Sun Microsystems Sun Fire X4150 Server Bedienungsanleitung

Sun Microsystems, Inc.

www.sun.com

Submit comments about this document at: http://www.sun.com/hwdocs/feedback

Sun Fire™ X4150

Volume Conﬁguration Guide

Part No. 820-6409-10

March 2009 Revision A

THIS PRODUCT CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF SUN MICROSYSTEMS, INC. USE,

DISCLOSURE OR REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF SUN MICROSYSTEMS,

INC.

This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, StarOfﬁce, Sun

Ray, Galaxy Sun Fire X and the SunSpectrum Pac (Sunburst design) logo are trademarks or registered trademarks of Sun Microsystems, Inc. in

the U.S. and other countries. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other

countries. Intel Inside is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

This product is covered and controlled by U.S. Export Control laws and may be subject to the export or import laws in other countries. Nuclear,

missile, chemical biological weapons or nuclear maritime end uses or end users, whether direct or indirect, are strictly prohibited. Export or

reexport to countries subject to U.S. embargo or to entities identiﬁed on U.S. export exclusion lists, including, but not limited to, the denied

persons and specially designated nationals lists is strictly prohibited.

Use of any spare or replacement CPUs is limited to repair or one-for-one replacement of CPUs in products exported in compliance with U.S.

export laws. Use of CPUs as product upgrades unless authorized by the U.S. Government is strictly prohibited.

CE PRODUIT CONTIENT DES INFORMATIONS CONFIDENTIELLES ET DES SECRETS COMMERCIAUX DE SUN MICROSYSTEMS, INC.

SON UTILISATION, SA DIVULGATION ET SA REPRODUCTION SONT INTERDITES SANS L’AUTORISATION EXPRESSE, ECRITE ET

PREALABLE DE SUN MICROSYSTEMS, INC.

Cette distribution peut des éléments développés par des tiers. Sun, Sun Microsystems, le logo Sun, Java, Netra, Solaris, StarOfﬁce, Sun Ray,

Galaxy Sun Fire X et le logo SunSpectrum Pac (Sunburst design) sont des marques de fabrique ou des marques déposées de Sun Microsystems,

Inc. aux Etats-Unis et dans d’autres pays. Intel est une marque de fabrique ou une marque déposée de Intel Corporation ou de sa ﬁliale aux

Etats-Unis et dans d’autres pays. Intel Inside est une marque de fabrique ou une marque déposée de Intel Corporation ou de sa ﬁliale aux Etats-

Unis et dans d’autres pays.

Ce produit est soumis à la législation américaine sur le contrôle des exportations et peut être soumis à la règlementation en vigueur dans

d’autres pays dans le domaine des exportations et importations. Les utilisations ﬁnales, ou utilisateurs ﬁnaux, pour des armes nucléaires, des

missiles, des armes biologiques et chimiques ou du nucléaire maritime, directement ou indirectement, sont strictement interdites. Les

exportations ou reexportations vers les pays sous embargo américain, ou vers des entités ﬁgurant sur les listes d’exclusion d’exportation

américaines, y compris, mais de maniere non exhaustive, la liste de personnes qui font objet d’un ordre de ne pas participer, d’une façon directe

ou indirecte, aux exportations des produits ou des services qui sont régis par la législation américaine sur le contrôle des exportations et la liste

de ressortissants spéciﬁquement désignés, sont rigoureusement interdites.

L’utilisation de pièces détachées ou d’unités centrales de remplacement est limitée aux réparations ou à l’échange standard d’unités centrales

pour les produits exportés, conformément à la législation américaine en matière d’exportation. Sauf autorisation par les autorités des Etats-

Unis, l’utilisation d’unités centrales pour procéder à des mises à jour de produits est rigoureusement interdite.

How to Add Components to Your

Limited Configuration Server

Test the Current Configuration

Always test the current configuration before upgrading the server.

Adding Components to the Server

The component installation procedures in this document contain important

installation and validation information that can assist you in successfully

configuring the server.

Testing the Current Configuration

1Ensure that all internal components are properly seated and install the

cover.

2Boot the server using the server’s Tools and Drivers CD/DVD.

3The server should pass POST and boot to the Tools and Drivers CD’s

main menu.

4Troubleshoot any front panel fault indicators before customizing the

server.

2Sun Fire X4150 Configuration Guide • March 2009

How to Add Memory (DIMMs)

Note – Sun-approved memory is the only memory guaranteed to meet the reliability

and quality levels required for optimal performance of Sun Fire servers. Use only

DIMMs approved and supported by Sun.

Install DIMMs in Matched Part Number Pairs Only.

DIMMs must be installed in matched part number pairs. Matched part number pair

DIMMs have the same size, the same speed, and the same manufacturer.

Install Larger Capacity DIMMs in Lower-Numbered Slots

Larger capacity DIMMs must be installed in lower-numbered slots. If the DIMMs

that you are installing are larger capacity than the DIMMs already installed in the

server, do the following:

Installing DIMMs in Matched Part Number Pairs

• Inspect the label on the DIMMs to ensure the following:

• Same manufacturer

• Same part number

Installing Larger Capacity DIMMs in Lower-Numbered Slots

1Remove smaller capacity DIMMs from lower-numbered slots and replace

with larger capacity DIMMs.

2Install smaller capacity DIMMs in the next available higher-numbered

slots.

For example:

If the server is configure with two 2 GB DIMMs in slots A0/B0 and you

want to install two additional 4 GB DIMMs:

• Remove the two 2 GB DIMMs from slots A0/B0

• Install the two 4 GB DIMMs in slots A0/B0

• Install the two 2 GB DIMMs in slots C0/D0

How to Add Components to Your Limited Configuration Server 3

Install DIMMs According to the Following Map

Insure DIMMs are Properly Seated and Locked

DIMMs that are not properly seated and locked are easily dislodged when shipped

or moved.

Seating and Locking DIMMs

• Insert DIMMs into the DIMM slots and lock the DIMMs using the two

locking levers.

4Sun Fire X4150 Configuration Guide • March 2009

Test Installed DIMMs

Verify that the server can see all installed DIMMs.

How to Add a DVD/USB Drive

■The server ships with filler panels for a vacant DVD drive slot and each vacant

HD slot.

■You must install the DVD drive/USB hub before you install the hard drives.

Testing Installed Memory

• Reassemble the server and use one of the following methods to verify the

DIMMs:

• Boot from the Tools and Drivers DVD and access the diagnostics by selecting

the option to run hardware diagnostics (option 1).

• Log in to the service processor’s (SP) ILOM using ssh or a browser and the IP

address of the SP.

Adding a DVD/USB Drive Unit

1Eject all hard drives and HD filler panels.

2Remove the DVD filler panel.

How to Add Components to Your Limited Configuration Server 5

Note – If the DVD drive hangs, during testing, contact Sun service. The issue might

be a low-level inter-operability issue between the USB translation device and the

system. The issue is usually resolved by replacing an internal board.

How to Add SAS Hard Drives

See the Sun Intel Adaptec BIOS RAID Utility User’s Manual (820-4708).

SAS HD Installation Rules

■Do not mix SAS and SATA drives in the same volume.

■SATA hard drives are not supported on the Sun Fire X4150.

■Supported HBA cards:

■Sun StorageTek PCIe SAS 8-Port Internal HBA, SGXPCIE8SAS-I-Z, LSI SAS

1068E (hardware RAID support)

■Sun StorageTek SAS RAID 8-Port Internal HBA, SG-XPCIESAS-R-INT-Z,

Adaptec/Intel-based (hardware RAID support)

■If you are also adding a DVD/USB unit, install the unit before installing hard

drives (see “How to Add a DVD/USB Drive” on page 4).

■Hard drives must be initialized before the drives can be seen by the HBA and

before an OS can access the disks.

3Slide the DVD/USB drive*unit into the DVD slot and engage the connector on

the backplane.

4Populate the HD slots with hard drives or hard drive filler panels.

5Test the DVD drive by booting the server using the Tools and Drivers DVD and

accessing the Pc-Check diagnostics.

* Use the -09 (or later) revision of the DVD/USB drive unit.

Adding a DVD/USB Drive Unit (Continued)

6Sun Fire X4150 Configuration Guide • March 2009

Verify Hard Drives

Use the PCIe HBA’s BIOS utility to verify that the card sees the hard drives.

■When using the Sun StorageTek (Adaptec) HBA card, you must first initialize the

hard drives using the card’s BIOS (even for single-disk configurations) so the an

OS can see the drives (use the Adaptec-based procedure below). The LSI card

automatically manages this step and does not require manual initialization of

drives (use the LSI-based procedure below).

Adding SAS Hard Drives

1 Install drives according to the following drive map:

HD1 HD3 HD7 DVD/USB Drive

HD0 HD2 HD4 HD5 HD6

2 Remove protective covers from the connectors on the card and install the HBA

(PCIe SAS 8-port internal disk controller)*

* Supported HBAs: Sun StorageTek PCIe SAS 8-Port Internal HBA, SGXPCIE8SAS-I-Z, LSI SAS 1068E and Sun

StorageTek SAS RAID 8-Port Internal HBA, SG-XPCIESAS-R-INT-Z, Adaptec/Intel-based

3 Take the free end of the cable that is attached to the disk backplane on the left-

hand side (disks 0-3) and connect it to the Mini-SAS x4 connector on the card

labeled Port 0, 0-3.

4 Take the free end of the cable that is attached to the disk backplane on the right-

hand side (disks 4-7) and connect it to the Mini-SAS x4 connector on the card

labeled Port 1, 4-7.

How to Add Components to Your Limited Configuration Server 7

■After installation, if you see inconsistent or non-illuminated HD LEDs, you might

need to update the backplane and the controller firmware using the server’s Tools

and Drivers DVD.

Verifying Hard Drives Using the LSI-Based Sun StorageTek PCIe SAS 8-port Internal HBA

1 Power on the server and watch the output for the prompt to press Ctrl-C.

2 When the prompt appears, press Ctrl-C.

3 From the main menu, select SAS Topology.

4 Verify that all installed drives are seen by the HBA, and replace any drives that

are not seen.

Verifying Hard Drives Using the Adaptec-based Sun StorageTek PCIe SAS 8-port Internal HBA

1Boot the server and watch the output for the prompt to press Ctrl-A to enter the

Adaptec RAID Configuration Utility (ARCU).

2When the prompt appears, press Ctrl-A. The Adaptec RAID Configuration Utility

main menu appears.

Initializing the Disks

1From the Adaptec RAID Configuration Utility main menu, select Create Array.

2Select Initialize Disks. A list appears showing disks seen by the HBA card.

a. If an installed disk does not appear in the list, replace it.

3Use the Insert key to add each disk to the list on the right.

4When done adding disks to the list, press Enter.

5To verify the drives, press the ESC key to exit to the main menu.

Verify the Hard Disks

1Select Disk Utilities.

2Highlight a drive in the list by using the up or down arrow key, press enter and,

from the menu that appears, select Identify Drive and press Enter. This action

blinks the HD LED.

3Verify that the selected HD LED blinks.

4Select Identify Drive for each HD.

5When done, press ESC to exit to the main menu. The main menu appears.

Creating a Volume for Each Drive

1From the utility’s main menu, Select Array Configuration Utility.

2From the main menu, select Create Array to create a volume for each disk.

3Use the arrow key to highlight drive 0.

8Sun Fire X4150 Configuration Guide • March 2009

Test Hard Drives

Note – To expedite hard drive testing use the 1% test coverage.

How to Add and Test PCIe Cards

■Slot0 - slot2 can accommodate x16 mechanical cards.

■The disk controller HBA card must be inserted into slot 1 (the middle slot).

■After installation, update the firmware level for each card as specified by the

manufacturer.

4Use the insert key to add drive 0 to the Selected Drives list on the right and press

enter.

5Label the volume (you can use the drive volume number) and press Enter

6Accept the defaults for Read Caching and Write Caching and press Enter.

7Select Build for the Create RAID Via option and press Enter

8Press Enter to build the volume.

9Repeat the steps to create a volume for each drive.

Testing Hard Drives Using Pc-Check

1Boot the server with the Tools and Drivers CD to access the diagnostics.

2Select the option to Run Hardware Diagnostics.

3Select the option to test hard drives.

Adding PCIe Cards

1Connect PCIe cards to a riser assembly.

2Insert the PCIe card and riser assembly into a PCIe slot on the motherboard.

3Update the firmware level for each card as specified by the manufacturer.

Testing PCIe Cards

1If the option exists invoke the cards built in self-test.

2Test the card by performing basic rudimentary activities. For example, establish

network connectivity (for a GigabitEthernet card).

Verifying Hard Drives Using the Adaptec-based Sun StorageTek PCIe SAS 8-port Internal HBA

Andere Handbücher für Sun Fire X4150 Server

Inhaltsverzeichnis

Andere Sun Microsystems Server Handbücher

Sun Microsystems

Sun Microsystems Sun Fire E25K Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Ray 100 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 3000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra T5220 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V20z Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra 440 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Netra X4200 M2 Handbuch

Sun Microsystems

Sun Microsystems Cobalt LX50 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Blade X8400 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun StorEdge Switch-8 Installationsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X4100 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Ultra Enterprise 450 Service-Handbuch

Sun Microsystems

Sun Microsystems Sun Fire V890 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Enterprise 6 00 Series Bedienungsanleitung

Sun Microsystems

Sun Microsystems Solaris 7 11/99 Montageanleitung

Sun Microsystems

Sun Microsystems Sun Fire T1000 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Netra CP3250 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Enterprise 220R Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Fire E6900 Technisches Handbuch

Sun Microsystems

Sun Microsystems Sun Fire V20z Programmierhandbuch

Sun Microsystems

Sun Microsystems Sun Fire X4250 Installations- und Betriebsanleitung

Sun Microsystems

Sun Microsystems Sun Fire X2250 Installations- und Betriebsanleitung

Sun Microsystems

Sun Microsystems Sun Fire V215 Bedienungsanleitung

Sun Microsystems

Sun Microsystems Sun Blade T6300 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung