www.sundaya.com
The installation of S4a consist of the following steps:
1. Selection of suitable location
2. Installation of wall mounting bracket
3. Installation of Hub 1 cabling system
4. Starting up the system
With DC low voltage systems it is important to locate the
Storage System close to the appliance that consumes most
power.
Installation
Step 1 : Selection of suitable location.
www.sundaya.com
If you for example intend to use your S4a for powering
lights and a computer or TV ; then the most power
consuming loads will be the TV or computer , and
thus the S4a must be located as near as possible
to this appliance in order to prevent unnecessary
voltage drop in long cables.
6www.sundaya.com
The first and most famous creation
of Sundaya. Often copied but never
rivalled. Introduced in 1994, this
12VDC light has now proven its
reliability of more than 10 years.
Millions installed in homes worldwide.
Exists in 6W and 10W, producing an
undistinguishably similar brightness of 210
lumen and 280 lumen respectively.
DC Lighting
Waterproof lamp for outdoor
heavy weather conditions. The
double-U CFL tubes are
housed in an assembly of
unbreakable handle and
polycarbonate cover, mounted
together with strong nylon
screw rings and rubber
gaskets. Available in 5W,
7W and 10W, producing
175, 245 and 350 lumen
brightness
respectively.
Our top of the line high efficiency
CFL with a lifetime of over 10,000
hours. Comes in a two-piece
assembly allowing replacement of
the triple-U tubes. The base has an
integrated preheat inverter that helps
extend lifetime and increase its
brightness.
The brightness ranges from 120 lumen
for the Ulux3, to 800 lumen for the
Ulux18.
Economical CFL lights with a
lifetime above 8,000 hours. The
Ulite has an integrated instant
start inverter.
Available in 3W, 6W and
9W, producing brightness
of 120, 240 and 360
lumen respectively.
Our small but beautiful 0.5W/2W
incandescent lamp, ideal for bedroom
or corridor night light. Consumes very
little power. Available in 3 shades: red,
purple and white.
19
