Summit Professional FF1532X Bedienungsanleitung

OUTDOOR & INDOOR FROST-FREE

REFRIGERATORS and FREEZERS

MODEL NOS.

Refrigerators: ALR15B / FF1532B / FF1532X /

FF1532XCSS / SPR316OS

Freezers: SCFF1533B

INSTRUCTION MANUAL

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.

Felix Storch, Inc.

An ISO 9001:2015 registered company

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

Write Serial Number (on lower left corner of

inside cabinet) here:

Serial No.: _______________________

TABLE OF CONTENTS

Appliance Safety

Important Safeguards

3-4

Location of Parts

Installation Instructions

6-8

Before Using Your Appliance

Installation of Your Appliance

Electrical Connection

6-7

Extension Cord

Reversing the Door Swing of Your Appliance

Installing the Stainless Steel Handle

Operating Your Appliance

8-11

Control Panel forRefrigerators

8-9

Control Panel for Freezers

9-10

Sabbath Mode

Temperature Memory Function

Defrosting

10-11

Using the Freezer SCFF1533B

Temperature Alarm / Door Alarm

Door Lock

Shelves

Care and Maintenance

Cleaning Your Appliance

Power Failure

Vacation Time

Moving Your Appliance

Energy Saving Tips

Troubleshooting

13-14

Limited Warranty

APPLIANCE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that

can kill or injure you and others. All safety messages will follow the Safety

Alert Symbol and either the word DANGER or WARNING.

DANGER means that failure to heed this safety

statement may result in severe personal injury or

death.

WARNING means that failure to heed this safety

statement may result in extensive product

damage, serious personal injury, or death.

All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,

and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as

described in this manual, so read the manual carefully. To reduce the risk of fire,

electrical shock or injury when using the appliance, follow basic precautions,

including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do

not use an extension cord.

Replace all panels before operating.

It is recommended that a separate circuit serving only your appliance be provided. Use receptacles

that cannot be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.

And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other appliance. The fumes can create a fire hazard or explosion.

Do not connect or disconnect the electric plug when your hands are wet.

Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in

electrical shock or death.

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in

this manual. All other servicing should be referred to a qualified technician.

This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is

environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the

greenhouse effect. Care must be taken during transportation and setting up of the appliance that no

parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.

In the event of any damage:

- Avoid open flames and anything that creates a spark,

- Disconnect from the power supply,

- Air the room in which the appliance is located for several minutes and

- Contact the Service Department for advice.

The more coolant there is in an appliance, the larger the room it should be installed in. In the event of

a leakage, if the appliance is in a small room, there is the danger of combustible gases building up.

For every ounce of coolant, at least 325 cubic feet of room space is required. The amount of coolant in

the appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an

Authorized Service Person to carry out servicing or repairs to this appliance.

Take serious care when handling, moving and using the appliance to avoid either damaging the

refrigerant tubing or increasing the risk of a leak.

Replacing component parts and servicing shall be done by factory authorized service personnel, so as

to minimize the risk of possible ignition due to incorrect parts or improper service.

FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install appliance. Failure to do so can result in back or other

injury.

To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.

Choose a well-ventilated area with temperatures above 44°F (7°C) and below 90°F (32°C).

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical, water and drain connections in accordance with

state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in

accordance with the National Electrical Code and local codes and ordinances, is required.

Do not kink or pinch the power supply cord of the appliance.

The size of the fuse (or circuit breaker) should be 15 amperes.

It is important that the appliance be leveled in order to work properly. You may need to make several

adjustments to level it.

All installations must be in accordance with local plumbing code requirements.

Make certain that the pipes are not pinched, kinked or damaged during installation.

Check for leaks after connection.

Never allow children to operate, play with or crawl inside the appliance.

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage

or discolor the interior.

Use this appliance only for its intended purpose as described in this Instruction Manual.

Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily

small. Be careful closing the door when children are in the area.

Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are

still dangerous, even if they will “just sit for a few days”.

Before discarding your old refrigerator:

Take off the doors

Leave the shelves in place so that children may not easily climb inside.

- SAVE THESE INSTRUCTIONS -

LOCATION OF PARTS

MODEL SPR316OS –OUTDOOR REFRIGERATOR

MODELS ALR15B / FF1532B / FF1532X / FF1532XCSS –FROST-FREE REFRIGERATORS

Digital Control Panel

LED Light

Shelves (3)

Door Racks

Kick-Plate

Adjustable Legs Security Lock

Stainless Steel Handle

Door

MODEL SCFF1533B –FROST-FREE FREEZER

Adjustable Legs

Kick-Plate

Shelves (3)

LED Light

Security Lock

Stainless Steel Handle

Door

Digital Control Panel

NOTE: Models designated for outdoor use (find “OS” in suffix of model

number) have a reinforced exterior and heavy-duty cord to help

withstand the elements.

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during

transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door, if it is not already attached. (See page 8.)

INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in or recessed or free standing installation for indoor use for models

ALR15B, FF1532B, FF1532X, FF1532XCSS and SCFF1533B, and outdoor use for SPR316OS.

CAUTION: This appliance is not designed for the storage of medicine or other medical products.

Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level the

unit, adjust the front leveling legs.

For free standing installation, 5”(127mm) of space between the back and sides of the unit, and 4”

(102mm) at the top, are suggested, which allows the proper air circulation to cool the compressor and

condenser. Even for built-in installation, it is a must to keep ¼” (6.35mm) space on each side and at

the top and 2” (51mm) at the rear. Take care that the air vent at the front of the appliance is never

covered or blocked in any way.

NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating

source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Don’t install in a location where the temperature will fall below 44°F (7°C). For best

performance, do not install the appliance behind a cabinet door or block the base grille.

Avoid locating the unit in moist areas.

Plug the appliance into an exclusive, properly grounded wall outlet.

ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped

with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of

electrical shock.

Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For

personal safety, this appliance must be properly grounded. Any questions concerning power and/or

grounding should be directed toward a certified electrician or an authorized service center.

This appliance requires a standard 115/120 Volt AC ~60Hz three-prong grounded electrical outlet. Have

the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet.

To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or

dangling.

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by a qualified electrician or an authorized service center.

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating

that matches the rating label on the appliance. This provides the best performance and also prevents

overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the

appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the

receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not

use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely

necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding

type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

REVERSING THE DOOR SWING OF YOUR APPLIANCE

This unit has the capability of the door opening from either the left or right side. The unit is delivered to

you with the door opening from the left side. Should you desire to reverse the opening direction, please

follow the reversal instructions shown below.

NOTE: All parts removed must be saved to allow the door swing to be reversed.

1. Remove the bottom hinge (2) by unscrewing the four lock screws (1).Be careful to hold the door firmly

after removing the screws. (Fig. 1)

2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to

avoid the risk of damage. Then remove the right top hinge (7). (Figs. 2 & 3)

3. Unscrew and transfer pins (4) and (3) of the hinge plate to the opposite side. (Fig. 1)

4. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right

hand side.

5. Screw the alternative left top hinge (8), included in the fittings, on the left hand side of cabinet. (Fig. 3)

6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left

designated position and tighten it after the door is leveled. (Fig. 1)

7. Remove the handle from the left side of the door and install it on the right side. (See next section.)

INSTALLING THE STAINLESS STEEL HANDLE

This appliance includes a stainless steel handle that is not required to

operate the unit. To install the handle, follow the instructions below:

1. Use a screwdriver to remove the screws on the side of door

where the handle is to be installed.

2. Align the handle with the screws removed in step # 1. Tighten the

screws using a Phillips head screwdriver until the handle is both

flush and secured tightly against the door side. (DO NOT over-

tighten as this will cause damage to the stainless steel door

surface.)

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 44º and

90ºF (7º to 32ºC). If the ambient temperature is above or below the recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extremely cold or hot

conditions may cause interior temperatures to fluctuate. The operating temperature range may not be

reached.

CONTROL PANEL for REFRIGERATORS

ON/OFF Power

To turn the appliance off, press and hold the key for 5 seconds until the temperature display

goes off. To turn the appliance on, press and hold the key for 1 second until the temperature

display lights up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

LIGHT

To control the inner light.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.

Handle

Door

Screw

Setting the Temperature Control

You can set the temperature by touching the UP and DOWN symbols. When you push either of

the two buttons for the first time, the LED readout will show the original temperature set

previously. (The temperature preset at the factory is 38°F, or 3°C.)

The temperature you are setting will increase by one degree each time you touch the UP

symbol, and will decrease by one degree each time you touch the DOWN symbol.

The range of the temperature control is from 36°F to 43°F.

To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature

will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit

will reappear in the display window.

Interior Light

The interior light makes it easy to view your items. Touching the LIGHT symbol toggles between

2 modes of operation for the internal lights: functional (default) mode and showcase mode. If

you are in functional (default) mode, the lights will turn on only when the door is open. If you are

in showcase mode, the lights will be on whether or not the door is open.

CONTROL PANEL for FREEZERS

ON/OFF Power

To turn the appliance off, press and hold the key for 5 seconds until the temperature display

goes off. To turn the appliance on, press and hold the key for 1 second until the temperature

display lights up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

SuperFreeze

SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and

will make the compressor operate continuously. It is not necessary to adjust the thermostat setting

when using this function. When the function is selected, the SuperFreeze indicator (dot at the

bottom right of the display) will be ON. The function can be canceled by pressing the key again and

the indicator will turn OFF. SuperFreeze will turn off automatically after 8 hours.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

ºF/ºCSelector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature

from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the SUPERFREEZE key

for 5 seconds.

Setting the Temperature Control

You can set the temperature by pressing the UP and DOWN keys. When you press either of the

two keys for the first time, the LED readout will show the original temperature set previously.

(The temperature preset at the factory is 0°F, or -18°C.)

The temperature you are setting will increase by one degree each time you press the UP key,

and will decrease by one degree each time you press the DOWN key.

The range of the temperature control is from -11°F to 11°F.

To view the set temperature at any time, press the UP or DOWN key. The set temperature will

flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit will

reappear in the display window.

InteriorLight

The unit is equipped with an interior LED light which will be turned ON when the door is open.

SABBATH MODE

Sabbath mode is available for the observance of certain religious holidays. This mode turns off the

displays, interior light and audible alarms and prevents them from turning on again. Normal cooling

operations will still take place.

To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds for

the refrigerators, or press the POWER and SUPERFREEZE keys at the same time for at least 5 seconds

for the freezers.The indicator light (dot at the bottom right of the display) will flash four times and confirm

that the Sabbath mode is ON.

Sabbath mode can be canceled by repeating the above process. The Sabbath Mode will automatically

turn off after 96 hours.

TEMPERATURE MEMORY FUNCTION

In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the

previous temperature settings, and when the power is recovered, the cabinet temperature will return

to the same setting temperature as before the power went off.

DEFROSTING

The unit defrosts automatically in normal operating conditions.

NOTE:

If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before

restarting the unit. If you attempt to restart before this time delay, the unit will not start.

When you use the unit for the first time or restart the unit after it has been shut off for a long time,

there could be a few degrees variance between the temperature you select and the one indicated

on the LED readout. This is normal and is due to the length of the activation time. There should

not be a problem once the unit has been running for a few hours.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Summit Professional Kühlschrank Handbücher

Summit Professional

Summit Professional FFBF181SSBI Bedienungsanleitung

Summit Professional

Summit Professional FF1074 Bedienungsanleitung

Summit Professional

Summit Professional FF1075W Bedienungsanleitung

Summit Professional

Summit Professional SPR316OS Bedienungsanleitung

Summit Professional

Summit Professional AL54 Bedienungsanleitung

Summit Professional

Summit Professional FFBF181ESBI Technisches Handbuch

Summit Professional

Summit Professional AL54SSTB Bedienungsanleitung

Summit Professional

Summit Professional FF1538B Bedienungsanleitung

Summit Professional

Summit Professional FF874 Bedienungsanleitung

Summit Professional

Summit Professional ASDS1523 Bedienungsanleitung

Summit Professional

Summit Professional FFBF245SS Bedienungsanleitung

Summit Professional

Summit Professional SP5DS2DBLK Bedienungsanleitung

Summit Professional

Summit Professional SPR315OS Bedienungsanleitung

Summit Professional

Summit Professional FFBF181SS Bedienungsanleitung

Summit Professional

Summit Professional FFBF249SS Bedienungs- und Wartungshandbuch

Summit Professional

Summit Professional FFBF240W Bedienungsanleitung

Summit Professional

Summit Professional FFRF3070B Bedienungsanleitung

Summit Professional

Summit Professional ALR15B Bedienungsanleitung

Summit Professional

Summit Professional SPFF51OS Bedienungsanleitung

Summit Professional

Summit Professional SPR628BCSS Bedienungsanleitung

Summit Professional

Summit Professional FFBF181ES Bedienungs- und Wartungshandbuch

Summit Professional

Summit Professional FFBF181ESLHD Technisches Handbuch

Summit Professional

Summit Professional FF64B Bedienungsanleitung

Summit Professional

Summit Professional FF1078B Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung