Subaru BRZ2017 Bedienungsanleitung
2017 Quick Reference Guide
2
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
Remote keyless entry system
Remote
transmitter key
(if equipped)
Access key
(if equipped)
Lock/Unlock doors
BASIC OPERATION
All doors and trunk will be locked/unlocked by the following procedures carrying the access
key on your person. (The driver should always carry the access key.)
For detailed operating and safety information, please refer to
your Owner’s Manual.
Keyless access function (if equipped)
1Locks both side doors
2The driver’s door will be unlocked.
(To unlock other doors, briey press the
button a second time within 3 seconds.)
3Unlocks the trunk lid (press and hold)
4Sounds the alarm (press and hold)
*Grip the driver’s door handle to unlock the
driver’s door. Grip the passenger’s door
handle to unlock all doors.
Side door: Unlocking the trunk lid:
34
2
1
1
2
3
4
Lock
Unlock*
Grip
Touch
Press
Lock sensor
(the indentation on the side
of the door handle)
3
Ignition switch must be in ACC or ON.
1Turn the control switch to the side that you want
to adjust. Lis for the left mirror, Ris for the right
mirror.
2Move the control switch in the direction you want
to adjust the mirror.
Adjust each component
1Seat position adjustment
2Seatback angle adjustment
3Vertical height adjustment (driver’s side only)
4Seatback fold strap
Front seat
Tilt/telescopic steering wheel
Outside rear view mirror switch
1Hold the steering wheel and push the lever down.
2Adjust to the ideal position by moving the steering
wheel horizontally and vertically.
3After adjustment, pull the lever up to secure the
steering wheel.
1
2
3
1 2
1
24
3
2
4
Getting in the rear seats:
Lift the seatback angle adjustment
lever.
Getting out the rear seats:
Pull the seatback fold strap.
The seat can be slid forward and backward. (Front passenger seat only)
4
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
Start/Stop engine
Push-button ignition switch (if equipped)
Engine (ignition) switch (if equipped)
Performing the following operations when carrying the access key on your person starts the
engine or changes push-button ignition switch modes.
Starting the engine;
STEP1: Check that the parking brake is set.
STEP2: Check that the select lever is set in P(AT models).
Check that the shift lever is set in neutral (MT models).
STEP3: Firmly depress the brake pedal (AT models).
Firmly depress the clutch pedal (MT models).
The push button start system indicator light (green) will
turn on.
STEP4: Press the push-button ignition switch.
Stopping the engine;
STEP1: Stop the vehicle (AT models). While depressing the
clutch pedal, stop the vehicle (MT models).
STEP2: Shift the select lever to P(AT models). Shift the shift lever to neutral (MT models).
STEP3: Set the parking brake.
STEP4: Release the brake pedal (AT models). Release the clutch pedal (MT models).
STEP5: Press the push-button ignition switch.
STEP6: Check that the keyless access with push button start system indicator light (green) is off.
Off (Turned off) ACC (Green) ON (Green)
Modes can be changed by pressing the push-button ignition switch with the brake
pedal (vehicles with an automatic transmission) or clutch pedal (vehicles with a manual
transmission) released. (The mode changes each time the switch is pressed)
Changing push-button ignition switch mode
LOCK : The steering wheel is locked and the key can be
removed. (Vehicles with an automatic transmission:
The key can be removed only when the select lever
is in P.)
ACC : Some electrical components such as the power
outlet can be used.
ON : All electrical components can be used.
START : The engine can be started.
Flashes slowly Flashes slowly
5
Operate Select lever/Shift lever
Automatic transmission (if equipped)
Manual transmission (if equipped)
P = Parking/Starting the engine
R = Reversing
N = Neutral
D = Drive:
For normal driving/Temporary manual mode
driving
M = Manual mode
Manual mode driving:
To enter manual mode, shift the select lever to the Mposition.
While the engine switch is in the ON position or the push-button ignition switch is in
ON mode, move the select lever with the brake pedal depressed.
Temporary manual mode driving (vehicles with
paddle shift levers):
Temporary manual mode driving can be changed to by
operating the paddle shift levers while the select lever is
in the Dposition.
Shifting the shift lever to R
Shift the shift lever to Rwhile lifting up the ring section.
Downshift (-) Upshift (+)
6
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
MAIN PARTS AND OPERATION
1Headlights
2 High/lowbeamchange,Highbeamash
3Turn signal
4Front fog lights (if equipped)
Headlight switch/Turn signal lever/Front fog light switch (if equipped)
A
1Wiper:
To operate, push lever down/up to the following positions:
: Temporary
: Off
: Intermittent
: Low speed
: High speed
2Intermittent interval
3Washer/wiper dual operation
Windshield wiper and washer switch
B
43
3
1
2
1
2
3
A
H
G
D
I
F
J
E
B
C
7
Hazardwarningasherswitch
C
Instrument panel light control dial
D
All the turn signal lights will ash.
Use the switch to warn other drivers.
Windshield defogger/Rear window defogger switch
E
Type A Type B
1Windshield defogger:
The dehumidication function operates and fan speed increases.
Set the outside/recirculated air mode button to outside air mode if the recirculated air
mode is used. (It may switch automatically.)
2Rear window defogger switch:
The rear window defogger and the outside rear view mirror defogger (if equipped) turns
on. The function will automatically turn off after approximately 15 min.
Press
Brighter
Darker
1
2
1
2
8
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
1Closing
2One-touch closing*
3Opening
4One-touch opening*
* : Pushing the switch in the opposite direction will stop
window travel partway.
5Window lock switch
1Locks both side doors
2Unlocks both side doors
Power windows switches
H
Power door lock switch
I
Trunk lid opener switch
FEngine hood lock release lever
G
1
2
4
5
3
1
2
Pull
Press and hold
9
Fuelllerlidopener
J
Front seatbelt guide
To enable the seatbelt to be easily extended, pass the
seatbelt through the guide.
When getting in or out of the rear seats, release the
seatbelt from the guide.
Seat heater switches (if equipped)
Pull up
Rapid heating
Normal heating
10
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
FUNCTION FOR MORE COMFORTABLE DRIVE
Cruise control switch
A
1ON-OFF button: To activate and deactivate
2 + R E S▲/- S E T▼:
+RES▲ side: To increase the speed/To resume
-SET▼ side : To set speed/To decrease the speed
3CANCEL: To cancel
Use the cruise control to maintain a set speed without
depressing the accelerator pedal.
1
2
3
2
E F
AG
C DB
Andere Handbücher für BRZ2017
2
Inhaltsverzeichnis
Andere Subaru Automobil Handbücher
Subaru
Subaru Impreza 2004 Bedienungsanleitung
Subaru
Subaru Forester EyeSight 2015 Bedienungsanleitung
Subaru
Subaru 2008 IMPREZA Bedienungsanleitung
Subaru
Subaru 2004 LEGACY Bedienungsanleitung
Subaru
Subaru Outback 2018 Bedienungsanleitung
Subaru
Subaru BRZ 2022 Bedienungsanleitung
Subaru
Subaru 2013 Impreza WRX Bedienungsanleitung
Subaru
Subaru Legacy AWD Bedienungsanleitung
Subaru
Subaru Impreza 2004 Bedienungsanleitung
Subaru
Subaru Legacy 2011 Bedienungsanleitung
Subaru
Subaru Impreza 2018 Bedienungsanleitung
Subaru
Subaru EyeSight 2016 Bedienungsanleitung
Subaru
Subaru CROSSTREK 2017 Bedienungsanleitung
Subaru
Subaru 2011 Forester Bedienungsanleitung
Subaru
Subaru Forester 2017 Bedienungsanleitung
Subaru
Subaru Crosstrek Hybrid 2022 Bedienungsanleitung
Subaru
Subaru 2004 LEGACY Bedienungsanleitung
Subaru
Subaru 2001 Forester Bedienungsanleitung
Subaru
Subaru 2013 BRZ Bedienungsanleitung
Subaru
Subaru BRZ 2016 Bedienungsanleitung
