Summit Appliance LWM24 Bedienungsanleitung
WASHER
User Manual
Models:
SLW241W
LWM24
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULED AND OPERATING
INSTRUCTIONS
Write Model and Serial Numbers
here:
Model: _____________________
Serial No.: __________________
Summit Appliance
Division of Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
2
TABLE OF CONTENTS
SafetyPrecautions 3-4
Technical Specifications 4
Installation and Connection 5-9
Removing the Blocking Rods 5
Adjusting the Washing Machine Feet 5
Installation Clearances 6
Connecting the Water Line 6-7
Connecting the Water Discharge Hose 7-8
Connecting the Power Supply 9
ProperUsage 9-15
Turning on the Washing Machine 9
Loading the Washing Machine 9
AddingDetergent 10
Choosing the Washing Program 10-12
Choosing the Proper Setting 13-14
AdditionalSettings 14
Starting the Washing Machine 15
Changing the Washing Program and Manual Cancellation 15
Adding/Removing Laundry During the Washing Program 15
Low Standby Mode 15
Maintenance and Cleaning 16-17
Cleaning the Dispenser Tray 16
Cleaning the Water Supply Hose, Detergent Dispenser, and Door Gasket
17
Cleaning the Pump Filter 17
Troubleshooting 18-20
Disposal 21
Program Duration and Rate Table 22
LimitedWarranty 24
3
SAFETY PRECAUTIONS
Your safety and the safety of others is very important.
This manual contains imporatant information on the installation, use, and care of your appliance.
Read the instructions for use carefully before using the washing machine to prevent injury and
property damage. Please, do not use the washing machine without reading and understanding
these instructions or use first.
NOTE: These instructions for use are supplied with different types or models of washing
machines. Therefore, they may include descriptions of settings or equipment that are not
available in your washing machine.
Failure to observe the instructions for use or inappropriate use of the washing
machine may result in damage to the laundry or the appliance, or injury to the
user. Keep the instruction manual handy, near the washing machine.
Your washing machine is intended solely for household use. If the washing machine is used
for professional, for-profit purpose or purpose exceeding normal use in a household, or if the
washing machine is used by a person who is not a consumer, the warranty period shall be
equal to the shortest warranty period required by relevant legislation.
Connection to water and power supply has to be executed by an adequately trained
technician or expert.
Any repair and maintenance pertaining to safety or performance should be done by trained
experts.
To avoid danger, a damaged power cord may only be replaced by the manufacturer, a
service technician, or an authorized person.
Before connecting the washing machine to the power mains, wait for at least 2 hours until it
reaches room temperature.
In case of a defect, only use approved spare parts by authorized manufacturers.
In case of incorrect washing machine connection, incorrect use, or servicing by an
unauthorized person, the user shall bear the cost of any damage as such damage shall not
be covered by warranty.
The washing machine may not be connected to the power mains using an extension cord.
Do not connect the washing machine to power mains using an external switching device
such as a program timer, or connect it to power mains that is regularly switched on and off by
the power supply provider.
Do not connect the washing machine to an electrical outlet intended for an electric shaver or
hair dryer.
Certain internal parts are intentionally not grounded and may present a risk of electric shock
only during servicing. Service Personnel - Do not contact the following parts while the
appliance is energized: Motor, Pump and Control unit.
Do not install the washing machine in a room where the temperature can drop to below 41°F
(5°C), as washing machine parts may be damaged in case of water freezing.
Place the washing machine on a level and stable solid (concrete) base.
If the washing machine is placed on an elevated stable base, the washing machine has to be
additionally secured against tipping.
Before the first use of the washing machine, remove the blocking rods, as switching on a
blocked washing machine can result in serious damage. Warranty shall be void in cases of
such damage.
To connect the washing machine to water supply, make sure to use the supplied water
supply hose and gaskets.
Water pressure has to be between 0.05 and 0.8 MPa (0.5 – 8 bar).
Always use a new water supply hose to connect the washing machine to water supply; do not
reuse an old water supply hose.
4
Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances
are still dangerous, even if they will “just sit in the garage a few days.”
Before discarding your old refrigerator:
o Take off the doors
o Leave the shelves in place so that children may not easily climb inside
-SAVE THESE INSTRUCTIONS-
TECHNICAL INFORMATION
Power Supply 208-240V, 60Hz
Rated Current 15A
Maximum load 19.8lbs
Spin Speed 1,400 rpm
Water Pressure 0.05-0.8MPa (7.25 -115psi)
Maximum Power 2,300 W
Width 23 ½”
Height 33 ½”
Depth with door closed 25 ½”
Depth with door open 44 ½”
5
INSTALLATION AND CONNECTION
Remove the exterior and interior packaging before using your appliance.
Place the washing machine on a clean, dry concrete floor strong enough to support the
machine.
Let the washing machine stand for at least two hours before first using the appliance.
NOTE: Before using your appliance for the first time, the transport rods must be removed. A
blocked washing machine may be damaged when it is switched on for the first time.
Warranty should be void in cases of such damage.
Removing the Blocking Rods
1. Move the housing and remove the screws on the back of
the washing machine. Remove the two angular
pieces.
2. Slide the angular pieces onto the groove in the
blocking rod. Before doing so, rotate the right
angular piece to the opposite side.
3. Use the angular pieces to rotate the blocking
rods by 90
°
and pull them out.
4. Cover the two holes, through which the blocking rods were
inserted, with plastic plugs. Redo the screws that were
removed in Step 1.
Adjusting the Washing Machine Feet
Use a water scale and a No.32 wrench to adjust the feet and a No. 17 wrench to adjust the nut.
1. Rotate the adjustable feet to change their height and
level the washing machine.
2. Firmly tighten the jam nuts, using a No. 17 wrench, by
turning them up, toward the bottom of the washing
machine.
NOTE: Incorrect leveling of the washing machine may cause
vibrations, the appliance to slide across the room, or
the washing process may be louder than normal.
Incorrect leveling of the machine is not subject to
warranty.
6
Installation Clearances
The washing machine should NOT touch a wall or any adjacent furniture. For optimum operation,
we recommend making sure the clearances from the walls are as indicated in the figures below.
Safe and correct appliance operation cannot be ensured if the minimum required clearances are
not observed.
Connecting the Water Line
Attach one end of the water line hose to the back of the washing machine, and attach the other
end to the water tap. Screw the line all the way onto the thread.
If your model has connections for both hot and cold water, then connect one hose to the cold
water supply (blue wing nut or blue mark on the hose) and the other one to the hot water
supply (red wing nut or red mark on the hose), as indicated on the back of the washing
machine. Connections are labelled with letters C and H (C = cold, H = hot). HOT water
(mixture of hot and cold water) is only added for programs at WARM or higher.
If your washing machine features a hot and cold water connection, but only one water
temperature is desired for use, do not install the water hose. Close the hot/cold water
connection on the back of the washing machine with the supplied cap.
2" (50 mm)
7
For normal washing machine operation, the water main pressure should be between 0.05
and 0.8 MPa (7.25 and 116psi). Minimum dynamic water pressure can be determined by
measuring the water flow. In 15 seconds, 0.8 gal (3 liters) of water should flow from a fully
opened tap.
Firmly tighten the water supply by hand. Check the seal after connecting the hose to ensure
there are no leaks.
NOTE: DO NOT use pliers or similar tools when connecting the hose, as this could damage the
nut and thread.
Connecting the Water Discharge Hose
The discharge hose must be attached and fixed to the pin on the back of the washing machine,
as shown below:
8
Feed the water discharge hose into a wash basin or bathtub. The hose can also be directly
connected to a drain with a discharge hose with a minimum diameter or 1 ½” (4cm).
The vertical distance from the floor to the end of the discharge hose may be no more than
39” (100cm) and no less than 23 ½” (60cm). It can be attached in any of the three ways
shown below:
(A) The end of the discharge hose may be placed over a wash basin or a bathtub. Use a
string fed through the opening in the elbow support to attach the hose and prevent it from
slipping on the floor.
(B) The discharge hose may also be attached directly to the wash basin drain.
(C) The discharge hose can also be attached to a wall drain with a trap. Such a trap should
be properly installed to allow cleaning.
9
Connecting the Power Supply
Before connecting the washing machine to the power supply, wait for a least two hours until
the appliance reaches room temperature.
Connect the washing machine to a grounded power outlet, which should be freely accessible
after installation.
DO NOT connect the washing machine using an extension cord.
A damaged power cord may only be replaced by an authorized repair person.
NOTE: Use over-voltage protection to protect the appliance in case of a lightning strike.
PROPER USAGE
NOTE: Before using the washing machine for the first time, unplug the machine, clean the
washing drum with a soft cloth and water, or use the Cotton EXTRA HOT washing program while
the washer is empty.
Turning on the Washing Machine
1. Connect the washing machine to both the power supply and the water supply.
2. Connect the drain hose.
3. Press the ON/OFF/RESET butting to switch the machine on.
Loading the Washing Machine
Open the washing machine door by pulling the handle toward you. Insert the laundry into the
drum, and close the washing machine door.
10
Adding Detergent
Both liquid and powdered detergent can be used in your washing machine.
A separator/divider tab is
found in the detergent tray.
Remove the divider tab when
using powdered detergent.
Leave the divider tab in place
when using liquid detergent.
Choosing the Washing Program
Rotate the program selector knob to the left or the right, depending on the type of clothing you
are washing. The light next to the program will illuminate when that particular washing program is
selected. See the Program Table below if you are unsure which washing program is correct.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Summit Appliance Waschmaschine Handbücher
