Sun Microsystems Sun Fire V20z Bedienungsanleitung

817-5258-11 1

Replacing the Sun Fire v20z or Sun Fire V40z Cable Kit

This document contains:

■“Replacing a Cable Kit in a Sun Fire V20z Server” on page 1

■“Replacing a Cable Kit in a Sun Fire V40z Server” on page 3

Replacing a Cable Kit in a Sun Fire V20z Server

Follow these steps to remove and replace the following cables (refer to FIGURE 2):

■Five-pin cable connecting the SCSI backplane to the motherboard (1).

■68-pin ribbon cable connecting the SCSI backplane to the motherboard (2).

■Flat cable connecting the SCSI backplane to the motherboard (3).

■Flat cable connecting the CD-ROM/DVD to the motherboard (5).

■Flat cable connecting the Diskette Drive to the motherboard (6).

■Flat cable connecting the operator panel board to the motherboard (7).

1. Turn off the system, including any attached peripherals.

Refer to the Sun Fire V20z and Sun Fire V40z Servers User Guide for full instructions

on powering off the server.

2. While pressing the cover latch release button with your right thumb (A), slide the

cover towards the rear of the chassis until it contacts the stop (B).

3. Lift the cover up and remove it.

FIGURE 1 Removing the Sun Fire V20z Cover

2Replacing the Sun Fire V20z or Sun Fire V40z System Cables

4. Identify the cable to be replaced.

FIGURE 2 Sun Fire V20z System Cables

The two halves of the 5-pin SCSI backplane power cable connector (1) are secured

with a hook.

The 68-pin SCSI ribbon cable (2) has no locking mechanism.

The small flat cables (3-7) are attached using two different types of zero insertion

force (ZIF) cable connectors. Because of their small size, it may be difficult to

distinguish one connector type from the other.

Refer to FIGURE 3 for the methods used to release cables from the various types of

connectors.

Caution – Use caution when removing cables as they are fragile—the small flat

flexible cables and cable connectors are extremely sensitive.

FIGURE 3 Cable Connectors

5. Check the routing of all cables for obstructions before reinstalling the cover.

1 32

4 5 6 7

817-5258-11 3

Replacing a Cable Kit in a Sun Fire V40z Server

The following procedure describes how to remove and replace the following cables:

■PCI slot mechanical retention latch (MRL) board cable

■Operator panel board cable

■SCSI signal cable

■SCSI backplane power cable

■CD-ROM/DVD-ROM diskette drive assembly cable

■Internal USB cable

1. Turn off the system, including any attached peripherals.

Refer to the Sun Fire V20z and Sun Fire V40z Servers User Guide for full instructions

on powering off the server.

2. Loosen the captive screw on the cover latch, then rotate the latch toward the

system rear to push back the cover.

3. Lift the cover up and remove it.

FIGURE 4 Removing the Sun Fire V40z Cover

4. Identify the cable to be replaced (see FIGURE 5 for the location).

Captive

screw

4Replacing the Sun Fire V20z or Sun Fire V40z System Cables

FIGURE 5 Sun Fire V40z System Cables

Refer to FIGURE 3 for the methods used to release cables from the various types of

connectors.

Caution – Use caution when removing cables because connectors and pins are very

fragile and can be damaged.

5. Check the routing of all cables for obstructions and then reinstall the cover.

Part Number: 817-5258-11

May, 2004, Revision A

licensed from Sun suppliers. Portions may be derived from Berkeley BSD systems, licensed from U. of CA. Sun, Sun Microsystems, the Sun logo, and Solaris are

trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and in other countries. All SPARC trademarks are used under license and are

trademarks or registered trademarks of SPARC International, Inc. in the U.S. and in other countries. U.S. Government Rights—Commercial use. Government users

are subject to the Sun Microsystems, Inc. standard license agreement and applicable provisions of the FAR and its supplements.

comprend la technologie relative aux polices de caractères, est protégé par un copyright et licencié par des fournisseurs de Sun. Des parties de ce produit

pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. Sun, Sun Microsystems, le logo Sun, et Solaris sont des marques de

fabrique ou des marques déposées de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Toutes les marques SPARC sont utilisées sous licence et sont

des marques de fabrique ou des marques déposées de SPARC International, Inc. aux Etats-Unis et dans d’autres pays.

MRL board

cable

Operator panel

board cable

SCSI signal cable SCSI backplane

power cable

CD/DVD/diskette

assembly cable

Internal

USB cable

Andere Handbücher für Sun Fire V20z

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sun Microsystems Server Handbücher

Sun Microsystems

Sun Microsystems SPARC T5120 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4250 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M8000 Service-Handbuch

Sun Microsystems

Sun Microsystems Netra st D130 Handbuch

Sun Microsystems

Sun Microsystems Sun Fire V215 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire T1000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems AC200 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun StorEdge Switch-8 Installationsanleitung

Sun Microsystems

Sun Microsystems Netra CT 820 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V880 Bedienungsanleitung

Sun Microsystems

Sun Microsystems StorageTek SL48 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V215 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V60x Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Enterprise 10000 Technisches Handbuch

Sun Microsystems

Sun Microsystems V250 Gebrauchs- und Pflegehandbuch

Sun Microsystems

Sun Microsystems Sun Fire V1280 Bedienungsanleitung

Sun Microsystems

Sun Microsystems SPARC Series Bedienungsanleitung

Sun Microsystems

Sun Microsystems SunSwift SPARCserver 1000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4440 Installations- und Betriebsanleitung

Sun Microsystems

Sun Microsystems Netra t 1125 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire V210 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Fire 4810 Installationsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V440 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Solaris 7 11/99 Montageanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung