Subject Link RPT-2010G-2F Bedienungsanleitung

Industrial Managed Ethernet Switch Hardware User Manual

RPT-2010G-2F(-T)-X2

Quick Installation Guide

Version 1.0.0

Subject Link Inc

9F-1, No. 77, Sec 4., Nangjing E. Rd, Taipei City, 10580, Taiwan, R.O.C.

Tel: +886 935 672 398

Mail: sales@sbjlink.com

Web: www.sbjlink.com

Contents 
 
 
Overview.....................................................................................................................................................1 
Package Check List..............................................................................................................................1 
Hardware Description.............................................................................................................................2 
Front Panel Instruction .....................................................................................................................2 
Dimensions............................................................................................................................................2 
Top View ................................................................................................................................................3 
LED Instruction.....................................................................................................................................3 
Reset Button.........................................................................................................................................4 
USB Port.................................................................................................................................................4 
Earth Grounding..................................................................................................................................4 
Hardware Installation .............................................................................................................................5 
SFP Cabling............................................................................................................................................5 
Wiring Power Inputs ..........................................................................................................................7 
Wiring Fault Alarm..............................................................................................................................7 
Wiring Digital Inputs ..........................................................................................................................7 
Double-Secure Power Input Fault Alarm ....................................................................................8 
Mounting...............................................................................................................................................9 
Installation Steps...............................................................................................................................10 
Specification.............................................................................................................................................11 
 

Overview

This user manual is for "RPT-2010G-2F" and "RPT-2010G-2F-T", where "-T" refers to the

extended temperature (-40°C ~ 75°C (-40°F ~ 167°F)) that is supported. This is an industrial managed

gigabit Ethernet switch with the following hardware features:

Interface

▪MDI/MDI-X function supported on all copper ports

▪Embedded 8x Gigabit Ethernet ports + 2x 1000 SFP Slot

▪Store-and-forward switching architecture

Switch Properties

▪Up to 16K MAC Address Table supported

▪Up to 9216bytes Jumbo Frame supported

▪Up to 12Mbits Packet Buffer supported

Power Input

▪Redundant 12-48VDC power

Temperature

▪Standard operating temperature: -10°C ~ 60°C (14°F ~ 140°F)

▪Extended operating temperature: -40°C ~ 75°C (-40°F ~ 167°F)

▪Storage temperature: -40°C ~ 85°C (-40°F ~ 185°F)

Mechanical Construction

▪Class IP30 protection

▪DIN-Rail Mounting, Optional Wall Mounting

PACKAGE CHECK LIST

The "RPT-2010G-2F (-T)" is shipped with the following items. Ensure that all the items are in

the box. If any item is missing or damaged, contact us for assistance.

▪RPT-2010G-2F/RPT-2010G-2F-T switch x 1

▪Protective caps for 8x copper ports, 2x SFP slots, 1x USB port, and 1x RJ45 console port

▪Wall mount brackets and screws (Optional)

▪RJ45 to RS232 Serial console cable x 1

Hardware Description

FRONT PANEL INSTRUCTION

The following picture is the front panel for "RPT-2010G-2F(-T)".

DIMENSIONS

WxHxD: 72x145x118 mm

TOP VIEW

This is the top view of the RPT-2010G-2F(-T)

containing the ground, power inputs, and

fault alarm relay.

LED INSTRUCTION

System LEDs

LED

Color

Status

Description

PWR1

Green

Power is supplied on the power input 1.

Off

Power is not supplied on the power input 1.

PWR2

Green

Power is supplied on the power input 2.

Off

Power is not supplied on the power input 2.

Fault

Green

The system boots up and in normal operation.

Off

The system is powered off or during booting.

Red

The configured event of failure is triggered.

Green

This device has the Ring Master.

Off

The Ring Master is not on the device.

Ring

Green

The Ring protocol is enabled and works normally.

Flashing

The Ring protocol is enabled, but works abnormally.

Off

The Ring protocol is disabled.

Interface Status LEDs

LED

Color

Status

Description

SFP Slot

P9 to P10

(1000M)

Green

The 1000Mbps link of the fiber port is active.

Flashing

Data is transmitted on the fiber port at 1000Mbps.

Off

The 1000Mbps link of the fiber port is inactive.

LAN Port

P1 to P8

(1000M)

Green

The 1000Mbps link of the port is active.

Flashing

Data is transmitted on the port at 1000Mbps.

Off

The 1000Mbps link of the port is inactive.

LAN Port

P1 to P8

(10/100M)

Amber

The 10/100Mbps link of the port is active.

Flashing

Data is transmitted on the port at 10/100Mbps.

Off

The 10/100Mbps link of the port is inactive.

RESET BUTTON

A multifunctional reset button is provided. Use a pointed object such as toothpick or paper clip

(straightened) to press the reset button.

Continuous

Seconds

Action

Save the running configuration to the USB device named "running-config".

Reboot the system.

More than 7

Reset the system to factory default and reboot it.

USB PORT

A USB port is available on the switch that is located between the Console port

and Reset button. This USB port provides the following features:

▪Backup/Restore Configurations

▪Auto-Load configuration from USB

▪Auto-Backup configuration to USB

▪Save system logs to USB

EARTH GROUNDING

The earth grounding and cautious wire routing are helpful to suppress the effects of noise from

electromagnetic interference (EMI). The switch has to be installed on a well-grounded surface, for

instance, a metal panel.

The location of earth ground screw is usually near the location of power

inputs, for example:

▪Top side for most of din-rail models

▪Rear side for most of rack-mount models

▪Front side for most of M12 models

Note: Connect the ground from the ground screw to the surface of ground before wiring the

power inputs.

Hardware Installation

SFP CABLING

There are 2x 1000 SFP Slot SFP Slots on the "RPT-2010G-2F(-T)" switch. The 100Tx SFP module

is not supported in this model. The following table is the SFP modules that is recommend to the users.

Part No.

SFP Type

Vender

Fiber Mode

Distance

125Mbps (Fast Ethernet/ 100Base-X SFP)

AXFE-1314-0521

SFP-100FX

AXCEN

Multi-Mode

2km

AXFE-1314-0531

SFP-100LX-10

AXCEN

Single-Mode

10km

LS38-A3S-TI-N

155Mbps

APAC

Single-Mode

30km

125Mbps (100Base-BX, Single Fiber Bi-Directional SFP)

AXFT-1724-0531

SFP-100BX10-D5

AXCEN

Single-Mode

10km

AXFT-1624-0531

SFP-100BX10-U5

AXCEN

Single-Mode

10km

1.25Gbps (Gigabit Ethernet/ 1000Base-X/ Fiber Channel SFP)

AXGE-5854-0511

SFP-1000SX

AXCEN

Multi-Mode

550m

AXGE-1354-0531

SFP-1000LX

AXCEN

Single-Mode

10km

AXGE-1354-0533

SFP-1000LX-IT

AXCEN

Single-Mode

10km

AXGD-1354-0531

SFP-1000LX-DD

AXCEN

Single-Mode

10km

1.25Gbps (1000Base-BX, Single Fiber Bi-Directional SFP)

AXGE-3454-0531

SFP-1000BX10-D4

AXCEN

Single-Mode

10km

AXGE-1254-0531

SFP-1000BX10-U4

AXCEN

Single-Mode

10km

10Gbps SFP+ (For 10G Model Only)

LM28-H3S-TC-N-EA

10Gbps

APAC

Multi-Mode

300m

LE38-H3S-TIN

10Gbps

APAC

Single-Mode

10km

AXXE-3386-0533

SFP+-10G-LR-IT

AXCEN

Single-Mode

10km

EOLP-8596-02-I

10Gbps

Eoptolink

Multi-Mode

300m

Copper SFP

AXFE-R1S4-05H1

SFP-100TX-LOS

AXCEN

AXGT-R154-05J1

SFP-1000T-LOS-AN

AXCEN

AXGT-R154-05I1

SFP-1000T-LOS

AXCEN

SFP-T1A

Auto-negotiation on and 100 Mbps full

duplex only

APAC

SFP-T1B

Auto-negotiation off and force on 100 Mbps

full duplex

APAC

ASFPT-T1

SFP-1000BASE-T

APAC

10G Copper SFP+ (Only tested under room temperature / For 10G Model Only)

ASFPT-TNBT-I

1G/10Gbps

APAC

6C-SFP-10G-T

1G/10Gbps

6COM

Insert SFP Module

1. Insert the SFP module. A triangle is available on the switch and SFP module.

2. Push the SFP module down.

Remove SFP Module

1. Press and remove the SFP cable.

2. Open the SFP module and remove it.

WIRING POWER INPUTS

1. Insert the positive and negative wires into the PWR1 (+,-) and

PWR2 (+,-) on the 4-contact terminal block connector.

2. Tighten the screws to prevent the wires from loosening.

WIRING FAULT ALARM

1. Insert the wires into the left two contacts of the 4-contact

terminal block (Fault Alarm Relay).

2. Tighten the screws to prevent the wires from loosening.

3. The relay will detect the power and link failure.

4. Users can connect the relay to an alarm and buzzer so that

when the relay forms an open circuit, the users will be notified.

WIRING DIGITAL INPUTS

1. Insert the positive and negative wires into the right two

contacts (+,-) of the 4-contact terminal block (DI).

2. Tighten the screws to prevent the wires from loosening.

3. The system will detect the voltage go through the DI.

▪+13 to +30V for state "1"

▪-30 to +3V for state "0"

▪Max. input current: 8mA

DOUBLE-SECURE POWER INPUT FAULT ALARM

The power inputs are designed as a "common

negative", which implies that the negative

input is connected, but "double-secure" is

supported to prevent the unnotified failure of

power from one of the negative inputs. Should

one of the negative power inputs fail, the

system will detect the failure. NOTE: the

system will trigger an event occurrence only if

the user has set the fault alarm or event log

for power.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Subject Link Schalten Handbücher

Subject Link

Subject Link RPT-2012G/GP-4F-T Gebrauchsanweisung

Subject Link

Subject Link RPT-2018G-2F-X4 Series Bedienungsanleitung

Subject Link

Subject Link RPT-1008G-X2 Gebrauchsanweisung

Subject Link

Subject Link RPT-2012/P-4F-T-1 Series Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung