Subaru 2017 Legacy Bedienungsanleitung
113
PHONE
4
4
docstructure.indb 113 2016/03/30 11:15:51
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
114
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
QUICK REFERENCE
The phone top screen can be used to make a phone call. To
display the hands-free operation screen, select and
then select
PHONE
(PHONE), select *, or press
the switch on the steering wheel.
Several functions are available to operate on each screen
that is displayed by selecting the 4 tabs.
*: Without navigation function
Function Page
Phone
operation
Registering/connecting Bluetooth phone 174
Calling on the Bluetooth phone 118
Receiving on the Bluetooth phone 124
Talking on the Bluetooth phone 125
Message
function
Using the Bluetooth phone message
function 127
Setting up
a phone
Phone settings 133
Bluetooth settings 179
docstructure.indb 114 2016/03/30 11:15:52
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
115
PHONE
4
SOME BASICS
The hands-free system enables calls to be made and
received without having to take your hands off the steering
wheel.
This system supports Bluetooth. Bluetooth is a wireless
data system that enables cellular phones to be used without
being connected by a cable or placed in a cradle.
The operating procedure of the phone is explained here.
WARNING
lWhile driving, do not use a cellular phone or connect the
Bluetooth phone.
lYour audio unit is tted with Bluetooth antennas. People with
implantable cardiac pacemakers, cardiac resynchronization
therapy-pacemakers or implantable cardioverter debrillators
should maintain a reasonable distance between themselves
and the Bluetooth antennas. The radio waves may affect the
operation of such devices.
lBefore using Bluetooth devices, users of any electrical
medical device other than implantable cardiac pacemakers,
cardiac resynchronization therapy-pacemakers or implantable
cardioverter debrillators should consult the manufacturer
of the device for information about its operation under the
inuence of radio waves. Radio waves could have unexpected
effects on the operation of such medical devices.
CAUTION
lDo not leave your cellular phone in the vehicle. The
temperature inside may rise to a level that could damage the
phone.
NOTE
lIf your cellular phone does not support Bluetooth, this system
cannot function. Certain functions may not be available
depending on the type of cellular phone.
lIn the following conditions, the system may not function:
• The cellular phone is turned off.
• The current position is outside the communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
lWhen using the hands-free function and other Bluetooth
functions at the same time, the following problems may occur:
• The Bluetooth connection may be cut.
• Noise may be heard when playing back voice with the
Bluetooth function.
lThe other party’s voice will be heard from the front speakers.
The audio/visual system will be muted during phone calls or
when hands-free voice commands are used.
lTalk alternately with the other party on the phone. If both parties
speak at the same time, the other party may not hear what has
been said. (This is not a malfunction.)
docstructure.indb 115 2016/03/30 11:15:52
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
116
NOTE
lKeep call volume down. Otherwise, the other party’s voice
may be audible outside the vehicle and voice echo may
increase. When talking on the phone, speak clearly towards the
microphone.
lThe other party may not hear you clearly when:
• Driving on an unpaved road. (Making excessive trafc noise.)
• Driving at high speeds.
• Driving with a window open.
• When air from the ventilator blows directly toward the
microphone.
• The sound of the air conditioning fan is loud.
• There is a negative effect on sound quality due to the phone
and/or network being used.
REGISTERING/CONNECTING A Bluetooth
PHONE
To use the hands-free system for cellular phones, it is
necessary to register a cellular phone with the system.
(→P.174)
Bluetooth PHONE CONDITION DISPLAY
The condition of the Bluetooth phone appears on the upper
right side of the screen. (→P.26)
USING THE PHONE SWITCH/MICROPHONE
XSteering switch
By pressing the phone switch, a call can be received or
ended without taking your hands off the steering wheel.
Volume control switch
●Press the “+” side to increase the volume.
●Press the “-” side to decrease the volume.
Off hook switch
On hook switch
docstructure.indb 116 2016/03/30 11:15:53
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
117
PHONE
4
XMicrophone
The microphone is used when talking on the phone.
VOICE RECOGNITION SYSTEM
Press this switch to operate the voice recognition system.
●The voice recognition system and its list of
commands can be operated. (→P.256)
ABOUT THE CONTACTS IN THE CONTACT
LIST
●The following data is stored for every registered
phone. When another phone is connected, the
following registered data cannot be read:
• Contact data
• Call history data
• Speed dial data
• Image data
• All phone settings
• Message settings
NOTE
lWhen a phone’s registration is deleted, the above-mentioned
data is also deleted.
docstructure.indb 117 2016/03/30 11:15:53
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
118
WHEN SELLING OR DISPOSING OF THE
VEHICLE
A lot of personal data is registered when the hands-free
system is used. When selling or disposing of the vehicle,
initialize the data. (→P.192)
●The following data in the system can be initialized:
• Contact data
• Call history data
• Speed dial data
• Image data
• All phone settings
• Message settings
NOTE
lOnce initialized, the data and settings will be erased. Pay close
attention when initializing the data.
CALLING ON THE Bluetooth
PHONE
After a Bluetooth phone has been registered, a call can
be made using the hands-free system. There are several
methods by which a call can be made, as described below.
XWithout navigation function
1. Select .
2. Select the desired tab to call from.
docstructure.indb 118 2016/03/30 11:15:53
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
119
PHONE
4
XWith navigation function
1. Select .
2. Select
PHONE
(PHONE).
3. Select the desired tab to call from.
●The phone top screen can be displayed by pressing
the switch on the steering wheel.
How to make a call list Page
By speed dial list 120
By call history 120
By contacts list 121
By dial pad*1122
By e-mail/SMS/MMS 131
By POI call*2201
By off hook switch 123
By voice recognition system 258
By split screen 123
*1: The operation cannot be performed while driving.
*2: With navigation function
docstructure.indb 119 2016/03/30 11:15:53
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
120
BY SPEED DIAL LIST
Calls can be made using registered contacts which can be
selected from a contact list. (→P.140)
1. Display the phone top screen. (→P.118)
2. Select the
Speed Dial
(Speed Dial) tab and then
select the desired contact.
3. Select the desired number.
4. Check that the “Call (Call)” screen is displayed.
BY CALL HISTORY
Up to 30 of the latest call history items (missed, incoming
and outgoing) can be selected from the
Call History
(Call
History) tab.
1. Display the phone top screen. (→P.118)
2. Select the
Call History
(Call History) tab and then
select or the desired contact.
●The icons of call type are displayed.
• : Missed call
• : Incoming call
• : Outgoing call
docstructure.indb 120 2016/03/30 11:15:54
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
121
PHONE
4
XWhen is selected
3. Check that the “Call (Call)” screen is displayed.
XWhen the desired contact is selected
3. Select corresponding to the desired number to call.
4. Check that the “Call (Call)” screen is displayed.
NOTE
lWhen making a call to the same number continuously, only the
most recent call is listed in call history.
lWhen a phone number registered in the contact list is received,
the name is displayed.
lInternational phone calls may not be made depending on the
type of cellular phone you have.
lThe list should group together consecutive entries with the same
phone number and same call type. For example, two calls from
Kay Rowles’s mobile would be displayed as follows: Kay Rowles
(2)
BY CONTACTS LIST
Calls can be made by using contact data which is
transferred from a registered cellular phone. (→P.122)
Up to 2500 contacts (maximum of 4 phone numbers and
e-mail addresses per contact) can be registered in the
contact list.
1. Display the phone top screen. (→P.118)
2. Select the
Contacts
(Contacts) tab and then select the
desired contact.
3. Select the desired number.
4. Check that the “Call (Call)” screen is displayed.
docstructure.indb 121 2016/03/30 11:15:55
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
122
WHEN THE CONTACT IS EMPTY
nFOR PBAP COMPATIBLE Bluetooth PHONES
When “Automatic Contact/History Transfer (Automatic
Contact/History Transfer)” is set to on, contacts are
transferred automatically. (→P.135)
nFOR OPP COMPATIBLE Bluetooth PHONES
Contacts can be transferred or added manually.
To transfer, select
Update Contacts from Phone
(Update
Contacts from Phone) at the “Contact/Call History Settings
(Contact/Call History Settings)” screen. (→P.137)
To add, select
New Contact
(New Contact) at the
“Contact/Call History Settings (Contact/Call History
Settings)” screen. (→P.137)
BY DIAL PAD
1. Display the phone top screen. (→P.118)
2. Select the
Dial Pad
(Dial Pad) tab and enter the phone
number.
3. Select or press the switch on the steering
wheel.
4. Check that the “Call (Call)” screen is displayed.
NOTE
lDepending on the type of Bluetooth phone being connected, it
may be necessary to perform additional steps on the phone.
docstructure.indb 122 2016/03/30 11:15:56
Andere Handbücher für 2017 Legacy
5
Inhaltsverzeichnis
Andere Subaru Automobil Handbücher
Subaru
Subaru Forester 2017 Bedienungsanleitung
Subaru
Subaru WRX 2021 Bedienungsanleitung
Subaru
Subaru 2014 XV Crosstrek Bedienungsanleitung
Subaru
Subaru Legacy 2.5GT Premium Bedienungsanleitung
Subaru
Subaru 2010 IMPREZA 2.5i Bedienungsanleitung
Subaru
Subaru 2005 Baja Bedienungsanleitung
Subaru
Subaru Forester Bedienungsanleitung
Subaru
Subaru 2003 Legacy Bedienungsanleitung
Subaru
Subaru 2003 Legacy Bedienungsanleitung
Subaru
Subaru 2013 Forester Bedienungsanleitung
Subaru
Subaru Outback Handbuch
Subaru
Subaru Impreza Bedienungsanleitung
Subaru
Subaru Tribeca Bedienungsanleitung
Subaru
Subaru 2006 Baja Bedienungsanleitung
Subaru
Subaru SUPPLEMENT FOR 6 CYLINDER ENGINE Bedienungsanleitung
Subaru
Subaru 2011 Forester Konfigurationshandbuch
Subaru
Subaru Outback Bedienungsanleitung
Subaru
Subaru Legacy 2015 Installations- und Betriebshandbuch
Subaru
Subaru 2009 Legacy Bedienungsanleitung
Subaru
Subaru Legacy 2022 Bedienungsanleitung
