Digital Home UPS acts as a

reservoir to ensure continuous supply of power whenever mains supply from

utility power is not available.

On the front panel of the digital Home UPS there is one Power Active switch and

a graphical symbol panel, for indications.

1. MAINS ON : This white graphical symbol, when lit, indicates that incoming

mains is available.

2. INV. ON : This white graphical symbol shows that incoming mains is not

available and the output is from Home UPS.

3. BATT. CHARGING / CHARGED : This white graphical symbol, shows

that the incoming mains is available and simultaneously the battery is also

being charged . This white graphical symbol, glows intermittently during

charging and glows continuously when battery is charged.

4. FUSE BLOWN : Mains fuse blows off when the Home UPS is operating on

mains and the load connected through the Home UPS exceeds the specified

limits prescribed for the Home UPS. In this case, at once reduce the extra

load and replace the glass fuse given at back to restore the mains line. During

this stage, the Mains ON graphical symbol, glows intermittently with buzzer

beeps .

FRONT VIEW:

. O

B L W

CGE

H R

V LOAD

A O

MIS

Front

Panel

MAINS ON BATT. CHRG.

INV. ON OVER LOAD

BATT. LOW

REV. 08-02-07

DIGITAL

HOME UPS

5. LOW BATT. : This graphical symbol, appeals when battery voltage goes

down to a low limit during discharge. The Digital home UPS will shut

down automatically after a few minutes. During this stage the graphical

symbol glows and the buzzer gives continuous beep.

6. O.L. / SHORT CIRCUIT : This graphical symbol, shows that either

Short circuit has occurred or there is overload on the Home UPS. The

Digital Home UPS resets itself automatically and makes 8 attempts in

case of overload and 4 attempts in case of short circuit to switch ON. If

the overload or short circuit continues even after these attempts, the

Digital Home UPS switches OFF and will switch ON only after the

power active switch is first OFF and then put ON. In the event of

unsuccessful attempts the Digital Home UPS automatically shuts down.

During overload or short circuit the graphical symbol glows and the

buzzer gives a intermittent beep. If there is short circuit at the output,

the Digital Home UPS will switch OFF permanently after a few attempts.

It can be reset by repairing the short circuit and then switching OFF and

ON the power active switch.

7. POWER ACTIVE SWITCH : The latching ON/OFF switch in the front is

to be pressed to ensure that the Digital Home UPS switch on in the event of

mains failure and connected load is energised by Digital Home UPS.

Front

Panel

REV. 08-02-07

DIGITAL

HOME UPS

The has two battery wires coming out from the rear side,

a Fuse holder, 2 toggle switches, an output Socket and an input mains

or 3 way cable .We connect the two battery wires to the terminals of the

battery, the red coloured to positive terminal and the black coloured to the

negative. A three core input cable has to be used to connect the

to incoming AC Mains. Ensure that incoming phase (or line) is

connected to line (Red wire) neutral is connected to neutral (Black Wire)

and earth is connected to earth (Green Wire). After this the output is

connected through the output socket at the rear of the

Digital Home UPS

home

UPS

Home UPS.

BACK PANEL:

REAR VIEW:

1. 3 Core Input Wire (Mains Input for Home UPS).

2. 15A AC Output Socket.

3. F6.3A/250V (Fast Blow) Fuse upto 800VA.

4. Toggle Switch Narrow Window(UPS) / Wide

Window (INV) mode.

5. Toggle Switch Normal Charging Current (NC)/

High Charging Current (HC) mode

6. Battery Wires.

1. Position the Toggle Switch(4) at the rear panel of the Home UPS to

Narrow window (UPS) mode if you want to run PC load otherwise always

place the switch to Wide Window(INV) mode.

2. Position the Toggle switch(5) to HC mode during frequent power cuts

for fast charging of battery otherwise place to NC mode.

OUTPUTOUTPUT INV

(RED)

RED

(BLACK)

BLACK

GREEN

BATTERY WIRES

UPS

Note :

Back

Panel

Back panel view 600&800VA

IMPORTANT SAFETY INSTRUCTIONS

Before proceeding further kindly go through the safety instructions

carefully.

General Precautions:

1. Before using the Home UPS read all instructions and cautionary markings

on the Home UPS, the Batteries, all appropriate section of this instruction

manual.

2. Do not expose Home UPS to rain, liquids of any type. The Home UPS is

designed for interiors only.

3. Do not disassemble the Home UPS, take it to a Su-Kam Engineering

Service Centre when service or repair is required. Opening by unqualified

personnel entails electric shock or fire hazard.

4. To reduce risk of electric shock, disconnect all wiring before cleaning.

OUTPUTOUTPUT

INV

(RED) (BLACK)

UPS

Input

N E L

1. Input Terminal Block (Mains Input for Home UPS).

2. 15A AC Output Socket.

3. T10A/250V (Slow Blow ) Fuse.

4. Toggle Switch Narrow Window (UPS)/ Wide

Window (INV) mode.

5. Toggle Switch Normal Charging Current (NC)/

High Charging Current (HC) mode

6. Battery Wires.

Back panel view 1400VA

REV. 08-02-07

DIGITAL

HOME UPS

Safety

Instructions

1. 3 Core Input Wire (Mains Input for

Home UPS).

2. 6A AC Output Socket.

3. F6.3A/250V (Fast Blow).

4. Toggle Switch Narrow Window(UPS)

/ Wide Window (INV) mode.

5. Battery Wires.

OUTPUTOUTPUT INV

(RED)

RED

(BLACK)

BLACK

BATTERY WIRES

UPS

Back panel view 400VA

GREEN

8. Be extra cautious when working with metal tools on and around batteries.

It could short-circuit the batteries or other electrical parts, producing a spark

that could cause an explosion.

9. Remove conductive jewelry such as rings, bracelets, necklaces, and watches

when working with a battery. A battery can produce a short-circuit current

high enough to weld a ring or causing severe burns.

5. Warning-Risk of Explosive gases

WORKING IN THE VICINITY OF A LEAD ACID BATTERY

MAY BE DANGEROUS. BATTERIES GENERATE EXPLOSIVE

GASES DURING NORMAL OPERATION.

Provide ventilation to outdoors from the Battery compartment.

The battery enclosures should be designed to prevent accumulation and

concentration of hydrogen gas in“pockets’’ at the top of the compartment.

V ent the battery compartment from the highest point. A sloped lid can also be

used to direct the flow to the vent opening location. To reduce the risk of

battery explosion, follow all the instructions of batteries supplier or any

equipment you intend to use in the vicinity of batteries.

6. Do not cover your Home UPS with any cover or cloth.

7. Do not install this Home UPS on or near flammable materials (plywood,

Chemicals, gasoline etc.).

REV. 08-02-07

DIGITAL

HOME UPS

Safety

Instructions

Special Notices:

!Do not switch on the heavy load TV, Refrigerators, Motor, Cooler, etc when

Home UPS is running on battery backup and is in UPS mode. This may

cause rebooting of your computer.

!Avoid connecting the stabilizer between utility power and Home UPS. The

AVR of stabilizer may cause your computer to reboot.

!We recommend that you have point to point wiring of the Home UPS.

GROUNDING INSTRUCTIONS: This Home UPS must be

connected to a grounded, permanent wiring system.

IMPORTANT PRECAUTIONS:

The output side of the AC wiring should never be connected to a

generator or incoming utility power. This condition is far worse than a short

circuit. If the unit survives this condition, it will shut down until correction is

made.

Note : Never disconnect the battery cables while the is delivering

power or battery charger is operating. The Power Active Switch has no effect on

the charger; it turns off only the power output during backup mode. To disconnect

the batteries for service:

(a) turn off the power switch.

(b) disconnect all AC power.

Home UPS

REV. 08-02-07

DIGITAL

HOME UPS

Special

Notices

TROUBLE SHOOTING

REV. 08-02-07

DIGITAL

HOME UPS

Trouble

Shooting

Symptoms

Main power is coming. Home UPS

shows mains fuse blown on its display

panel.

No power during backup mode.

Home UPS does not operate.

Home UPS trips frequently at backup

mode.

Check the battery connections and the mains connections

Symptoms

There is no output power

System shuts down after

20 sec no display at all

Low/High AC output

voltage

Low surge power

Problem

(1) Low Battery.

(2) Loose or corroded batt. Connections.

(3) Loose AC output connection.

Output of home UPS is wired back to its

own input.

Remedy

Check condition of batteries and recharge.

Check and clean all connections.

Check all AC output connections.

Check for proper AC input and output wiring.

Meter must be a true RMS reading meter.

Refer to cable and battery recommendations

in this manual.

Weak batteries, battery cable too long.

Measuring with the wrong type Voltmeter.

Reduce the load and restart Home UPS through Power Active Switch.

Reduce the load and replace the glass fuse of specified ratings given at

rear side of the home UPS.

(1) Check if low battery graphic symbol is glowing, switch OFF the Home

UPS by power active switch. Allow the battery to charge when the mains is

resumed before running the Home UPS on battery again.

(2) Check if overload/short circuit graphic symbol is glowing.Reduce load

and reset theHome UPS by Power Active switch.

Rectifications

Dieses Handbuch passt für folgende Modelle

Andere Su-Kam UPS Handbücher

Su-Kam

Su-Kam Fusion Series Bedienungsanleitung

Su-Kam

Su-Kam Brainy Eco Solar Home UPS 1100 Bedienungsanleitung

Su-Kam

Su-Kam DSP SINEWAVE Bedienungsanleitung

Su-Kam

Su-Kam STURDY Bedienungsanleitung

Su-Kam

Su-Kam shiny 700 Bedienungsanleitung

Su-Kam

Su-Kam SU600WB Bedienungsanleitung

Su-Kam

Su-Kam IntelliQ Series Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung