Origin of Country: China 4 / 12
Inspect the gas connections of the appliance prior to each use. Do not to operate the unit if there is a gas leak. Have the
appliance inspected annually by a qualified service person.
The pressure regulator and hose assembly provided with the appliance must be used. The replacement part must be
the same as the part specified by manufacturer.
The assembly of LP-gas and leak checking, please refer to the “Gas connection” on page 8 and “leak Test” on page 9.
Children and adults should be alerted to the hazards of high surface temperatures and should stay away to
avoid burns or prevent clothing ignition.
Young children and pets should be carefully supervised when they are in the area of the appliance.
Any guard or other protective device removed for servicing the appliance must be replaced prior to operation.
Clothing or other flammable materials should not be hung from the appliance.
Do not use the appliance if any part has been under water. Immediately call a qualified technician to inspect the
appliance and to replace any part of the control system and any gas control which has been under water.
LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for LP-gas
cylinders of the U.S. Department of Transportation (DOT).
The cylinder supplies system must be arranged for vapor withdrawal and the cylinder must include a collar to protect
the cylinder valve.
Use only 20 lb / 9 kg LP-Gas cylinders.
Do not burn wood or any other materials in this appliance.
The appliance must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure testing of
the gas supply piping system at test pressure equal to or less than 1/2psi (3.5kPa).
Properly place the hose out of pathways where people may trip over it or in areas
where there may be subject to accidental damage.
The burner must be replaced prior to the appliance being put into operation if it is evident that the burner is damaged.
The replacement burner must be the same as the part specified by manufacturer.
The cleaning of the appliance including the burner, please refer to “Clean and Maintenance” on page 12.
