Sunjoy L-GZ1048PCO-A Bedienungsanleitung

For technical assistance or replacement parts, please contact Sunjoy Group at 1(866) 578-6569 anytime

24 hour / 7 days a week or Email [email protected] or visit www.sunjoyonline.com to place your order

or fax your parts replacement order form together with your purchase receipt to 1 (740) 283-3549 for

assistance.

Note: THIS UNIT IS HEAVY!

Do NOT assemble this item alone for safety. Six people are necessary.

You will need a screwdriver, hammer and two 8ft ladders.

While this screen house is manufactured to withstand winds through only the supplied ground stakes, in

areas subject to frequent severe weather, securing the screen house to a deck, concrete patio or footings

should be considered.

Snow must be cleared off regularly during snowy days. Remove the snow at the top when it is thicker than

4 inches. In order to avoid damage, use a plastic snow rake to remove excessive snow and ice buildup from

roof and keep away from falling debris.

Country of Origin: China Production Number: 20193442

Assembly Instructions

Bar Harbor 10x12 Screen House

Article # 182996

Parts List

J1 (x2) Long left decorative

slot K1 (x2) Long side right

decorative slot

L1(X2) Short decorative slot M1(x2) Long side decorative

slot connector

F1(x4) Short side decorative

slot connector N1(X4) Corner connector

H1(x4) Long side netting

tube I1(x4) Shot side netting

tube

K2(x4) Top slanting bar B2 (x1) Big top frame

L2 (x4) Middle beam M2 (x4) Long support beam of

big top long side

N2 (x4) Short support beam of

big top long side O2 (x4) Long support beam of

big top short side

P2 (x4) Short support beam of

big top short side A3(X2) Small top oblique

beam 1

B3(X4) Small top oblique

beam cover panel C3 (x2) Roof cover of small

top long side

D3 (x2) Roof cover of small

top short side E3 (x1) Small top lower

connector frame

F3(X2) Small top oblique

beam 2 K3 (x1) Small top connector

H3 (x1) Top cover of small top I3(x1) Top decor

L3(x1) Hook A4(X4) Post base

B4 (x4) Base protector C4(x4) Post

H4(x4) Top block F4(X4) Left support

G4(X4) Right support A5(x2) Big top long side left

cover panel

B5(x2) Big top long side right

cover panel C5(x4) Big top left middle

cover panel

D5(x4) Big top right middle

cover panel E5(x4) Big top left small

cover panel

Hardware Pack 1

AA Plastic end cap 16 PCS

BB M6 Bigger flat washer 48 PCS

CC M6*20 Hex bolt 48 PCS

OO M6 spring washer 32 PCS

JJ Metal hook 52 PCS

LL M6 Wrench 2 PCS

F5 (x4) Big top right small

cover panel G5 (x2) Big top short side

big cover panel

H5 (x4) Top cover I5 (x18) Roof press sheet

J5(x1) Netting

Fig.1-4: Fix slot (L1) on the L1 end of slot (J1, K1) using bolt (CC) ,spring washer (OO) and washer (BB).

Fig.2: Fix connector (N1) on the slot (J1) and slot (K1) using bolt (CC) ,spring washer (OO) and washer

(BB).

BB M6 Bigger flat washer 72 PCS

CC M6*20 bolt 72 PCS

Hardware Pack 2

Fig.3: Firstly stuff one end of the long netting tube (H1) using cap (AA), then fix hook (JJ) on the inner

side of long tube (H1).

Fix 7pc of hooks (JJ) on the long tube (H1) and 6pc of hooks (JJ) on the short tube (I1) and use cap

(AA) to stuff another side of the tube.

Fix the long tube (H1) on the left decorative slot (J1) and right decorative slot (K1) using bolt (CC)

and washer (BB).

Fix short tube (I1) on the left decorative slot (J1) and short decorative slot (L1),or on the right

decorative slot (K1) and short decorative slot (L1).

Fig.1-1:Fasten the decorative slot connector (M1) on the K1 side of decorative slot (J1) using bolt

(CC), spring washer (OO) and washer (BB).

Fig.1-2: Fasten the decorative slot (J1,K1) tightly using bolt (CC), spring washer (BB) and washer

(BB). Insert J1 end of slot (K1) into the K1 end of slot (J1).

Fig.1-3: Fasten the slot connector (F1) on L1 end of the decorative slot (J1, K1) using bolt

(CC) ,spring washer (OO) and washer (BB).

Fig.4: Fix the top slanting bar (K2) onto the corner connector (N1) with bolt (CC) & washer (BB) .

Fig.5: Fix the oblique beam (K2) on the big top frame (B2) using bolt (CC) and washer (BB).

Fig.6: Fix the middle beam of big top (L2) onto big top frame (B2) with bolt (CC) & washer (BB).

Fig.7: Fix the Middle beam (L2) onto decorative slot (J1, K1,L1) with bolt (CC) & washer (BB).

Fig.8: Fix one end of the left long support beam of big top long side (M2) onto the middle beam of big top

(L2) with bolt (CC) & washer (BB).

Fig.9: Fix the other end of the long support beam (O2) onto the Top slanting bar (K2) with bolt (CC) &

washer (BB).Use the same way to assemble N2, O2, P2, and M2 respectively.

Fig.10: Fix the small top oblique beam (A3, F3) on the small top connector (K3) using bolt (KK) and

washer (BB). Fix hook (J3) from the bottom side of small top connector (K3) to upper side.

Fig.11: Fix the lower end of small top beam (A3, F3) on the small top lower connector frame (E3) using

bolt (CC) and washer (BB).

Hardware Pack 3

BB M6 Bigger flat washer 20 PCS

CC M6*20 Hex bolt 16 PCS

KK M6 Nut 4 PCS

Hardware Pack 4

BB M6 Bigger flat washer 76 PCS

CC M6*20 Bolt 76 PCS

OO M6 spring washer 56 PCS

HH Ф8*260 Peg 8 PCS

II Ф6*80 Anchor 16 PCS

Fig.12-1: Fix the assembled small top on the big top frame (B2) through small top lower connector

frame (E3),using bolt (CC) and washer (BB).

Fig.12-2: See as the pic. fold the small top long and short side cover panel (C3, D3) on the small top.

Fig.13-1: Fasten the small top cover panel (B3) on the small top oblique beam, and fix it using bolt

(CC) and washer (BB).

Fig.13-2: Firstly cover the small top cover (H3) on the bolt which is on the

small top hook, then fix the top decor (I3) on the bolt, and tighten the

small top cover (H3).

Fig.14: Lift the Base protector (B4), attach the post base (A4) to the post (C4) with bolt (CC) & washer (BB).

Fig.15: Fix the top block (H4) to the post (C4) with bolt (CC) & washer (BB).

(Note: the screw holes on the post and the screw holes which install the block plate (E4) should be in the same

direction as shown on drawing.)

Fig.16: Lift the assembled pavilion roof and fix the assembled post to the corner of the roof with bolt (CC), bolt

(OO) &washer (BB).

(Note: The screw holes on the post must be directed inward. 6 people are needed here.)

Fig.17: Fix the Corner connector (N1) to the top block (H4) with bolt (CC) ,bolt (OO) & washer (BB).

Fig.18: Fix the arc support bar (F4/G4) to the post (C4) & decorative beam with bolt (CC),bolt (OO) &

washer (BB).

Fig.19: Fix the screen house on the grass ground with the peg (HH).

Fig.20: Fix the screen house on the cement ground with the anchor (II).

Hardware Pack 5

Fig.21: See as the pic. buckle the cover panel (A5) on the right cover panel (B5). See the pic of big top cover

panel for reference, buckle cover panels from left to right.

Fig.22: See as the pic. fix the buckled cover panels(A5,B5) on the U type slot on the big top frame (B2). Same

method to the cover panel (G5).

Fig.23: Fasten the long side left cover panel (A5) and big top short side cover panel (G5) on the oblique beam

(K2) using bolt (CC) and washer (BB).

BB M6 Bigger flat washer 68 PCS

CC M6*20 Bolt 60 PCS

GG M6*40 Bolt 8 PCS

Fig.24: Fasten top cover panel (D5, C5) on the oblique beam (K2) using bolt (CC) and washer (BB).

Fig.25: Fasten top cover panel (F5, E5) on the oblique beam (K2) using bolt (CC) and washer (BB).

Fig.26: Fix the press sheet (I5) on the decorative slot (the place of 2 cover panels buckled), fix the cover

panel using bolt (DD) and washer (BB).

Fig.27: See as the pic. insert the pilot pin of oblique beam cover panel (H5) into the corner hole of big top

frame (B2).

Fig.28: Then fasten the big top oblique beam cover panel

(H5) on the oblique beam (K2) using bolt (GG) and

washer (BB).

Fig.29: Fix the netting (J5) on

the tube (H1) and tube (I1)

using the hook (JJ), make

the netting with bandlet

outward. Hook 7 pc fabric

buckles on the tube (H1) and

6 pc fabric buckles on the

tube (I1). See the pic. for

reference, assemble in a

clockwise sequence.

Now, your screen house is

ready for use.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy L-GZ702PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ098PST-1 Bedienungsanleitung

Sunjoy

Sunjoy 243333 Bedienungsanleitung

Sunjoy

Sunjoy A104000900 Bedienungsanleitung

Sunjoy

Sunjoy Newport L-GZ660PST-PK Bedienungsanleitung

Sunjoy

Sunjoy A1020073 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ007PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ519PST-C Bedienungsanleitung

Sunjoy

Sunjoy L-GZ240PST Bedienungsanleitung

Sunjoy

Sunjoy D-PB002PCO Bedienungsanleitung

Sunjoy

Sunjoy L-GG067PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ212PCO-B1 Bedienungsanleitung

Sunjoy

Sunjoy Kroger L-GZ407PST-2 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ076PST-1 Bedienungsanleitung

Sunjoy

Sunjoy 10'X10' OPP Gazebo L-GZ322PST Bedienungsanleitung

Sunjoy

Sunjoy Catalina L-GZ660PST-D-PK Bedienungsanleitung

Sunjoy

Sunjoy Sheridan L-GG040PST Bedienungsanleitung

Sunjoy

Sunjoy A102003701 Bedienungsanleitung

Sunjoy

Sunjoy Catalina L-GZ660PST-D-MN Bedienungsanleitung

Sunjoy

Sunjoy HAMPTON Bedienungsanleitung

Sunjoy

Sunjoy L-GG035PST Bedienungsanleitung

Sunjoy

Sunjoy A102007200 Bedienungsanleitung

Sunjoy

Sunjoy A106000520 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ238PST-11K Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung