Sundstrom SR562 Technisches Handbuch

2020-05-07

OI06H-5118 SR 562 1

Operation instruction

SR 562

Hood

Revision: 02

General information

Instructions for use for SR 562 should be read before use.

The SR 562 together with fan unit SR 500 / SR 500 EX / SR 700 and approved filters are included in the

Sundström fan-assisted respiratory protective device system conforming to EN 12941/EN 12942:1998 class TH3.

Combination of SR 562-SR 500 EX is specially constructed for use in potentially explosive and fire hazardous

environments. See user instructions or label on fan unit for classification.

SR 562 together with compressed air attachment SR 507 conforming to EN 14594:2005 class 3A/3B.

When selecting equipment for SR 562 some of the factors that should be considered are as follows:

• Type of pollutant

• Concentrations

• Work intensity

• Protection requirements in addition to respiratory protective advice.

Risk analysis should be carried by a person who has suitable training and experience in the area.

2020-05-07

OI06H-5118 SR 562 2

Unpacking SR 562

Packing list:

• Hood with breathing hose

• User instruction

• Cleaning tissue

2020-05-07

OI06H-5118 SR 562 3

1. Functional check

2020-05-07

OI06H-5118 SR 562 4

1.1 Place the facepiece in the

bag and grip the opening of

the bag so that it seals

around the breathing hose.

Grip the flow meter with the

other hand and hold it so that

it points vertically up from the

bag.

1.2 Read the position of the

ball in the tube. It should float

level with or just above the

marking on the tube.

If the flow rate is below the minimum value, check that

• The flow meter is vertical.

• The float can move freely.

• The air supply is not restricted by kinks or other restrictions in the

hoses.

2. Connect the hose

2020-05-07

OI06H-5118 SR 562 5

2.1 Check that the O-ring of

the hose is in place.

2.2 Connect the hose to the

fan unit or compressed air

attachment…

2.3 …and turn it clockwise

about 1/ 8 of a turn.

3. Donning

2020-05-07

OI06H-5118 SR 562 6

3.1 Grip the hose mounting

with one hand and the neck

section of the hood with the

other

3.2 Insert your chin into the

hood. Keep your grip of the

hood and draw it over your

head.

3.3 Adjust the hood so that it

seals all the way round your

face and fits closely and

comfortably. The rubber band

in the face seal can be

adjusted to the required

length.

3. Donning

2020-05-07

OI06H-5118 SR 562 7

3.4 If necessary adjust the

hood by means of the knob

right at the back of the head

harness. The knob is on the

inside of the hood behind the

hose. You can reach it without

taking off the hood. Turn

clockwise to tighten and

counter clockwise to widen.

3.5 If necessary, adjust the

head harness in height by

lengthening or shortening the

strap for the top of the head.

3.6 Make sure that the

breathing hose runs along

your back and is not twisted.

4. Change the sweatband

2020-05-07

OI06H-5118 SR 562 8

4.1 Remove the Velcro tapes.

4.2 Release the face seal

rubber bands secured to the

forehead band next to the

Velcro tapes.

4.3 The sweat band is

secured with Velcro tape to

the forehead band.

Pull the sweat band off.

4.4 Fit the Velcro tape with

the rough side towards the

forehead band and the notch

at the top.

5. Change the Tyvec-hood , harness

2020-05-07

OI06H-5118 SR 562 9

5.1 Release the hose from

the adapter.

5.2 Release the face seal

rubber bands secured to the

forehead band next to the

Velcro tapes.

5.3 Remove the Velcro tapes.

5.4 Release the three press

studs at the top edge of the

visor

Lift the head harness out of

the hood.

5. Change the Tyvec-hood , harness

2020-05-07

OI06H-5118 SR 562 10

5.5 Place the new hood in

front of you, with the visor

facing downwards.

5.6 Grip the front part of the

head harness with one hand

and insert the head harness

into the hood, first inserting

the rear part fitted with the

hose.

5.7 Secure the hood by

means of the press-studs at

the top edge of the visor.

5.8 Fold the Velcro tapes

around the forehead band

and secure them as firmly as

possible.

Andere Handbücher für SR562

Inhaltsverzeichnis

Andere Sundstrom Dunstabzugshaube Handbücher

Sundstrom

Sundstrom SR 63 Bedienungsanleitung

Sundstrom

Sundstrom SR 530 Bedienungsanleitung

Sundstrom

Sundstrom SR562 Bedienungsanleitung

Sundstrom

Sundstrom SR 520 Technisches Handbuch

Sundstrom

Sundstrom SR77-3 Bedienungsanleitung

Sundstrom

Sundstrom SR561 Bedienungsanleitung

Sundstrom

Sundstrom SR 77-3 Smoke Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch