Sunfire TGM-100 Server Bedienungsanleitung

TGM-100 Server

TGM-100C Client

Theater Grand

Media Player

User’s Manual

1. Read Instructions

2. Keep these Instructions

3. Heed all Warnings.

4. Follow all Instructions

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including ampli-

ers) that produce heat.

8. Unplug this apparatus during lightning storms or when

unused for long periods of time.

9. Refer all servicing to qualied service personnel. Servic-

ing is required when the apparatus has been damaged in

any way, such as a power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the appa-

ratus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

10. Ventilation — The apparatus should be situated so

that its location or position does not interfere with its proper

ventilation. For example, the apparatus should not be situ-

ated on a bed, sofa, rug, or similar surface that may block

any ventilation openings; or placed in a built-in installation

such as a bookcase, cabinet, or closed equipment rack that

may impede the ow of air through ventilation openings.

11. Power Sources — The apparatus should be connected

to a power supply only of the type described in these op-

eration instructions or as marked on the apparatus.

12. Power Cord Protection — Power-supply cords should

be routed so that they are not likely to be walked upon or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit the apparatus.

13. Non-use Periods—The power cord of the apparatus

should be unplugged from the outlet when unused for a

long period of time.

14. Object and Liquid Entry — Care should be taken so

that objects do not fall into and liquids are not spilled into

the inside of the apparatus.

15. Servicing — The user should not attempt to service

the apparatus beyond those means described in this

operating manual. All other servicing should be referred to

qualied service personnel.

Important Safety Instructions

SAFETY

User’s Manual

16. To prevent electric shock, do not use this polarized

plug with an extension cord, receptacle or other outlet

unless the blades can be fully inserted to prevent blade

exposure.

Pour préevenir les chocs électriques ne pas utiliser cette

che polariseé avec un prolongateur, un prise de courant

ou une autre sortie de courant, sauf si les lames peuvent

être insérées à fond sans laisser aucune parIVe à décou-

vert.

17. Grounding or Polarization — Precautions should be

taken so that the grounding or polarization means of the

Component is not defeated.

This apparatus does not exceed the Class A/Class B (which-

ever is applicable) limits for radio noise emissions from digital

apparatus as set out in the radio interference regulations of

the Canadian Department of Communications.

ATTENTION — Le présent appareil numérique n'émet pas

de bruits radioélectriques dépassant las limites applicables

aux appareils numériques de class A/de class B (selon le

cas) prescrites dans le règlement sur le brouillage radioé-

lectrique édicté par les ministere des communications du

Canada.

WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRO- DU-

IRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL

ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE

810–“RADIO AND TELEVISION EQUIPMENT”

GROUND CLAMP

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

LEAD IN WIRE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

ENTRANCE

EQUIPMENT

GROUND CLAMPS

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

NEC NATIONAL ELECTRICAL CODE.

NOTE TO CATV INSTALLER

This reminder is to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

OUTSIDE ANTENNA GROUNDING

If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,

NSI/NFPA 70, provides information with regard to proper grounding of the lead-in wire to an antenna-discharge

unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure above.

SAFETY

User’s Manual

IMPORTANT SAFETY INSTRUCTIONS ......................2-3

INTRODUCTION..............................................................4

CHAPTER 1: QUICK START GUIDE .......................... 5-8

Remote Control ...........................................................5

DVD/CD Player............................................................6

Playing Music ..............................................................6

Playing Movies ............................................................7

User Interfaces ............................................................7

CHAPTER 2: CONNECTIONS AND REMOTES........9-15

TGM-100 Front View ...................................................9

TGM-100 Rear View.................................................. 10

Remote Control .................................................... 11-15

CHAPTER 3: TV USER INTERFACE .......................16-26

Playing a CD/DVD ..................................................... 18

Recording .............................................................18-20

Music Library ........................................................20-24

Movie Library ........................................................25-26

CHAPTER 4: ADMIN USER INTERFACE................ 27-35

Editing Audio Library.............................................27-31

Editing Video Library.............................................31-33

Settings.................................................................34-35

CHAPTER 5: WEB USER INTERFACE ................... 36-37

CHAPTER 6: USING A COMPUTER........................ 38-40

APPENDIX ................................................................ 41-61

Software Updates ...................................................... 41

Touch Panel User Interface ....................................... 42

Troubleshooting Guide ......................................... 43-44

Remote Control Codes .........................................45-49

Hardware Specications....................................... 50-51

Terms and Conditions...........................................52-60

Limited Warranty........................................................ 61

Service Assistance .................................................... 61

Contents

Read the Safety Instructions carefully before

connecting and using your TGM-100 Digital Media

Server.

Chapter 1 is a general introduction to the features,

details and control of your TGM-100.

Chapter 2 shows many options for connecting

your source equipment to the TGM-100 and also

describes the basics of using the remote control.

Chapter 3 contains detailed information on the

TGM-100’s Main TV UI.

Chapter 4 contains detailed information on the

TGM-100’s Admin UI.

Chapter 5 introduces the Web UI.

Chapter 6 provides information on using a computer

to access the TGM-100.

The Appendix shows some additional information,

including a troubleshooting guide, the Warranty and

service assistance details.

To nd out more about this and other Sunre

products, please visit our website: www.sunre.com

User’s Manual

Introduction

Congratulations on your purchase of the incredible Theater

Grand Media System - the only server solution of its kind to

deliver the luxury and performance that the name Sunre

symbolizes. Highly robust and purpose-built, The TGM Se-

ries is an expandable server/client and hard drive system

for storing, managing and playing your entire collection of

movies and music.

Using an external storage device of a capacity to suit your

requirements, large libraries of DVDs and CDs can be

stored and replayed at the touch of a button. All movies

and music are accessed via intuitive Graphical User

Interfaces (GUIs), and can be displayed in a variety of

ways to match your individual preferences.

Additional information about your movies and music is

automatically downloaded from the Internet to make it

a breeze to nd your favorites. An industry-rst, layered

metadata service, searches multiple providers to ensure

not only the highest hit rate possible, but also the best

quality album and movie artwork.

Enjoy rediscovering your media!

User’s Manual

CHAPTER 1 – Quick Start

Quick Start Guide

Your TGM-100 supports several different types of connec-

tion to televisions, and automatically detects which is being

used when you power it on. Please ensure that all con-

nected peripheral devices are switched on before turning

on your TGM-100.

Turning the Unit On and Off

To switch the unit on, press the ;button on the front

panel. The Power LED will ash red to blue for a period

of time, then glow steadily blue to indicate that the unit

is powered on. Once the unit has completed the power

on process, the TV User Interface will display the Home

Screen.

Your TGM-100 is designed to remain switched on continu-

ously. However, if you are not planning to use it for an

extended period, you may switch the unit off.

To turn the unit off, press the• ;button on the front

panel. After a brief period, the unit will switch off and

the Power LED will turn red.

Using the Remote Control

Press the• àLibrary button to display the Home

Screen.

Use the• Sand T buttons to highlight different items

on the display.

Press• OSelect to choose media.

Press• JMenu to navigate through sub-menus like

Albums, Artists, Genres, Titles, Actors etc.

Press the• OSelect button to select an item from the list.

Press the• Pbutton to go back a level, cancel, exit

or delete the current operation according to the

information on screen.

Press the• •Now Playing button to see details of

the album or movie which is currently being played. If

playing a movie, it will be stopped.

User’s Manual

CHAPTER 1 – Quick Start

The DVD/CD Player

Place a CD or DVD in the slot.•

Press the• àLibrary button to view the Home Screen.

Select • Disc.

If your TGM-100 is connected to the Internet, details of the

disc content will be found automatically and displayed on

the screen.

Select • Play Disc or Record Disc from the TV User

Interface. You may also begin playback by pressing the

aPlay button on the remote control.

The Recording display shows recording progress with an

indication of the time remaining to completion. The Now

Playing screen shows the length of the track being played

and how long it has been playing.

Playing Music From the Library

Press the• àLibrary button to display the Home

Screen.

Use the• Sand T buttons to highlight Music and press

the OSelect button.

The• JMenu button lets you choose how you want to

browse your music collection; for example by Tracks,

Albums, Artists, or Genres. Select the grouping you

prefer and press the OSelect button.

To play a piece of music, highlight it in the list and•

select the Play option using the Sand T buttons. You

may also simply press the aPlay button on the remote

control.

You may choose between • List View and Cover View

when you make a selection.

List view shown:

Cover view shown:

User’s Manual

CHAPTER 1 – Quick Start

Playback Transport Buttons

To stop playback, press the• gStop button on the

remote control.

To pause playback, press the• hPause button.

Press the• e or fSkip button to skip to the next or

previous track.

Hold down the• cor dSeek button to seek forward

or backward within the current track.

Play resumes from the new position when you release the

button.

You may also use the transport buttons on the TV UI to

control playback functions.

Press the• •Now Playing button to see details of

the currently playing selection.

Use the remote's• U,V,Sand Tbuttons to navigate

to the desired function.

Press• OSelect when you have the desired function

highlighted.

Playing Movies From the Library

Press the• àLibrary button to display the Home

Screen.

Use the• Sand T buttons to highlight Movies and

press the OSelect button.

Press• JMenu to display the movies in your library in

various ways; for example Titles, Actors, Directors or

Ratings. Highlight the grouping you prefer and press

the OSelect button.

To play a movie, select it from the list and use the•

OSelect button to select Play Title. You may also

start playback by simply pressing the aPlay button on

the remote control.

You may also choose between • List View and Cover

View when you select a movie.

Playback Transport Buttons

The transport buttons on the remote control work in much

the same way as they do when playing music, with the fol-

lowing exceptions:

The• gStop button pauses and resumes playback and

displays the Now Playing screen.

The• •Now Playing button also stops the movie

currently playing and returns you to the Now Playing

screen. Press a to return to the movie you are

watching.

User’s Manual

CHAPTER 1 – Quick Start

User Interfaces

There are several ways to view the User Interface (UI) of

your TGM-100. Each method will be detailed within this

manual, but some basic concepts are listed here for ease-

of-use when getting started.

TV UI (pgs. 16-26)

The primary method for viewing the UI is on a television.

This is referred to as the TV UI. You will normally use the

included remote control when utilizing this method to con-

trol your TGM-100.

To access this UI, simply turn on a connected television,

switch to the connected TV input, and control the system

using your remote control. The TV UI is used to watch and

record music and movies and to perform basic Setup func-

tions such as Media Lookup, On-line Update, etc. Most

commonly used functions of the TV UI are found on the

Home Screen, shown above.

Touch Panel UI (pg. 51)

The Touch Panel UI provides a method to control the

TGM-100 from touch panels located throughout the home.

The TGM-100 is designed to work with all ELAN wired or

wireless touch panels and provides full control over the

system.

Admin UI (pgs. 27-35)

The Admin UI allows full access to all setup and playback

functions. This UI allows for more complex actions than the

TV UI and has more options, but many of the options are

not required for day-to-day activities. The Admin UI may be

accessed from the main TV using the included remote, or

may be accessed from a PC using a mouse and keyboard.

Web Access (pgs. 36-37)

The Web UI provides a method to control the TGM-100

from any computer located on the same network. The Web

UI is a great way to perform functions that require a key-

board (such as naming Playlists or editing Library contents)

and provides a convenient way to access the system from

anywhere in the home. Any of the previous three User

Interfaces may be accessed from the Web UI.

Instructions on how to access and use each of these UIs is

included later in this manual.

Andere Handbücher für TGM-100 Server

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunfire Medienplayer Handbücher

Sunfire

Sunfire TGM-100 Server Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

limHD

limHD 200i Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Fantec

Fantec MM-HDRL Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Sony

Sony SVR-2000 Benutzerhandbuch

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung