Sunjoy D-GZ846PCO-J Bedienungsanleitung



IMPORTANT

Thank you very much for choosing Sunjoy Group.

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy

operation. Keep this manual for future reference.

We would like to hear from you with any comments or suggestions. You can call us toll-free at

1-866-578-6569 from 8:00 a.m. EST to 8:00 p.m. PST. You can also send the email to

[email protected] or visit www.sunjoyonline.com to get tech. assistance or to place your

replacement part order form.

Sunjoy D-GZ846PCO-J 14’x14’ Younge Round Gazebo

- Black Top

Owner’s Manual

Cautions:

1. Keep all children and pets away from assembly area. Children and pets should be supervised when

they are in the area of pavilion construction.

2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage,

house, over hanging branches, laundry line or electrical wires.

3. The unit is heavy. Do not assemble alone. Eight people are recommended for safe assembly.

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.

5. When assembling and using this product, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment. Please read all instructions before

assembly and use.

6. For outdoor use only. Install on level ground. Stakes are provided to secure the pavilion in the

ground. If you wish to secure the pavilion to a wood deck or concrete surface, you will need to

purchase fasteners appropriate for these surfaces. These are readily available at your local hardware

store or home center.

7. Check all bolts for tightness before and during usage. Do not cook inside the tent.

8. Please check your state and local regulations prior to purchasing. Some jurisdictions may require

permits for, or otherwise regulate, installation and use.

9. While this pavilion is manufactured to withstand gale force winds utilizing only the supplied ground

stakes, in areas subject to frequent severe weather, securing the pavilion to a deck, concrete patio or

footings should be considered.

10. Your pavilion has been engineered to accommodate winter snow loads incurred in most areas.

Removal of accumulated snow on the pavilion roof with a roof rake is recommended. In areas that are

regularly subject to blizzard conditions however, removal of the roof panel is suggested. The

assembled roof structure can simply be left intact until warmer conditions return

Assembly Instructions:

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish.

Inside this carton you will find enclosed hardware and parts listed above. Please check the contents

of this package to ensure you have received all of the required parts, and that there is no breakage.

All you will need is a screwdriver, a hammer and two ladders of at least 8 feet (2.5 m) high (not

included).

Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in

which the part is used.



Description No. Qty Picture

Post A8



Base B8



Arch Support C8



Decorative Groove D8



Connector E8



Oblique Beam 1F8

Oblique Beam 2G8

Apron Piece H16

Inner Baffle I8



Small Roof Frame J8



Small Roof Crosspiece

Spot K8

Small Roof Oblique

Beam L8



Small Roof Connector M1



Big Roof Cover Plate N16



Small Roof Cover

Plate O8



Cover Presser P16



Small Roof Cover Q1

Parts List



Hook R1

Finial S1



Netting and Curtain

Rods Connecting 1 T18

Netting and Curtain

Rods Connecting 2 T28

Netting and Curtain

Rods Connecting 3 T38

Netting and Curtain

Rods U32

AAM6x20HexBolt64PCS

BBM6FlatWasher112PCS

DDM6x15CrossBolt16PCS



EEM6x35HexBolt16PCS



GGM6Nut16PCS



WM6Wrench2PCS

Hardware Pack 1







Fig.1: Attach Base (B) to Post

(A) by Bolt (AA) and Flat

Washer (BB). Lock tightly.

HardwarePack2

BBM6FlatWasher232PCS

AAM6x20Bolt16PCS



CCM6x15Bolt136PCS



DDM6x15CrossBolt32PCS



EEM6x35HexBolt16PCS



FFM6x55HexBolt8PCS



GGM6Nut24PCS



IIPlasticCover48PCS



Fig.3: Insert another part of Decoration

Gutter Connector (D) into assembled

Decoration Gutter Connector, then use

Bolt (AA) and Flat Washer (BB) to lock

Decoration Gutter Connector (D) and

Post (A) tightly.

Fig.2: Attach Decoration Gutter

Connector (D) to Post (A) by Bolt

(AA) and Flat Washer (BB). Don’t

lock tight.

Fig.5: Attach Cover (E) to Decoration

Gutter Connector (D) by use Screw (DD)

and Flat Washer (BB). Lock them tight.

Fig.4: Attach Decoration Gutter Connector (D)

to the outer connect plate together by use Bolt

(EE), Flat Washer (BB) and Nut (GG). Lock

them tightly.



Fig.6-2: There need 2 person to lift the assembled

Big Roof Frame (J) and need 1 more person to

assemble Oblique Beam 1 & 2(F&G).

Fig.6-1: Connect Big Roof Frame (J) by Bolt (EE),

Flat Washer (BB) and Nut (GG). Lock tightly.



Fig.9: Attach Lock Oblique Beam 1

(F) to Big Roof Frame (J) and lock

them tightly by Bolt (CC) and Flat

Washer (BB).

Fig.11: Attach Oblique beam 2

(G) to Decoration Gutter (D)

and lock them tightly by Bolt

(CC) and Flat Washer (BB).

Fig.10: Attach Lock Oblique

Beam 2 (G) to Big Roof Frame (J)

and lock them tightly by Bolt (CC)

and Flat Washer (BB).

Fig.8: Attach Oblique Beam 1(F) to

Post (A) and lock them tightly by

Bolt (CC) and Flat Washer (BB).

Fig.12: Attach Big Roof Beam (H)

to Oblique Beam 1&2 (F&G) and

lock them tightly by Screw (DD)

and Flat Washer (BB).

Fig.7: Connect Oblique Beam 1

(F) and Decoration Gutter (D) by

Bolt (CC) and Flat Washer (BB).







Fig.13: Lock Small Roof Inclined

Beam (L) and Big Roof Frame (J)

tightly by Bolt (CC) and Flat

Washer (BB). Dot lock tight.

Fig.14: Attach Small Roof Connector (M) to Small Roof Inclined Beam

(L) and lock them tightly by Screw (FF), Flat Washer (BB) and Nut

(GG). Screw Hook (R) on Small Roof Connector (M).

After complete this step, then fasten all bolts on Fig 13 & Fig 14.

Fig.15: Fix Small Roof Baffe

(K) as shown above. Lock them

tightly by Bolt (CC) and Flat

Washer (BB).



Fig.16: Attach Small Roof

Inclined Beam (L) to Small Roof

Baffe(K) and lock them tightly by

Bolt (CC) and Flat Washer (BB).

Fig.17: Insert Arc Support Bar (C) to

the ecoration ring of Post (A), lock

them tightly by use Bolt (CC), Flat

Washer (BB). Then use Plastic

Cover(II) to cover the Bolt (CC).

Fig.18: Lock Netting and Curtain Rods

Connecting 1 (T1) and Arch support (C) to

Decoration Gutter (D) by using Bolt (AA),

Flat Washer (BB). Then use Plastic Cover

(II) to cover the Bolt (AA).

Fig.19: Fix Inner baffle (I), Netting and Curtain Rods

Connecting 2&3 (T2&T3) and Decoration Gutter (D)

together by using Bolt (CC) and Flat Washer (BB).

Then use Plastic Cover (II) to cover the Bolt (CC).



HardwarePack3

BBM6FlatWasher40PCS

DDM6x15CrossBolt40PCS



HHΦ8x260 Stake16PCS

Fig.22: Attach Small Roof

Cover (Q), Finial (S) and Small

Roof Connector (M) together as

shown above.



Fig.20: Connect two Small

Roof Sheet (O) in order as

shown in above and insert the

last Small Roof Sheet into the

slot of first Small Roof Sheet.

Fig.21: Lock Small Roof Sheet

(O) to Small roof crosspiece

spot (K) by using Bolt (DD) and

Flat Washer (BB).



Fig.24: Connect two Big Roof

Sheet (N) in order as shown

above. And insert the last Big

Roof Sheet into the slot of first

Big Roof Sheet.

Fig.25: Fix Big Roof Sheet (N) by Cover

Presser (P). Then lock Cover Presser

(P) with Decoration Gutter (D) tightly by

Screw (DD) and Flat Washer (BB).

Fig.23: Insert one side of Big

Roof Sheet (N) under Big Roof

Frame(J).

AAM6x20HexBolt4PCS

BBM6FlatWasher12PCS

CCM6x15HexBolt8PCS



DDM6x15CrossBolt5PCS



EEM6x35HexBolt2PCS



FFM6x55CrossBolt1PCS



GGM6Nut2PCS



IIPlasticCover4PCS



Back up Hardware

Fig.26: Fix the gazebo on the groud by Stake (HH).

Fig.27: Insert one end of the Netting and Curtain Rods (U) which has snap hook hole into Netting and

Curtain Rods connecting 2 (T2), make sure it is insert totally. (The same way to insert Netting and

Curtain Rods connecting 3 (T3) with Netting and Curtain Rods (U).)

Fig.28: Counter pull the inserted Netting and Curtain Rods (U) to the snap hook fix area, then make it’s

another side insert into Netting and Curtain Rods connecting 1 (T1) .

Care & Maintenance:

Our steel components for garden accessories and furniture are treated with rust inhibiting paint that

protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once

these protective coatings are scratched. This is not a defect and thus not covered by the warranty.

To minimize this condition, we recommend care when assembling & handling the product to prevent

scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up

with rust inhibiting paint.

Surface rust can also be easily removed with a very light application of common cooking oil. If surface

oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping

on to deck or patio and caused damaging stains, which may be difficult to remove. This can be

prevented if the above-mentioned measures are taken to keep the product from oxidizing.

Limited Manufacturer’s Warranty:

This limited warranty is extended to the original purchaser and applies to defects in materials and

workmanship of your item provided the item is maintained with care and used only for personal,

residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of one (1) year.

We don't reimburse for transportation or delivery costs, or compensate the individual or any outside

party for assembling or disassembling the product.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts

of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware

is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is

to the original purchaser and is non-transferable. Any replacement of warranted items will be in the

original style and color, or a similar style and color if the original is unavailable or has been

discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above

exclusions and limitations may not apply. This warranty gives you specific rights, and you may also

have other rights, which vary from state to state.

Made in China

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy A111005700 Bedienungsanleitung

Sunjoy

Sunjoy SummerCove A102012121 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ025PCO-7A Bedienungsanleitung

Sunjoy

Sunjoy A102007260 Bedienungsanleitung

Sunjoy

Sunjoy L-BG011PST-1 Bedienungsanleitung

Sunjoy

Sunjoy A106005460 Bedienungsanleitung

Sunjoy

Sunjoy 810326090 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ815PST Bedienungsanleitung

Sunjoy

Sunjoy D-SC002PAL Bedienungsanleitung

Sunjoy

Sunjoy D-GZ238PST-11K Bedienungsanleitung

Sunjoy

Sunjoy D-GZ136PST-N Bedienungsanleitung

Sunjoy

Sunjoy A101003202 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ209PST-H Bedienungsanleitung

Sunjoy

Sunjoy Essential Garden L-GZ454PST Bedienungsanleitung

Sunjoy

Sunjoy Ashdale L-GZ137PST-1 Bedienungsanleitung

Sunjoy

Sunjoy A215002900 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ815PST-1-MN Bedienungsanleitung

Sunjoy

Sunjoy A102007200 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ937PST-C Bedienungsanleitung

Sunjoy

Sunjoy Sienna Gazebo L-GZ240PST-A Bedienungsanleitung

Sunjoy

Sunjoy A110000920 Beilage

Sunjoy

Sunjoy Tivoli L-GZ105PST-4 Bedienungsanleitung

Sunjoy

Sunjoy A101011400 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ098PST-1A Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung