Subaru 2001 IMPREZA Bedienungsanleitung
FUJI HEAVY INDUSTRIES LTD. G1830GE6
2001 IMPREZA SERVICE MANUAL QUICK REFERENCE INDEX
BODY SECTION
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reas-
sembling, inspection and adjustment of
components and diagnostics for guid-
ance of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
All information, illustration and specifi-
cations contained in this manual are
based on the latest product information
available at the time of publication
approval.
HVAC SYSTEM
(HEATER, VENTILATOR AND A/C) AC
HVAC SYSTEM (AUTO A/C)
(DIAGNOSTICS) AC
AIRBAG SYSTEM AB
AIRBAG SYSTEM (DIAGNOSTICS) AB
SEAT BELT SYSTEM SB
LIGHTING SYSTEM LI
WIPER AND WASHER SYSTEMS WW
ENTERTAINMENT ET
COMMUNICATION SYSTEM COM
GLASS/WINDOWS/MIRRORS GW
BODY STRUCTURE BS
INSTRUMENTATION/DRIVER INFO IDI
SEATS SE
SECURITY AND LOCKS SL
IMMOBILIZER (DIAGNOSTICS) IM
SUNROOF/T-TOP/CONVERTIBLE TOP
(SUNROOF) SR
EXTERIOR/INTERIOR TRIM EI
2001 IMPREZA SERVICE MANUAL QUICK REFERENCE INDEX
BODY SECTION
G1830GE6
EXTERIOR BODY PANELS EB
CRUISE CONTROL SYSTEM CC
CRUISE CONTROL SYSTEM
(DIAGNOSTICS) CC
CRUISE CONTROL SYSTEM CC
Page
1. General Description ....................................................................................2
2. Actuator.......................................................................................................3
3. Cruise Control Module ................................................................................4
4. Cruise Control Main Switch.........................................................................5
5. Cruise Control Command Switch................................................................6
6. Stop and Brake Switch................................................................................7
7. Clutch Switch ..............................................................................................8
8. Inhibitor Switch............................................................................................9
CC-2
CRUISE CONTROL SYSTEM GENERAL DESCRIPTION
1. General Description
A: COMPONENT
B: CAUTION
•Before disassembling or reassembling parts, al-
ways disconnect the battery ground cable. When
repairing the radio, control module and other parts
with memory functions, make note of the memory
before disconnecting the battery ground cable. All
memory will be erased.
•Reassemble parts in the reverse order of disas-
sembly unless otherwise indicated.
•Adjust parts to specifications specified in this
manual.
•Connect connectors and hoses securely during
reassembly.
•After reassembly, ensure functional parts oper-
ate properly.
C: PREPARATION TOOL
(1) Actuator (4) Cruise control main switch (7) Cruise control module
(2) Inhibitor switch (AT) (5) Clutch switch (MT)
(3) Cruise control command switch (6) Stop and brake switch
BO0002
TOOL NAME REMARKS
Circuit Tester Used for measuring resis-
tance and voltage.
CC-3
CRUISE CONTROL SYSTEM
ACTUATOR
2. Actuator
A: REMOVAL
CAUTION:
•Be careful not to apply excessive load to the
wire cable when adjusting and/or installing;
otherwise, the actuator may be deformed or
damaged.
•Do not bend cable sharply with a radius less
than 100 mm (3.94 in); otherwise, cable may
bend permanently, resulting in poor perfor-
mance.
•When installing cable, be careful not to
sharply bend or pinch the inner cable; other-
wise, the cable may break.
1) Remove clip bands from cruise control cable.
2) Loosen nut which secures cruise control cable
end to throttle cam and then remove cable from
throttle cam.
3) Remove actuator attaching bolts.
4) Remove actuator while disconnecting connec-
tor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
NOTE:
(A): Must be adjusted when cable end outer is fixed
in place, so that gap between throttle cam and lever
is 0 —1 mm (0 —0.04 in).
(Must be attached while throttle cam is being pulled
by wire cable.)
(B): Must be coated evenly on cam end inner con-
nection.
(C): Cover must be inserted securely, until tip of ca-
ble touches cover stopper.
C: INSPECTION
Measure resistance between cruise control actua-
tor terminals.
If NG, replace cruise control actuator.
S6M0088
BO0003
Tester connection Resistance (Ω)
4 —1 Approx. 5
4 —2 Approx. 5
4 —5 Approx. 5
3 —6Approx.39
B6M1213A
B6M1568
CC-4
CRUISE CONTROL SYSTEM CRUISE CONTROL MODULE
3. Cruise Control Module
A: REMOVAL
1) Remove side sill front cover.
2) Disconnect connector from cruise control mod-
ule.
3) Remove the volt, then detach cruise control
module.
B: INSTALLATION
Install is in the reverse order of removal.
: Hook pawl BO0004
BO0005
CC-5
CRUISE CONTROL SYSTEM
CRUISE CONTROL MAIN SWITCH
4. Cruise Control Main Switch
A: REMOVAL
1) Remove screws and clip from instrument panel
lower cover.
2) Remove instrument panel lower cover.
3) Disconnect connector from cruise control main
switch.
4) Remove main switch by pushing it outward.
B: INSTALLATION
Install is in the reverse order of removal.
C: INSPECTION
Check continuity between cruise control main
switch terminals.
If NG, replace cruise control main switch.
BO0006
BO0002
Cruise control
main switch BO0007
BO0008
Switch position Tester connection Specified condi-
tion
OFF 3 —5 No continuity
ON 3 —5Continuity
G6M0244
CC-6
CRUISE CONTROL SYSTEM
CRUISE CONTROL COMMAND SWITCH
5. Cruise Control Command
Switch
A: REMOVAL
WARNING:
Before servicing, be sure to read the notes in
the AB section for proper handling of the driv-
er's airbag module. <Ref. to AB-3, CAUTION,
General Description.>
1) Set front wheels in straight ahead position.
2) Turn ignition switch OFF.
3) Disconnect battery ground cable from battery
and wait for at least 20 seconds before starting
work.
4) Using TORX®BIT T30 (Tamper resistant type),
loosen two TORX®bolts which secure driver's air-
bag module.
5) Disconnect airbag module connector on back of
airbag module.
6) Remove horn switch from steering wheel as
shown.
7) Disconnect horn and cruise control command
switch connector, then remove cruise control com-
mand switch.
B: INSTALLATION
Install is in the reverse order of removal.
C: INSPECTION
Check continuity between cruise control command
switch terminals.
If NG, replace cruise control command switch.
H5M0662A
S6M0095
Switch Position Tester con-
nection Specified
condition
CANCEL ON 1 (+) —2 (−)Continuity
ON 1 (+) —3 (−)Continuity
SET/COAST OFF 1 —3 No continuity
ON 1 —3 Continuity
RESUME/
ACCEL OFF 1 —2 No continuity
ON 1 —2 Continuity
S6M0096
B6M1406
CC-7
CRUISE CONTROL SYSTEM
STOP AND BRAKE SWITCH
6. Stop and Brake Switch
A: REMOVAL
Disconnect connector from switch, and then re-
move the switch. <Ref. to BR-77, REMOVAL, Stop
Light Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Check continuity brake switch (1) and stop light
switch (2) between terminals.
If NG, replace stop and brake switch.
Switch Pedal Tester con-
nection Specified
condition
Brake Released 1 —4 Continuity
Depressed 1 —4 No continuity
Stop light Released 2 —3 No continuity
Depressed 2 —3 Continuity
B6M1564A
CC-8
CRUISE CONTROL SYSTEM CLUTCH SWITCH
7. Clutch Switch
A: REMOVAL
Disconnect the connectorfromthe switch, and then
remove the switch. <Ref. to CL-34, DISASSEM-
BLY, Clutch Pedal.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Check continuity between clutch switch terminals.
If NG, replace the clutch switch.
Switch Pedal Tester con-
nection Specified
condition
Clutch Released 1 —2Continuity
Depressed 1 —2 No continuity
G6M0184
Andere Handbücher für 2001 IMPREZA
19
Inhaltsverzeichnis
Andere Subaru Automobil Handbücher
Subaru
Subaru 2003 Legacy Bedienungsanleitung
Subaru
Subaru 2001 Forester Bedienungsanleitung
Subaru
Subaru B9 TRIBECA WX 2007 Bedienungsanleitung
Subaru
Subaru Forester 2018 Bedienungsanleitung
Subaru
Subaru Forester 2020 Bedienungsanleitung
Subaru
Subaru 2003 Legacy Bedienungsanleitung
Subaru
Subaru 2014 Forester Installationsanleitung
Subaru
Subaru BRZ 2018 Bedienungsanleitung
Subaru
Subaru 2011 Tribeca Bedienungsanleitung
Subaru
Subaru 2002 Legacy Bedienungsanleitung
Subaru
Subaru 2002 Forester Bedienungsanleitung
Subaru
Subaru Impreza Outback Sport Bedienungsanleitung
Subaru
Subaru 2008 IMPREZA Referenzhandbuch
Subaru
Subaru Impreza Installationsanleitung
Subaru
Subaru 2013 Forester Bedienungsanleitung
Subaru
Subaru Legacy 2023 Bedienungsanleitung
Subaru
Subaru 2008 IMPREZA WRX Bedienungsanleitung
Subaru
Subaru 2001 IMPREZA Bedienungsanleitung
Subaru
Subaru Tribeca 2010 Bedienungsanleitung
Subaru
Subaru 2001 IMPREZA Bedienungsanleitung
