Subzero PRO Refrigeration Series Leitfaden

ICB REVISED 5/2019

DESIGN GUIDE

NEW PRO REFRIGERATION

Features and specications are subject to change at any

time without notice.

Throughout this guide, dimensions may vary by ± 3 mm.

TABLE OF CONTENTS

3PRO REFRIGERATION

4OVERALL DIMENSIONS

6OPENING DIMENSIONS

8ELECTRICAL

8PLUMBING

9STANDARD HANDLES

11 SUB-ZERO WARRANTY

subzero.com | 3

PRO REFRIGERATION

PRO MODELS

PRO Refrigeration

Freshness nds unmistakable expression with Sub-Zero

PRO Refrigeration. A monument to food preservation—

equal parts sculpted metal design statement and culinary

secret weapon. Its vast interior, like its bold exterior, is

crafted of stainless steel. Available in 914 mm and 1219 mm

widths, with a glass or solid door, and may be either built in

or freestanding.

ICBPRO3650

ICBPRO3650G

ICBPRO4850

ICBPRO4850G

4 | English

SPECIFICATIONS

2134

102 mm

HEIGHT DIMENSIONS ± 13 mm

657 mm

775

1070

767 mm

949

660

60 mm

914 mm

606

660

Overall Dimensions

914 mm MODEL

Model ICBPRO3650 / ICBPRO3650G SPECIFICATIONS

INTERIOR CAPACITY L L

ICBPRO3650 521 122

ICBPRO3650G 521 122

SHIPPING WEIGHT KG

ICBPRO3650 286

ICBPRO3650G 295

subzero.com | 5

SPECIFICATIONS

2134

102 mm

HEIGHT DIMENSIONS ± 13 mm

657 mm

775

1070

767 mm

368

606

781

533

60 mm

1219 mm

606

660

Overall Dimensions

1219 mm MODEL

SPECIFICATIONS

INTERIOR CAPACITY L L

ICBPRO4850 530 331

ICBPRO4850G 530 331

SHIPPING WEIGHT KG

ICBPRO4850 390

ICBPRO4850G 399

Model ICBPRO4850 / ICBPRO4850G

6 | English

SPECIFICATIONS

Opening Dimensions

STANDARD | FLUSH INSTALLATION

NOTE: 89 mm finished retur

ns will be visible and should be finished to match cabinetry.

OPENING

HEIGHT

OPENING

DEPTH

FRONT VIEW

SIDE

VIEW

TOP VIEW

OPENING WIDTH

19 mm

TYPICAL

FRAMED

CABINETRY

FILLER

89 mm

FINISHED

RETURN

FRAMELESS

CABINETRY

19 mm

TYPICAL

89 mm

FINISHED

RETURN

STANDARD OPENING WH D

914 mm Model 902 mm 2127 mm 610 mm

1219 mm Model 1206 mm 2127 mm 610 mm

For standard installations, the face frame will extend 51 mm

beyond cabinetry.

FLUSH OPENING W H D

914 mm Model 914 mm 2137 mm 660 mm

1219 mm Model 1219 mm 2137 mm 660 mm

For ush installations, the face frame will be ush with sur-

rounding cabinetry.

subzero.com | 7

SPECIFICATIONS

Opening Dimensions

DUAL STANDARD | FLUSH INSTALLATION

NOTE: 89 mm finished retur

ns will be visible and should be finished to match cabinetry.

OPENING

HEIGHT

OPENING

DEPTH

FRONT VIEW

SIDE

VIEW

TOP VIEW

OPENING WIDTH

19 mm

TYPICAL

FRAMED

CABINETRY

FILLER

89 mm

FINISHED

RETURN

FRAMELESS

CABINETRY

19 mm

TYPICAL

89 mm

FINISHED

RETURN

DUAL STANDARD OPENING WH D

Two 914 mm Models 1816 mm 2127 mm 610 mm

For standard installations, the face frame will extend 51 mm

beyond cabinetry. A dual installation kit is required for this

installation.

DUAL FLUSH OPENING W H D

Two 914 mm Models 1829 mm 2137 mm 660 mm

For ush installations, the face frame will be ush with sur-

rounding cabinetry. A dual installation kit is required for this

installation.

8 | English

SPECIFICATIONS

Electrical Requirements

Installation must comply with all applicable electrical codes

and be properly grounded (earthed).

International models from the factory designed without a

transformer require a 220-240 V AC, 50/60 Hz electrical

supply, fused at the correct rating for the unit. If required

by local or national codes, the power cord can be easily

replaced using the power inlet device.

Locate the electrical supply within the shaded area shown

in the illustration below. A separate circuit servicing only

this appliance is required. A ground fault circuit interrupter

(GFCI) is not recommended and may cause interruption of

operation.

ELECTRICAL REQUIREMENTS

Power Supply 220-240 V AC, 50/60 Hz

Circuit Breaker 10 amp

Receptacle grounding-type (earthed)

Plumbing Requirements

Installation must comply with all applicable plumbing codes.

Locate the water supply line within the shaded area shown

in the illustration below. Connect the water supply line to the

house supply with an easily accessible shut-off valve. Do

not use self-piercing valves. The water supply line must not

interfere with the installation of the anti-tip bracket.

A reverse osmosis system can be used provided there

is constant water pressure of 2.4–8.3 bar supplied to the

unit at all times. A copper line is not recommended for this

application.

PLUMBING REQUIREMENTS

Water Supply 6.4 mm OD copper line,

braided stainless steel, or PEX tubing

Water Pressure 2.4–8.3 bar

Excess Water Line for Connection .9 m

1918 mm

FROM FLOOR

178

mm E

152

RIGHT SIDE

OF OPENING

Electrical supply location

76 mm

152

132

RIGHT SIDE

OF OPENING

AREA EXTENDS 13 mm

FORWARD ON FLOOR

Water supply location

subzero.com | 9

SPECIFICATIONS

Standard Handles

Optional stainless steel pro handles are available through

an authorized Sub-Zero dealer. Refer to the chart below for

standard handle lengths for PRO models.

HANDLE LENGTH 914 mm MODEL 1219 mm MODEL

Door 703 mm 703 mm

Refrigerator Drawer 665 mm 506 mm

Freezer Drawer 665 mm 294 mm

10 | English

Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &

Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.