Sunfull 1002-LITE Bedienungsanleitung

Installation instructions

Suitable gateway type（1 network port 4 serial port ：4 RS485, 1 RS232）

Basic version: W7-1041

Gateway version: W7-1041-GW

1.0 Before use the software configuration step (refer to the relevant configuration

software operation manual), please confirm the following:

- the configuration project is correct;(please refer to the X2View configuration software

operation instructions for details)

- upload engineering files to the touch panel;

- simulation test to collect data;

2.0 Touch panel size

7 inch touch panel Hole size: 210.5mm x 146.5mm (L * W) weight: 550g

Installation method: (Card buckle installation)

3.0 wiring instructions

Power supply: AC/DC 9~24V (rated power 5W);

Network port: default IP address 192.168.1.88;

Full isolation RS485 interface: (COM1, COM2, COM3, COM4)

A positive (+) B negative (-) GND (ground)

Full isolation RS232 interface: Rx (2) TX (3) GND (5)

DB9-M: Gateway RX (2) ~~ device TX (3)

Gateway TX (3) ~~ device RX (2)

Gateway GND (5) ~~ equipment GND (5)

DB9-F: Gateway RX (2) ~~ device RX (2)

Gateway TX (3) ~~ device TX (3)

Gateway GND (5) ~~ equipment GND (5)

4.0 Login touch panel Web server

Under the network cable to the Ethernet port, enter the URL on the browser:

http://192.168.1.88/login.html Login Username: admin Password: admin123456

Note: download gateway configuration software after entering the web server, please

refer to the PDF document under the Help folder for specific operation.

5.0 common problems

Q1: how to modify the IP address of the gateway/touch panel?

A1: The gateway factory default IP address 192.168.1.88, subnet mask 255.255.255.0, default

gateway 192.168.1.1.

For the first time using, user need a cable directly connect computer and gateway/touch

panel, and then change the IP address to the computer and gateway/touch panel within the

same network segment (e.g., computer IP to 192.168.1.55), after confirmation to ping, open

the browser, enter the URL: http://192.168.1.88/ login. HTML, log on to the Web server, as

shown above in the " network" column set IP address.

Q2: What if the project files are not found in the computer?

A2: The project files can be downloaded in the configuration software; or login the

gateway/touch panel to the WEB page "download " and click "project file" to download.

Q3: what is the difference between different models of the gateway hardware?

A3:The main models are as follows:

Model

Hardware

Parameter

Interfaces

Supported

Points

Supported Ports

1002-LITE

CPU：240MHz

Memory：32M

1 ethernet

2 serial ports

256

2 RS485 &

2 RS232

1002-ARM

CPU：240MHz

Memory：32M

1 ethernet

2 serial ports

256

2 RS485 &

2 RS232

2004-LITE

CPU：400MHz

Memory：64M

2 ethernets

4 serial ports

1024

4 RS485

2004-ARM

CPU：400MHz

Memory：64M

2 ethernets

4 serial ports

1024

4 RS485

2004-A9

CPU：1.4GMHz

Memory：512M

2 ethernets

4 serial ports

2048

4 RS485

1022-1U

CPU：400MHz

Memory：DDR2

1 ethernets

4 serial ports

1024

4 RS485

Sunfull Gateway model

BACnet Gateway: BAC1002-LITE(economical),BAC1002-ARM,BAC2004-LITE(economical),

BAC2004-ARM, BAC2004-A9

Modbus Gateway: MOD1002-LITE (economical), MOD1002-ARM, MOD2004-LITE (economical),

MOD2004- ARM, MOD2004-A9

Modbus Hub Gateway: HUB1002- ARM, HUB2004-ARM

SMS Alarm Gateway: HMI2004-A9-GPRS

SNMP Gateway: SNMP1002- ARM, SNMP2004-ARM

IEC104 Gateway: IEC 2004-ARM

WEB Configuration Gateway: HMI2004-A9-GW

Sunfull WEB Touch Panel series

Basic version: W7-1041

Gateway version: W7-1041-GW, W10-1041-GW, W15-1041-GW

Sunfull Software Gateway

OPC transfer BACnet: O2B- Softkey, O2B-USBkey

OPC transfer Modbus: O2M- Softkey, O2M-USBkey

OPC transfer Modbus- cloud: O2M-WEB- Softkey, O2M-WEB-USBkey

OPC transfer IEC104: O2I-Softkey、O2I-USBkey

OPC transfer SMS: O2S-Softkey、O2S-USBkey

OPC transfer Web: O2W-Softkey、O2W-USBkey

OPC transfer SNMP: OtS-Softkey、OtS-USBkey

Sunfull OPC server

OPC server: X2O- Softkey, X2O-USBkey

OPC server: OPCHub

Sunfull Free Software

BACnetScan scanning tool, MBUS scanning tool, Niagara interface, and WEBS interface

Welcome to follow Shanghai Sunfull’s wechat public number : BACnet

to know more new products and solutions.

Shanghai Sunfull Automation Co., LTD. TEL: +86-021-58776098

Address: A466,building1, NO.2588,JinhaiRoad,Pudong,Shanghai,China

Technical support E-mail: [email protected]

Technical support Tel: 021-20252795 Website 1: www.bacnetchina.com

SalesTel: 13564889340 Contacts: Linda Chen Website 2: www.opcmaster.com

Dieses Handbuch passt für folgende Modelle

Andere Sunfull Tor Handbücher

Sunfull

Sunfull 1002-ARM Leitfaden

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung