Sunix Powered USB HUB Bedienungsanleitung
User’s Manual
Powered USB HUB
First Edition, October 2008
Version 1.0
Powered USB Hub
User’s Manual
Copyright
Copyright© 2005 SUNIX Co., Ltd. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a
retrieval system, translated into any language, or transmitted in any from or
by any means, photocopying, manual, or otherwise, without prior written
permission from SUNIX Co., Ltd.
Disclaimer
SUNIX Co., Ltd. shall not be liable for any incidental or consequential
damages resulting from the performance or use of this equipment.
SUNIX Co., Ltd. makes no representations or warranties regarding the
contents of this manual. Information in this manual has been carefully
checked for reliability; however, no guarantee is given as to the correctness
of this content. In the interest of continued product improvement, this
company reserves the right to revise the manual or include change in the
specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or changes. The
information contained in this manual is provided for general use by the
customers.
Trademarks
SUNIX is a registered trademark of SUNIX Co., Ltd.
Other registered marks used herein are for identification purposes only and
may be trademarks of their respective owners.
771-POWHUB000-001
- 1 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
INDEX
Chapter 1 Introduction.............................................................................2
Overview ...........................................................................................3
Package Checklist ........................................................................... 4
Product Features.............................................................................. 5
Product Specifications ..................................................................... 5
Chapter 2 Hardware Installation..............................................................7
Hardware Installation........................................................................ 8
Pin Assignment……..…………………………................................ 15
Mechanical Drawings..…………………………………………………16
Chapter 3 Powered USB Hub Operation ..............................................17
Driver Installation……..................................................................... 18
Verify Powered USB Hub in System…...…..…............................... 18
Powered USB Hub Operation……………….…............................... 19
Chapter 4 Troubleshooting……………..................................................20
Troubleshooting……....................................................................... 21
Chapter 5 Appendix…………………………............................................24
Core Technologies………............................................................... 25
Contract Information…….…............................................................ 27
- 2 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
1.
Introduction
Thank you for purchasing the Powered USB High Speed Hub, which is
designed to enable users accessing USB devices without additional external
power supply connection. SUNIX 4-Port Powered USB 2.0 High Speed Hub
provides a simple and affordable way to add up to four 2.0 compliant
Powered USB ports to your PC. With this plug and play upgrade, it is easy to
connect POS peripherals which require more than the normal power provided
by a standard USB connection, thus eliminating the need for cumbersome
power supply bricks. In addition, SUNIX Powered USB Hub is backward
compatible to regular USB 1.1 and USB 2.0 devices.
The following topics are covered in this chapter:
Overview
Package Checklist
Product Features
Product Specifications
- 3 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Overview
USB allows peripheral devices to exchange data with a PC and also to receive
power over the USB bus. Unfortunately, the bus supplied power is limit to 2.5
Watts (0.5A @ +5V) per port, sufficient to provide enough power to input
devices, web cameras among other low power devices. Other devices like
printer, displays, pin pads, external CD-ROM and hard drives still require an
external power supply. Here comes Powered USB, it eliminates the need for
additional power supplies. Powered USB provides the necessary power as
well as the communication signals over a hot pluggable cable. In addition, the
Powered USB solves the physical host side cable locking problem associated
with the standard USB connector by providing a host cable locking
mechanism.
SUNIX Powered USB High Speed Hub provides a convenient and affordable
way to add up to 4 Powered USB 2.0 ports on your PC. Devices which require
more power than provided by the regular USB interface can be easily installed
and used with no need for an additional power supply. SUNIX PUB1300H
Powered USB Hub provides both +12V and +24VDC through the power
adapter directly to its 4 Powered USB ports. Besides it is also backward
compatible to regular USB 1.1 and USB 2.0 devices.
POS systems become more and more stylish now days, with limited space for
the terminal and all peripherals inside. Safe your valuable space and get rid of
the peripherals’ power supplies using the Powered USB Hub. This product is
the ideal solution for today’s point of service systems.
- 4 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Package Checklist
Please check if the following items are present and in good condition upon
opening your package. Contact your vendor if any item is damaged or
missing.
1. Powered USB Hub
2. User's Manual (This document)
3. Clamped USB2.0 High Speed Cable (1pcs)
4. Power Adapter with 6-pin Mini-Din Connector Type: (out “ – “ , inside “ + “)
+24VDC @ 2A (1pcs)
+12VDC @ 4A (1pcs)
5. Power Cord (2pcs)
Optional Accessory:
1.Wall-MountKit 2.Din-RailKit
Note:
Optional accessory does not include in the standard packing. If any
accessory requests, please contact your vendor for detail
- 5 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Product Features
Compliance with Universal Serial Bus (USB) Specification Revision 2.0
High performance NEC USB2.0 Hub controller on board.
Add 4 external Powered USB ports on your PC.
Powered USB port supports +24VDC and +12VDC power output.
Each PoweredUSB ports built-in short circuit and over current protection.
External LED indicates system status and power output.
Support USB peripheral power control by stand-by and wakeup
commands.
Built-in USB panel mount design to avoid USB cable comes off problem.
Rugged and slim aluminum chassis design meets IP30 standard.
Optional accessory for easy DIN-Rail and Wall-Mounting ability.
Supports USB device Hot-Swapping and Plug-n-Play function.
Certified by RoHS CE, FCC Class B approval.
Support Linux, MAC, and Microsoft Windows 9x, 2000, XP, 2003 Vista,
2008 (X86/X64) operation system.
Product Specifications
USB Communication
Interface Universal Serial Bus 2.0
Controller NEC UPD720104
IRQ & IO Assigned by System
Speed Data Transfer rate of 1.5, 12, and 480Mbps
External
Powered USB Port +24VDC / 1-port / Maximum 2A
+12VDC / 3-port / Maximum 4A
Protection +24VDC USB port built in 3A PTC fuse
+12VDC USB port built in 1.55A PTC fuse
Board Connector Powered USB Connector
- 6 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Power Input
Power Consumption 150mA @ 5VDC (Non-Loading)
Power Input +24VDC / 2A / 48W (From Power Adapter)
+12VDC / 4A / 48W (From Power Adapter)
+5VDC / 0.5A / 2.5W (From USB Bus Power)
Microsoft Server NT/2003/2008 (X86/X64)
Linux Linux 2.4.x / 2.6.x
MAC Version 10.2 or later
Driver Support
Microsoft Windows 95/98/ME/2000/XP/Vista (X86/X64)
Microsoft Embedded CE5.0/XP Embedded
Microsoft Server 2003/2008 (X86/X64)
Linux Linux 2.4.x / 2.6.x
MAC MAC Version 10.2 or later
Regulatory Approvals
Hardware EN55022 Class B, EN55024, EN61000-3-2,
EN61000-3-3, FCC Part 15 Class B,
Green RoHS
Operation Environment
Operation
Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)
Mechanical
Dimension 110 x 70 mm
Enclosure IP30 standard
Material Aluminum and Polycarbonate (PC)
Gross Weight 165 gram (5.82 ounce)
Mounting DIN Rail and Wall Mount Kit (Optional Accessory)
- 7 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
2.
Hardware Installation
This chapter includes information about hardware installation and mechanical
drawings for Powered USB High Speed Hub. The following topics are covered:
Hardware Installation
Pin Assignments
- 8 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Hardware Installation
LED Display
Name LED ACT Description
Green USB connection between computer and Hub is ready
LINK Do NOT Light USB connection between computer and Hub is NOT ready
Green USB data is communicating between Powered USB device, Hub,
and computer.
ACT Do NOT Light There’s no any data communication between computer and Hub
Green 12 or 24VDC power outputs to Powered USB device.
PWR Do NOT Light There’s no any power output to Powered USB device.
Earth Ground Connection
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). In order to reduce the environmental
background noise, we have added earth ground cooper on the Hub side
panel. User can run the ground connection from the Hub ground screw to the
grounding surface.
+12V +12V +12V +24V
Power Output
LED
USB Data Link
LED
Earth Ground Screw Pin
Inhaltsverzeichnis
Andere Sunix Schalten Handbücher
