Sungrow SH5K-20 Leitfaden
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 1 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Commissioning of SH5K-20 Hybrid Inverters
Disclaimer
The material in this document has been prepared by Sungrow Australia Group Pty. Ltd. ABN 76
168 258 679 and is intended as a guideline to assist solar installers for troubleshooting. It is not a
statement or advice on any of the Electrical or Solar Industry standards or guidelines. Please
observe all OH&S regulations when working on Sungrow equipment.
The commissioning phase of the SH5K-20 inverter is straight forward and simple. All
settings are done from the front panel, and there is no longer any need to manually
enter the battery details –the system will automatically detect a powered-up battery.
On first initialisation, the flowing will appear on the LCD screen.
Enter to set/check the country code
Enter “AU” for AS/NZS 4777 as default
Select appropriate DNSP, or manually enter
grid protection parameters (Default DNSP power factor settings will be loaded)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 2 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter to save
Check / set time and date as required
Incorrect time setting will affect monitoring
Setting the Zero Export
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 3 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
‘ON’ = No power exported. “OFF” = All power
exported. “PARTIAL” = set by watts
Default = Partial 5000 watts
Set Reactive power if required. Note: Grid
settings already have State requirements loaded when DNSP selected.
Set if required
Set battery discharge times (only available if
battery connected)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 4 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Weekday and weekend time zones available
Generally, only set if customer is on TOU
metering. Otherwise leave as default.
EPS (Off-Grid) setting only if EPS box
connected and maximum 3 kW output under EPS mode.
Enable and enter
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 5 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter to save
Enter to test Earth Fault alarm
Enter to save and exit
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 6 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
There are a couple of subsequent settings that may be required depending on the
configuration.
If there is an existing PV system on the same phase, it must be enabled in the settings
otherwise some errors (error 084) may occur. This also allows battery charging from
existing system.
Enter
Password = 111 (Enter)
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 7 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Enter ‘Existing System’
Enable and enter
Enter the AC power of the total inverters on
the same phase only (you can also change the export limit here)
Enter to save
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 8 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
There may also be a requirement from the customer to reserve a set amount of battery
capacityto be available in the eventof a blackout. This willquarantine a pre-set amount
and will take that amount out of the daily cycle capacity. This is only available after
inverter has restarted with battery set.
Enter into settings
Password = 111
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 9 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
EPS setting
Enable
Enter to confirm
Enter desired value, based on a calculation
of total capacity, load, and how long backup is required for.
Enter to save and finish.
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
GD_201904_SH5K-20_Quick Commissioning Guide_V1.0 Page 10 of 10
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
Once the commissioning is completed, please follow the below checklists to test the
system.
1. The inverter only shows green light ON and status shows Running; if the
existing solar power is sufficient, the system should charge the battery.
2. Turn more house load ON to see whether the battery discharges.
3. If the EPS box (or backup) is installed, turn off the grid supply main to test
the Off-grid function; if the function is OK and then turn the grid supply main
to ON.
4. After completing these testing, the system should run OK.
For any assistance, please contact Sungrow Service Department on 1800 786 476.
Andere Handbücher für SH5K-20
3
Andere Sungrow Wechselrichter Handbücher
Sungrow
Sungrow SG250HX-IN-20 Bedienungsanleitung
Sungrow
Sungrow SG350HX-US Bedienungsanleitung
Sungrow
Sungrow SG75CX-P2 Bedienungsanleitung
Sungrow
Sungrow SG25CX-SA Bedienungsanleitung
Sungrow
Sungrow SG3.0RT Bedienungsanleitung
Sungrow
Sungrow SG1250UD Bedienungsanleitung
Sungrow
Sungrow SG3.0RT Bedienungsanleitung
Sungrow
Sungrow SG5KTL-MT Bedienungsanleitung
Sungrow
Sungrow SG80KTL Bedienungsanleitung
Sungrow
Sungrow SG80KTL Bedienungsanleitung
Sungrow
Sungrow SG30CX-NI Bedienungsanleitung
Sungrow
Sungrow SG2K5-S Bedienungsanleitung
Sungrow
Sungrow SG36CX-US Bedienungsanleitung
Sungrow
Sungrow SG30KTL-M Bedienungsanleitung
Sungrow
Sungrow SG1100UD Series Benutzerhandbuch
Sungrow
Sungrow SG50KTL-M-20 Bedienungsanleitung
Sungrow
Sungrow SG125CX-P2 Bedienungsanleitung
Sungrow
Sungrow SG4K6TL-M Bedienungsanleitung
Sungrow
Sungrow SG30CX Bedienungsanleitung
Sungrow
Sungrow SG30CX Bedienungsanleitung
