5
3.3 Electric safety directions
•When installing, repairing or servicing the heater it must be turned off and disconnected from
power.Before installation please check if the heater is free of damages.
•If the heater or the power cord is damaged in any form do NOT use the heater and contact your
Sundirect dealer for repair or replacement.Repairs, maintenance or any changes must be carried
out by an authorized Sundirect dealer.
•Do NOT attempt to repair the heater by yourself, this will void your warranty.
•If the heater has been dropped do NOT operate it and contact your Sundirect dealer to make
sure it is free of any damages.
•If the safety glass from the GD-Plus/MD-Plus series is damaged in any way please dismount
the heater as soon as possible to avoid any injuries from possible impact of the falling glass.
•Sundirect heaters are designed to operate at 220-240V, 50Hz AC. If your supply mains do
not comply with this, do NOT use the heater.
3.4 Water Proof
Sundirect infrared heaters have different IP ratings on different models.Please make sure to only
install heaters with IP44 rating in humid rooms.Heaters with IPX2ratings are not suitable to be
installed in bathrooms etc.Please carefully check the specifications to confirm if your heater is
suitable for installation in humid rooms.
This heater is not suited for installation outdoors. Installations in humid rooms must be carried out
by aqualified electrician/installer and must comply with the local electrical safety requirements.
When installing the heater in humid rooms it must be secured in such way that there is no risk of
the heater falling into any water container.Never pour water on the device or put it in awater
container.The installer must make sure that switches and electrical controls cannot be touched by
any person in ashower/bathtub/swimming pool etc.
Sundirect shall not be liable for any injuries or damages resulting from inadequate mounting or
incorrect positioning close to water sources.
4. How to care for your Sundirect heater
1. Cleaning
Always unplug your heater and let it cool down completely before cleaning.Never dip into water
and never splash water on it.Clean the heater with asoft damp cloth.For glass models such as the
GD, MD series use asoft cloth and glass cleaner. Never use awet cloth and make sure to dry the
heater when clean with adry cloth.Do not use any abrasive materials, solvents or harsh cleaning
sponges as this could cause scratches or other irreparable damage.Before operating the heater
again it must be completely dry.
2. Using/Working
Please note that the heater may discolour with use.This is due to airborne pollution and is not a
fault.If you wish to add apicture print to your heater please contact aSundirect dealer.Do not
cover your heater with apicture foil and do not paint or print the heater yourself.This might cause
damage to the heating element and will void your warranty.
