Sunix SDC4880B Bedienungsanleitung

__________________________________________________________________________________

PCI Express Industrial I/O Control Board

User’s Manual

No part of this publication may be reproduced, transcribed, stored in a retrieval

system, translated into any language, or transmitted in any from or by any

means, photocopying, manual, or otherwise, without prior written permission

from SUNIX.

Disclaimer

SUNIX shall not be liable for any incidental or consequential damages

resulting from the performance or use of this equipment.

SUNIX makes no representations or warranties regarding the contents of this

manual. Information in this manual has been carefully checked for reliability;

however, no guarantee is given as to the correctness of this content. In the

interest of continued product improvement, this company reserves the right to

revise the manual or include change in the specifications of the product

described within it at any time without notice and without obligation to notify

any person of such revision or changes. The information contained in this

manual is provided for general use by the customers.

Trademarks

SUNIX is a registered trademark of SUNIX Group.

All other trademarks or registered marks in this manual belong to their

respective owners.

Safety Information

1. Keep this User’s Manual for future reference.

2. Always read the safety information carefully.

3. Keep this equipment away from direct sunlight, or in humid or damp places.

4. Do not place this equipment in an unstable position, or on vibrating surface

before setting it up.

5. Do not use or place this equipment near magnetic fields, televisions, or

radios to avoid electronic interface that affects device performance.

__________________________________________________________________________________

Regulatory Compliance

FCC Conditions

This equipment has been tested and found to comply with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This equipment may not cause harmful interference

(2) This equipment must accept any interference received, including

interference that may cause undesired operation.

Important! Changes or modifications not expressly approved by the

manufacturer responsible for compliance could void the user’s authority to

operate the equipment. Use an approved phone set.

This equipment is in compliance with the requirements of the following

regulations: EN 55032: CLASS B and EN55035

WEEE Information

For EU (European Union) member users: According to the WEEE (Waste

electrical and electronic equipment) Directive, do not dispose of this product

as household waste or commercial waste. Waste electrical and electronic

equipment should be appropriately collected and recycled as required by

practices established for your country. For information on recycling of this

product, please contact your local authorities, your household waste disposal

service or the shop where you purchased the product.

__________________________________________________________________________________

Table of Contents

1. INTRODUCTION..............................................................................4

1.1. Overview....................................................................................................5

1.2. Package Checklist ......................................................................................5

1.3. Product Features.........................................................................................5

1.4. Product Specifications ...............................................................................7

2. HARDWARE INSTALLATION....................................................10

2.1. Hardware Appearance..............................................................................10

2.2. Hardware Installation............................................................................... 11

2.3. Connector Installation.............................................................................. 11

2.4. Pin Assignment ........................................................................................14

3. DRIVER AND SOFTWARE INSTALLATION ..........................16

3.1. Windows Driver and software Installation ..............................................16

3.2. Windows Driver Verify Installation ........................................................20

3.3. Windows Driver Uninstallation ...............................................................21

4. SOFTWARE OPERATION ...........................................................22

4.1. Overview..................................................................................................23

4.2. Configure Digital Input interface.............................................................25

4.3. Configure Digital Output interface ..........................................................30

4.4. Configure Serial Interface (SDC4880B only)..........................................32

4.5. Firmware Upgrade ...................................................................................35

5. HOW TO USE DLL LIBRARY IN C, C++ ..................................37

6. APPENDIX .......................................................................................42

6.1. Technology Topics...................................................................................42

6.2. Customer Service Information.................................................................44

__________________________________________________________________________________

1. Introduction

______________________________________________

SUNIX industrial PCI Express I/O Control Board, is designed to meet PCI

Express Base Specification Ver2.1. It can be installed in virtually any available

PC system and compatible with all major Windows and Linux operating

systems.

This board offers independent Digital I/O and RS-232/422/485 ports for

connecting kinds of serial terminals on the PC based systems. This board is

industrial standard which offers a reliable and high performance solution for

industrial applications.

The following topics covered in this chapter:

1.1 Overview

1.2 Package Checklist

1.3 Product Features

1.4 Product Specifications

__________________________________________________________________________________

1.1.Overview

SUNIX SDC4880B, industrial RS-232/422/485 and isolated Digital I/O

PCI-Express add-on card, is designed for PC-based IoT Gateway or desktop

that enables data acquisition, I/O control and serial communication in the

industrial automation. This board built-in SUNIX UART & Digital-I/O controller,

QiuNiu, and as well built with many of SUNIX advanced features and

technologies. In addition, SUNIX provides API software and SDK library,

allowing users to program under Windows 10 operating systems. The software

package includes a dynamic library.dll, as well as C, C# programming

language sample codes, making it easier to develop application software.

SUNIX PCI Express Industrial I/O Control Board enriches I/O expandable

capacity with cost-efficient design; SDC4880B is the best serial and digital I/O

communicating solution and SDC0880I is the best digital I/O communicating

solution to enrich your system I/O expandable capacity for lite industrial

applications.

1.2.Package Checklist

Please check if the following items are present and in good condition upon

opening your package. Contact your vendor if any item is damaged or missing.

PCI Express Industrial I/O Control Board (SDC4880B or SDC0880I)

DB44 to 2-port DB9 Male & 1-port DB25 Female connection cable, 100cm

(SDC4880B only)

DB25 Male to Female connection cable, 100cm (SDC0880I only)

Serial RS-232 D-Sub 9-pin male with nuts on cable, 30cm, 2pcs

(SDC4880B only)

DB25 Male DIN-rail wiring board

User's Manual (This document)

1.3.Product Features

Designed to meet PCI Express Base Specification Revision 2.1.

With high reliable SUNIX QiuNiu UART & Digital-I/O controller.

__________________________________________________________________________________

Plug-n-Play, I/O address and IRQ assigned by system.

Ultra low power consumption (<1.5W) design for green environment and

industrial application.

High quality electronic components, low impedance and high stability

ensure product quality and reliability.

Support Microsoft Windows 10 with C and C# programming language

sample code.

Certified by CE, FCC, RoHS, and Microsoft approvals.

Support both standard and Low profile bracket design to meet various of

PC chassis.

Serial Interfaces: (SDC4880B only)

Expands internal two (2) ports RS-232/422/485 and external two (2) ports

RS-232/422/485.

Utilize 16C950 UART and on-chip 128-bytes hardware FIFO for reliable,

high-speed serial communication.

RS-232/422/485 interface and 120Ωterminal resistor configured by

software.

On-chip hardware auto flow control to guarantee no data loss.

2KV surge protection for all serial signals meets IEC-61000-4-5.

Digital I/O Interfaces:

Expands isolated eight (8) digital input channels with features for all

channels.

- Support both NPN & PNP devices

- Support both dry and wet contact connections

- With digital filter for noise reduction

- Built-in 32-bit counter for all digital in channels

Expands isolated eight (8) NPN type digital output channels with initial

value (Booting & Restart) protection.

Each channel built-in 2.5KV isolation protection for signal and power,

allowing the input signals to be completely floated so as to prevent ground

loops.

__________________________________________________________________________________

1.4.Product Specifications

Board Level

Serial Ports (SDC4880B only)

Interface PCI Express

Controller SUNIX QiuNiu

BUS PCI Express Gen1 x 1 (single Lane)

IRQ & IO Assigned by System

ESD Protection ±15KV IEC61000-4-2 Air Gap Discharge

±8KV IEC61000-4-2 Contact Discharge

Interface RS-232/422/485 No. of Port 4 ports

Controller 16C950 UART Compatible Data bit 5, 6, 7, 8

FIFO 128byte Hardware Parity even, odd, none, mark, space

Baud rate 50bps ~921.6Kbps Flow

Control

RS-232:CTS/RTS(H/W),

DTR/DSR(HW), Xon/Xoff(S/W)

RS-422/485: Xon/Xoff(S/W)

Terminator 120ΩIRQ & IO Assigned by System

Surge Protection 2KV Surge IEC61000-4-5

Signal

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI

RS-422: TxD+, TxD-, RxD+, RxD-, GND

RS-485: Data+, Data-, GND

PCB Connector 2 ports on DB44 Female connector ; 2 ports on pitch 1.0 pin header connectors

__________________________________________________________________________________

Digital Input

Digital Output

Software Support

Declaration

Regulatory

Type NPN & PNP Channel 8-channel

Dry Contact Logic Level 0: Open;

Logic Level 1: Close to GND

Wet

Contact

Logic Level 0: 0 to 3VDC;

Logic Level 1: 10 to 50VDC

Input Resistance 10KΩIsolation 2500 VDC

Counter 32-bit counter on all channel Frequency Input Range 2KHz max.

Digital Filter Digital filter for noise

reduction Pin Define DI1~DI8, COM, GND

Interrupt Mode Event trigger (Rising Edge, Falling Edge, Both modes) & polling for all channels

PCB Connector DB44 Female connector for SDC4880B

DB25 Female connector for SDC0880I

Type NPN Channel 8-channel

Voltage Range 3.5 to 40VDC Current 500mA per Channel

Isolation 2500 VDC Pin Define DO1~DO8, PWR, GND

Initial Protection Initial Value Setup (Booting & Restart protection)

PCB Connector

DB44 Female connector for SDC4880B

DB25 Female connector for SDC0880I

Microsoft Windows 10 (X86/X64)

SDK Library: DLL for Windows supporting C, C++, C# languages.

C, C# sample code available

Green Product RoHS, WEEE

Hardware CE / FCC / VCCI / BSMI

__________________________________________________________________________________

Environment

Dimension

Operation Temperature -20 to 70°C (-4 to 158°F)

Operation Humidity 5 to 95% (non-condensing)

Storage Temperature -20 to 70°C (-4 to 158°F)

SDC4880B 146 x 68.5 mm

Bracket Standard 121 mm / Low Profile 79.2mm

Bracket Space 1

SDC0880I 84.44 x 68.5 mm

Bracket Standard 121 mm / Low Profile 79.2mm

Bracket Space 1

__________________________________________________________________________________

2. Hardware Installation

______________________________________________

This chapter includes information about hardware installation of SUNIX PCI

Express Industrial I/O Control Board, connectors and cables, pin assignment

of hardware interfaces, and digital input/out settings.

The following topics covered in this chapter:

2.1 Hardware Appearance

2.2 Hardware Installation

2.3 Connector Installation

2.4 Pin Assignments

2.1.Hardware Appearance

PCI Express Industrial I/O Control Board appearance shown as below.

SDC4880B

SDC0880I

Andere Handbücher für SDC4880B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunix Computerhardware Handbücher

Sunix

Sunix Universal PCI ExpressMulti-IORS-232 / ParallelCommunication... Bedienungsanleitung

Sunix

Sunix IPC-M2204S Bedienungsanleitung

Sunix

Sunix Universal PCI ExpressMulti-IORS-232 / ParallelCommunication... Bedienungsanleitung

Sunix

Sunix Universal PCI Express Multi-IO RS-232/Parallel Communication... Bedienungsanleitung

Sunix

Sunix USB2321C Bedienungsanleitung

Sunix

Sunix LAN1425 Bedienungsanleitung

Sunix

Sunix PC104 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung