Sunco SHG-40W Bedienungsanleitung
Lighting made better.
support@sunco.com
(844) 334-9938
AMERICAN
COMPANY
SKU: SHG-40W
User Manual
4ft. LED Grow Light, 40W
Grow Light
Whats in the Box?
1
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference.
2.) This device must accept any interference that
may cause undesired operation. Please review all
instructions carefully prior to installation.
To reduce the risk of fire, electric shock, or physicl injury:
• Turn o power before changing fixture.
• Suitable for use in damp environments at
temperatures ranging from 4°F to 113°F. Not for use
where directly exposed to water.
• Not intended for use with emergency fixtures.
• Not compatible with photo controls.
• Not compatible with occupancy sensors.
• Not compatible with dimmers.
• Not compatible with timing devices.
• All electrical connections must be in accordance with
local and National Electric Code (N.E.C.) standards.
• Please review installation manual carefully before
proceeding. Consult a qualified electrician if you are
unfamiliar with proper electrical wiring connections.
WARNING:
Cncer & Reproductive Hrm- www.P65Wrnings.c.gov
Safety Information
a. Drill pilot holes 46.5 inches apart.
b. Insert two plastic anchors, then screw each eye hook
into an anchor.
a. Depending on your lighting plan, space any additional
anchors accordingly.
b. Link up to 4 shop lights together
a. Turn off circuit breaker before installation.
b. Surface must support fixture weight.
Plaster board: Requires 3/8” thickness. Use #8 eye hook
screws with anchors or expansion bolts (not included).
STEP 1
STEP 3
STEP 2
2
ON
OFFOFF
Connect to
Power Outlet Up to 4
Connect to
additional lights
Installation Guide - Suspension Mount
46.5"
a. Insert a hook-chain into each slot of the light fixture.
Repeat for each slot (there should be 4 total).
b. Use pliers to crimp ends and secure as needed.
a. Plug the power cord into an electrical outlet. Turn on the
circuit breaker and test the light.
b. Distance between lamp and plant surface should be
between 11.81 - 23.62 inches.
STEP 5
STEP 4
STEP 6
3
11.81”- 23.62”
Side
Installation Guide - Surface Mount
a. Attach loose ends of each chain onto corresponding eye
hooks on the ceiling.
a. Depending on your lighting plan, space any additional
anchors accordingly.
b. Link up to 4 shop lights together
a. Turn off circuit breaker before installation.
b. Surface must support fixture weight.
Plaster board: Requires 3/8” thickness.
STEP 1
STEP 3
STEP 2
4
ON
OFFOFF
Connect to
Power Outlet
46”
Connect to
additional lights
0.33”
3.25”
Installation Guide - Surface Mount
Up to 4
a. Install 2 plastic anchors 3.25 inches apart, repeat this step for
an additional pair of plastic anchors 46” inches away from the
initial pair of plastic anchors. Insert a screw into each anchor.
b. Plastic anchor and screw positions should match mounting
holes on the back side of the light fixture. The gap between the
screw cap and ceiling should be 0.33 inches.
a. Lift fixture up to screws and slide to one side to secure
into place. Fixture should be firmly fixed against screws.
a. Distance between lamp and plant surface should be
between 11.81- 23.62 inches.
a. Plug the power cord into an electrical outlet.
b. Turn on the circuit breaker and test the light.
STEP 5
STEP 4
STEP 6
5
11.81”- 23.62”
ON
OFFOFF
Installation Guide - Surface Mount (Cont.)
Voltage
Wattage
Power Factor
Beam Angle
PPF
PAR
Dimmable
2” Height
5.3” Width 47.2” Length
5 ft. Length
120V
40W
>0.7
120°
13.75umol/s
3106.321mW
No
50000 hrs
380nm to 780nm
Dmp
80
Indoor
60Hz
3 Yers
Average Lifetime
Full Spectrum
Moisture Rating
CRI
Usage
Frequency
Warranty
Dimensions
Specifications
6
Product Details
Light Distribution Angle
Lighting distribution angle refers to the spread of
light emitted from a light source. It is an important
factor to consider when selecting a fixture or
bulb, as it aects the way it will illuminate an area.
There are two main types of lighting distribution
angles: A symmetric lighting distribution emits
light evenly in all directions, creating a cone-
shaped pattern that provides a pool of light. This
type of lighting is ideal for general lighting and
illuminating large areas. Common applications for
symmetric lighting include general area
illumination, security lighting, and perimeter
lighting. Symmetric lighting is also used to a
certain degree in up-lighting. An asymmetric
lighting distribution angle, also known as beam
angle, creates a pattern that focuses light in a
specific direction. This type of lighting is ideal for
task lighting as it reduces glare and light spill in
other areas. Common applications include task
lighting in spaces such as landscape settings,
retail stores, museums, and much more. It is
important to note that the lighting distribution
angle can also be aected by other factors such
as the reflector design of the light source, the type
of lens used, and the distance between the light
source and the surface being illuminated.
7
UNIT:cd
AVERAGE BEAM ANGLE (50%): 119.7 DEG
Luminous Intensity Distribution 1
C/
C/
.°
.°
0
30
60
90
120
150-150
-120
-90
-60
-30
0
156
312
468
624
780
This product is covered by our
industry leading 3 year warranty.
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:
Customer Service
Warranty Policy
30 Day Return Policy
At Sunco, we value our customers and
stand by the quality and performance of
our products.
If you are not completely satisfied with
your purchase, we accept returns within
30 days of your purchase date.
Customer Support
It gets even better - scan the QR code
for 2 extra years of protection!
Call or Text:
Email:
8
support@sunco.com
(844) 334-9938
Lighting made better.
REV1.0
AMERICAN
COMPANY
Inhaltsverzeichnis
Andere Sunco Beleuchtungsausrüstung Handbücher
Sunco
Sunco SHOEBOX 150W Bedienungsanleitung
Sunco
Sunco EX 2H-RED Bedienungsanleitung
Sunco
Sunco EM 2HFL-1PK Bedienungsanleitung
Sunco
Sunco DL SL6-HO Bedienungsanleitung
Sunco
Sunco GD FF8 SR-BK-2400K Bedienungsanleitung
Sunco
Sunco WRAPAROUND 5" Bedienungsanleitung
Sunco
Sunco MOTION SHOP LIGHT Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
