Sugon TC6600 Bedienungsanleitung

TC6600

User's Manual

DAWNING INFORMATION INDUSTRY CO.,LTD.

Statement

This manual is intended to help users to use the server product of Sugon correctly (hereinafter referred to as "This

Product").Please read all accompanying materials carefully before you install and use this product for the first time,

especially for the considerations mentioned in this manual. This will help you to better use this product safely.

Please keep this manual properly for the future reference.

The description in this manual does not represent any description of the specification and software/hardware

configuration for this product. For the actual specification and configuration of this product, please refer to relevant

agreements, packing lists and description files of product specification and configuration, or consult with distributor

of this product.

If you fail to install, use or keep this product correctly and in accordance with the instructions and requirements of

this manual, or enable the technical personnel without the authorization of Sugon to repair and change this

product,Sugon will not be liable for any damage resulting therefrom.

The photos, graphs, charts and illustrations in this manual are provided for the purpose of interpretation and

illustration only, which may be slightly different from the actual product. Furthermore, the specification and

configuration of this product may vary according to demands. Hence, it may be different from the content of this

manual. The actual product shall prevail.

The non-Sugon website information mentioned in this manual isprovided for the convenience. Such website

information is not a part of product materials of Sugon or a part of services provided by Sugon. Hence, Sugon will

not guarantee the accuracy and availability of such website information. Users shall assume the risk of using such

website by themselves.

This manual is not used to indicate that Sugon guarantees its products and services expressly or implicitly,

including (but not limited to) the guarantee of the applicability, safety, merchantability and fitness for particular

purposes for the product recommended in this manual. The guarantee and warranty commitment for this product

and related services shall be performed in accordance with applicable agreements or the terms and conditions of

the standard warranty service for this product. Sugon shall not be liable for any damage caused by your use of or

failure to use this product to the fullest extent permitted by laws and regulations (including, but not limited to, the

direct or indirect personal injury, loss of business profits, service interruption, loss of business information or any

other losses).

Sugon shall not guarantee the reliability of using the accompanying software for other products, using the

non-accompanying software or other software not the proprietary software certificated and recommended by

Sugon for this product.

Sugon has collated and checked this manual carefully,but it will not guarantee no errors and omissions are

contained in this manual. In order to provide better services, Sugon may improve or change the product software

and hardware described in this manual and the content of this manual without prior notice. If you find any

discrepancy between this product and this manual when using this product, or you want to obtain the latest

information or have any question and idea, welcome to call 400-810-0466 or access the service website of Sugon

www.sugon.comfor

consultation.

iii

Trademark and Copyright

"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,

LTD.

"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,

LTD. "DAWNING INFORMATION INDUSTRY CO., LTD" is hereinafter referred to as "Sugon".

"Intel" and "Xeon" icons are the registered trademarks of Intel.

“Microsoft”, “Windows”, “Windows Server”and “Windows Server System”are the trademarks or registered

trademarks of Microsoft.

Other products, logos and trademarks which are mentioned in this manual but not listed above may also be

trademarks or registered trademarks of other companies, and are owned by their respective companies, other

organizations or individuals.

The accompanying software described in this user's manual is provided according to the terms and conditions of

the end user license agreement, and can only be used and reproduced in accordance with the provisions of the

end user license agreement.

This manual is protected by the copyright laws and regulations, and all or any part of this manual shall not be

reproduced, copied, deleted or compiled into the machine-readable format in any way without the prior written

authorization of Sugon, or stored in the retrieval system in any form, or transmitted over the wired or wireless

network, or translated into any text in any way.

Operating Instruction for Power Supply

Switch on power supply for servers

To switch on the power supply for servers, please press the "ON/OFF" button.

Switch off power supply for servers

1. Backup the server data.

2.Shut down the operating system in accordance with the instruction of the operating system document.

(If the operating system puts the server in standby mode automatically, skip the next step.)

3.Press the "ON/OFF" button to put the server in the standby mode. When the server activates the Wait for Power

mode, the system power LED indicator will change to red.

4.Unplug all power cords. At present, the system is in the Power-off status.

Requirement for Power Supply

This equipment shall be installed in accordance with the local or regional electrical regulations on the installation

of information technology equipment, and the installation procedure shall be completed by the recognized

electrical engineer. The equipment is designed elaborately and can operate in the installation environment that

complies with the national power supply specification. For the power supply rating of relevant options, please refer

to the product rating label or the accompanying user document of the option.

When more than one server are installed, other power distribution equipment may be needed to supply the power

for all equipment safely. Please observe the following guidelines:

Balance the server power supply load between the availableAC power supply branch circuits.

The total AC current load of the system is not allowed to exceed 80 percent of the AC current rating for the

branch circuit.

Do not use the ordinary power wiring board to connect with this equipment.

The server is powered by the separate circuit.

Requirements for Electrical Grounding

The server shall be grounded properly to make it operates normally and ensure safety. This equipment shall be

installed in accordance with the following requirements: Any regional or national/local electrical connection

procedure, such as part 1 - 7 of IEC rules 364. Furthermore, it is necessary for you to ensure that all power

distribution equipment used during the installation (such as the branch connection and socket) is of the listed or

certificated ground type equipment.

For several servers connecting to the same power supply are needed to lead a large amount of electric current

into underground, Sugon suggests the used PDU is connected to the branch circuit of buildings fixedly or

equipped with one non-detachable wire which is connected with the industrial plug. All plugs which comply with the

IEC 60309 standard shall be considered as applicable plugs. It is not suggested to use the ordinary power wiring

board to connect with this server.

Electrostatic Discharge

Electrostatic Discharge Prevention

In order to prevent from damaging the system, it is necessary to take necessary precautions when you install the

system or take out/put in the component. The static electricity discharged by fingers or other conductors may

damage the main board or other electrostatic sensitive equipment. The electrostatic damage will shorten the

expected service life of above-mentioned equipment. To prevent the electrostatic damage, attention shall be paid

to the following aspects:

The product shall be packed in the anti-static package to prevent from touching the product by hands directly

during the transportation and storage.

Before the electrostatic sensitive components are transported to the work place which is not affected by static

electricity, put them in their respective package for storage.

Take out the equipment from their package, and do not put it down, but install it into the server directly. If you

want to put down the equipment,put it back in the anti-static package. Do not put the equipment on the outer

cover ormetal surface of the server.

When the equipment is still in the anti-static package,the equipment shall contact the unpainted outer metal

surface of the server for 2 seconds at least. In this way, it can implement the electrostatic discharge of the

anti-static package and your body.

Minimize the movement. The movement will lead to the accumulation of static electricity around your body.

Hold the edge or frame of the equipment, and operate the equipment carefully.

Do not touch the welding point, pin or exposed circuit.

Do not put the equipment in the place where other people can touch and damage it.

When you touch the electrostatic sensitive components or devices, it is necessary to take appropriate grounding

measures.

You should take particular care when operating the equipment in cold weather. The heating system will reduce

indoor humidity and increase static electricity.

Grounding Method for Electrostatic Discharge Prevention

There are several grounding methods. You can use one or more of the following methods when youtake out/put in

or install the electrostatic sensitive components:

You can use the wrist strap, which is connected with the grounding work area or computer chassis by grounding

wire. The wrist strap shall be scalable flexibly, and the resistance of the grounding wire shall be 10 percent of 1

Mega ohms at least. To achieve the grounding purpose, the wrist strap shall be close to the skin tightly when you

put on it.

Use the heel strap, toe strap or boot strap in the vertical work area. Tie the belt on your feet when you stand on

the conductive floor or dissipative static floor mat.

Use the conductive field maintenance tool.

Combine with the use of dissipative static folding tool pad and portable field maintenance kit.

vii

Dangerous Warning Statement

[Warning]

This product is of the grade A product. The product may cause the radio interference in the living environment. In

this case, it may require users take practical measures to prevent the interference.

The current in the power supply, telephone and communication cable is dangerous. In order to eliminate the risk

of electric shock:

Do not connect or disconnect any cable, or install, maintain, or reconfigure this product during the lightning.

Connect all power cords to the power supply socket with the correct wiring and proper grounding.

Connect all equipment which needs to be connected to this product to the socket with the correct wiring.

Connect or disconnect the signal cable by one hand as far as possible.

Do not turn on any equipment when there is signs of fire, flood or house collapse.

Unless otherwise stated during the installation and configuration, disconnect the connected power cord, remote

communication system, network and modem before you open the outer cover of the equipment.

Statement 1:

[Note]

The power control button on the equipment and the power switch the power supply will not disconnect the current

of the supply equipment. The equipment may be also provided with more than one power cord. To enable the

equipment to be powered off completely, ensure all power cords are disconnected with the power supply.

Statement 2:

[Note]

Do not remove the outer cover of power supply or the outer cover of any component with the following label.

There is dangerous voltage, current and energy level in any component with this label. There is not any

maintainable component in these components. If you suspect some component with any problem, please contact

technical service personnel.

Statement 3:

[Danger]

In some cases, the high branch circuit load may cause the fire and electrical shock hazard. In order to prevent

such risks, ensure that the electrical requirements of the system does not exceed the protection requirements of

the branch circuit. Refer to the accompanying information of the equipment to understand the electrical

specification.

viii

Operate in the interior of power-on server.

[Warning]

When the server is powered on, the static electricity discharged into the internal components of the server may

cause the server to abort abnormally, which may cause data loss. To prevent this potential problem, please always

use the ESD wrist strap or other grounding systems when you operate inside the power-on server. The server

(some models) supports the hot plug equipment and is designed to operate safely when the server is powered on

and the outer cover is removed. Please observe the following guidelines below when you operateinside the

power-on server.

Prevent from putting on clothes with loose cuffs. Clamp the button on the cuffs of long sleeve shirt before you

operate it in the server internally. Do not wear any cuff links when you operate inside the server.

Do not let tie or scarf down into the server.

Take off all jewelries, such as bracelet, necklace, ring and loose wrist watch.

Take out items in shirt pocket (such as pen and pencil) which may fall into the server when you bend over the

server.

Prevent any metal items (such as paper clip, hair clip and screw) from falling into the server.

Statement 4:

[Note]

In order to reduce the risk of personal injury, fire or equipment damage, the AC power supply branch circuit

powered for the rack shall not be overloaded. Please consult with the electrical agency who formulates the

equipment wiring and installation requirements.

Statement 5:

[Note]

Use the adjustable UPS to prevent the server from being affected by the power fluctuation and temporary power

outage. This equipment can prevent the hardware from being damaged by the impact of surge and peak voltage,

and maintain the system in normal operation state during power failure.

Statement 6:

[Note]

When you use the cable management arm component, each cable shall be kept loose to prevent from damaging

the cable when taking out server from the rack.

Statement 7:

[Note]

To reduce the risk of electric shock or equipment damage, attention shall be paid to the following aspects:

Make sure to use the grounding plug of the power cord. The grounding plug can perform important safety

protection function.

Always plug the power cord into the nearby accessible grounding power socket.

Unplug the power cord to disconnect the power supply of the equipment.

Do not put power cord in a place where it is easy to be stepped on or squeezed by the object beside it. Special

attention shall be paid to the plug, power socket and the connection point between power line and server.

Table of Contents

Statement.............................................................................................................................ii

Trademark and Copyright....................................................................................................iii

Operating Instruction for Power Supply...............................................................................iv

Dangerous Warning Statement..........................................................................................vii

Table of Contents................................................................................................................ x

List of Figures....................................................................................................................xiii

List of Tables....................................................................................................................xvii

1Product Profile.................................................................................................................1

1.1 Product Overview ...................................................................................................1

1.2 Product Features ....................................................................................................1

1.2.1 Technical Characteristics.............................................................................................................2

1.2.2 Reliability, Availability and Maintainability....................................................................................3

1.3 Product Specification..............................................................................................5

1.3.1 Technical Specification ................................................................................................................5

1.3.2 Application Environment of Products.........................................................................................10

1.3.3 Product Power Requirement......................................................................................................10

2Product Structure and Installation.................................................................................11

2.1 Product Composition ............................................................................................11

2.1.1 Front Panel Assembly................................................................................................................11

2.1.2 Rear Panel Assembly.................................................................................................................12

2.1.3 Management and switching module..........................................................................................14

2.1.4 Power Module ............................................................................................................................15

2.1.5 Fan Module ................................................................................................................................16

2.2 Disassembly of Product Chassis and Main Components .....................................17

2.2.1 Safety Measures........................................................................................................................17

2.2.2 Installation of Carriage Rail........................................................................................................18

2.2.3 Blade Server Putaway................................................................................................................19

2.2.4 Insertion/Pull-out of Blade System Module................................................................................20

Inhaltsverzeichnis

Andere Sugon Server Handbücher

Sugon

Sugon I620-G20 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung