Sunjoy L-GZ339PAL Bedienungsanleitung

Assembly Instructions

Aluminum Benen Gazebo

Item# L-GZ339PAL

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The

final product will be a quality piece that will go together smoothly and give years of enjoyment.

Tools Needed: Screwdriver & hammer & ladder (more than 2.5m) .

Item Identification: For ease of identification, all parts are labeled to correspond to the Step number in which

the part is used.

NOTE: We put the parts G, J, K, L into the Post (Q).

Long Beam (1) A 2

Long Beam (2) B 2

Short Beam (1) C 2

Short Beam (2) D 2

Beam connector E 4

Corner Connector F 4

Reinforcement Slat G 4

Corner mandril connector (1) H 2

Corner mandril connector (2) I 2

Long slanting bar J 4

Short mid top bar K 2

Long mid top bar L 2

Big top connector M 1

Small top connector N 1

Pothook O 1

Small top pole P 4

Post Q 4

Base Q1 4

Support bar R 8

Large canopy S 1

Small canopy T 1

Mosquito netting U 1

Wall V 1

Parts List

AA M6X15 bolt 64 PCS

BB M6 flat washer 64 PCS

DD Plastic Hook 144PCS

Hardware Pack 1

STEP 1

Fig.0: Install Plastic hook (DD) to the Beam A (B, C, D) as Fig.0 shows.

8pcs hooks and 10pcs hooks needed on each short beam and long beam

separately.

Fig.1: Connect Long beam (A&B) with Beam connector (E) by using bolt

(AA) and flat washer (BB). Connect short beam (C&D) with Beam

connector (E) in the same way.

Fig.2: Connect the long beams and the short beams with Corner

connector (F) by using bolt (AA) and flat washer (BB). Please block up the

whole beam frame to prevent the damage to the plastic hooks when

assemble. Make sure all snap buttons are in place.

Fig.3: Attach Reinforcement slat (G) to the corner of the beam frame with

bolt (AA) and flat washer (BB).

Fig.4: Install Corner mandril connector (I) on the top of the beam frame (A

& D) corner with bolt (AA) and flat washer (BB). Install Corner mandril

connector (H) on the top of the beam frame (B & C) corner in the same

way.

BB M6 flat washer 12 PCS

EE M6X35 bolt 8 PCS

FF M6 nut 8 PCS

W1 M6 wrench 1 PC

Hardware Pack 2

STEP 2

Fig.5: Install the Pothook (O) onto the Big top connector (M); then insert the Long slanting bar (J), Short mid top

bar (K) and Long mid top bar (L) into the Big top connector (M). (Here one person is needed to support the Top

connector M).

Fig.6: Insert the Long slanting bar (J) into the Corner mandril connector (H) & (I).

Fig.7: Install the Short (Long) mid top bar K (L) on the connector of the top of the beam frame with bolt (EE) and

flat washer (BB) and nut (FF).

Fig.8: Insert the Small top pole (P) into the Small top connector (N) as a small top.

Fig.9: Put the Large canopy (S) on the big top; do not spread it. Then install the assembled small top on the Long

slanting bar (J) with bolt (EE), flat washer (BB) and nut (FF). Place the Small canopy (T) on the small top and

tighten.

AA M6X15 bolt 12 PCS

BB M6 flat washer 44 PCS

GG M6X45 bolt 16 PCS

HH M6X25 bolt 16 PCS

II 8X180 peg 12 PCS

Hardware Pack 3

STEP 3

Fig.10: Connect Post (Q) and Base (Q1) with bolt (AA) and flat washer (BB).

Fig.11: Four people will be needed to lift the whole top while another attaches the Post (Q) with the bolt (GG)

and flat washer (BB). (Note: 5 people are needed.)

Fig.12: Fix one end of support bar (R) on post (Q) and another end on the Long (Short) beam with bolt (HH)

and flat washer (BB). Then spread the Large canopy (S) and tighten.

Note: Tighten all of the bolts with Screwdriver and Wrench (W1).

Fig.13: Hang Mosquito netting (U) with Plastic hook (DD) of the inside track, then hang the Wall (V) with

Plastic hook (DD) of the outside track.

Fig14: Fix the assembled gazebo with Peg (II).

Now, your Gazebo is ready for use.

IMPORTANT:

1. When assembling and using this product, basic safety precautions should always be followed to reduce the

risk of personal injury and damage to equipment. Please read all instructions before assembly and use.

2. Some parts may contain sharp edges, wear protective gloves if necessary. At least five or more people are

recommended for safe assembly.

3. Keep all children and pets away from assembly area.

4. At least 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or

electrical wires.

5. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.

6. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the

structure. Remove fabric roof and secure screen & privacy panels to poles.

7. Install on level surface.

8. Never barbecue under this gazebo or use lanterns that have open flames.

9. This package contains small items and plastic bags that should be kept away from children.

10. Check all nuts and bolts for tightness before and during usage. Ensure that all connectors and poles are

firmly secured in position fully. It is important to do so before use so as to avoid a possible collapse or damage

to the item, which could also result in injury.

11. This gazebo is intended for decorative and sunshade purposes only and is not meant to withstand

extreme weather conditions including high winds, torrential rain and snow. Gazebo fabric is water resistant,

not water proof and may leak during exposure to precipitation.

WARNINGS:

1. Assembly Instructions must be followed.

2. Pegs supplied must be used to hold this gazebo in place when upright.

3. Warranty does not cover damage due to extreme weather conditions.

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact

with any flame source. The application of any foreign substance to the tent fabric may render the

flame-resistant properties ineffective.

This unit is heavy. Do not assemble this item alone.

LIMITED WARRANTY:

This limited warranty is extended to the original purchaser and applies to defects in materials and

workmanship of your item provided the item is maintained with care and used only for personal, residential

purposes.

The manufacturer will not cover transportation or delivery costs, or compensate the individual or any

outside party for assembling or disassembling the product. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

Please do not return this product to the store. For technical assistance or replacement

parts call Sunjoy from 8:30 AM to 5:30 PM Eastern Time at the following: 1-866-578-0101 or

e-mail: [email protected]

Printed in ChinaMade in China E

Instructions de Montage

Belvédère en Aluminium Benen

Article Numéro L-GZ339PAL

Nos instructions, étape par étape, faciles à suivre, vous guiderons par le projet du commencement à la fin.

Le résultat sera une pièce de qualité qui se construira facilement et vous donnera des années de plaisir.

Outils Nécessaires: Tournevis, marteau et échelle (de plus de 2.5m).

Identification d’articles: Pour facilité d’identification, toutes les pièces ont une étiquette qui correspond au

numéro de l’étape dans laquelle la pièce sera utilisée.

Étape 2

Étape 1

Étape 3

AVIS: Nous avons emballé les pièces G, J, K, L dans le Poteau Q.

Barre Longue (1) A 2

Barre Longue (2) B 2

Barre Courte (1) C 2

Barre Courte (2) D 2

Connexion des barres E 4

Connexion des

Coins F 4

Barre de Renfort G 4

Barre Inclinée du coin

(1) H 2

Barre Inclinée du coin

(2) I 2

Barre Inclinée Longue J 4

Barre Inclinée Courte du

Centre K 2

Barre Inclinée Longue

du Centre L 2

Connexion du grand Toit M 1

Connexion du Petit Toit N 1

Crochet à Pot O 1

Barre du Petit Toit P 4

Poteau Q 4

Base Q1 4

Barre de Support R 8

Grande Toiture S 1

Petite Toiture T 1

Filet Moustiquaire U 1

Mur V 1

Liste de Pièces

ÉTAPE 1

Fig.0: Installez les Crochets en Plastique (DD) sur la Barre A (B, C, D)

comme dans la Fig.). Employez 8 crochets sur la Barre courte et 10

crochets sur la Barre longue, séparément.

Fig.1: Connectez la Barre Longue (A et B) à la Connexion de Barre (E)

avec Boulon (AA) et Rondelle Plate (BB). Connectez les Barres Courtes

(C et D) à la connexion des Barre (E) de la même façon.

Fig.2: Connectez les Barres longues et les courtes aux connexions des

coins (F) avec Vis (AA) et rondelle plate (BB). Veuillez bien bloquer la

structure des barres pour éviter les dégâts aux crochets en plastique

pendant le montage. Assurez vous que tous les fermoirs sont dans leurs

place.

Fig3: Connectez la barre de renfort (G) au coin de la structure avec vis

(AA) et Rondelle plate (BB).

Fig.4: Installez la connexion des barres inclinées du coin (I) au dessus

des Coins de la structure des barres (A et D) avec vis (AA) et rondelle

plate (BB). Installez la connexion des barres inclinées du coin (H) sur le

dessus des coins de la structure (B et C) de la même façon.

AA Vis M615 64 Pièces

BB Rondelle Plate M6 64 Pièces

CC Crochets en Plastique 144 Pièces

Sachet de quincaillerie 1

Étape 1

BB Rondelle Plate M6 12 Pièces

EE Boulon M6X35 8 Pièces

FF Écrou M6 8 Pièces

W1 Clé M6 1 Pièce

Sachet de quincaillerie 2

ÉTAPE 2

Fig.5: Installez le Crochet à Pot (O) sur la Connexion du Grand Toit (M), ensuite introduisez la Barre inclinée

longue (J), et la Barre inclinée du centre (L) dans la Connexion du Grand Toit (M). (À ce moment, une personne

devra soutenir la Connexion du Toit (M).

Fig.6: Introduisez la Barre inclinée longue (J) dans la connexion des barres inclinées du coin (H et I).

Fig.7: Installez la barre du milieu Courte (Longue) K (L) sur la Connexion du dessus de la barre de la structure

avec boulon (EE), rondelle plate (BB) et Écrou (FF).

Fig.8: Introduisez la Barre du petit toit (P) dans la Connexion du petit toit (N) comme le petit toit ci-dessus.

Fig.9: Étalez la Grande toiture (S) sur le grand toit, mais ne l’étirez pas. Ensuite, installez le petit toit assemblé sur

la Barre inclinée longue (J) avec boulon (EE), rondelle plate (BB) et écrou (FF). Étalez la Petite toiture (T) sur le

petit toit et serrez les boulons.

AA Boulon M5X15 12 pièces

BB Rondelle Plate M6 44 Pièces

GG Boulon M6X45 16 Pièces

HH Boulon M6X25 16 Pièces

II Piquets 8X180 12 Pièces

Sachet de quincaillerie 3

Étape 2

Andere Handbücher für L-GZ339PAL

Inhaltsverzeichnis

Sprachen:

Andere Sunjoy Gartenmöbel Handbücher

Sunjoy

Sunjoy A102022300 Bedienungsanleitung

Sunjoy

Sunjoy D-GZ846PCO-I Bedienungsanleitung

Sunjoy

Sunjoy A102008600 Bedienungsanleitung

Sunjoy

Sunjoy L-PB099PWD Bedienungsanleitung

Sunjoy

Sunjoy A102009800 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ240PST-C Bedienungsanleitung

Sunjoy

Sunjoy L-DN1210SST-E-T Bedienungsanleitung

Sunjoy

Sunjoy A101012202 Bedienungsanleitung

Sunjoy

Sunjoy A102007901 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ098PST-1B Bedienungsanleitung

Sunjoy

Sunjoy L-GZ238PST Bedienungsanleitung

Sunjoy

Sunjoy G-GZ088PST Bedienungsanleitung

Sunjoy

Sunjoy A102005803 Beilage

Sunjoy

Sunjoy D-WA004PAL-B Bedienungsanleitung

Sunjoy

Sunjoy A102008001 Bedienungsanleitung

Sunjoy

Sunjoy S-GZ1182PST Bedienungsanleitung

Sunjoy

Sunjoy D-GZ238PST-11K Bedienungsanleitung

Sunjoy

Sunjoy A102007900 Beilage

Sunjoy

Sunjoy D-GZ840PST-C1 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ311PCO-4 Bedienungsanleitung

Sunjoy

Sunjoy Hampshire L-GZ029PST Bedienungsanleitung

Sunjoy

Sunjoy L-GZ747PST-A Bedienungsanleitung

Sunjoy

Sunjoy AUTOCOVE A110000400 Bedienungsanleitung

Sunjoy

Sunjoy L-GZ238PST-11A Bedienungsanleitung

Beliebte Gartenmöbel Handbücher anderer Marken

Belleze

Belleze 014-HG-20074 Bedienungsanleitung

Hatteras Hammocks

Hatteras Hammocks DCA1-K-HH Bedienungsanleitung

Kozyard

Kozyard Morgan Aluminum Pergola Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5959 Installationshandbuch

OLT

OLT 24 Bedienungsanleitung

forest-style

forest-style HACIENDA 2354 Bedienungsanleitung

Courtyard Creations

Courtyard Creations RUS0188-WM Bedienungsanleitung

RPR

RPR OLLIE CHAIR Bedienungsanleitung

kingsley-bate

kingsley-bate MC-55 Bedienungsanleitung

Weltevree

Weltevree Carrier Bedienungsanleitung

Grange Fencing

Grange Fencing Elite Arch Bedienungsanleitung

Grosfillex

Grosfillex AUVENT YR14 Bedienungsanleitung

X-METAL

X-METAL EAGLE 33511 Bedienungsanleitung

Anova

Anova FBW6R Bedienungsanleitung

Outsunny

Outsunny 84A-090 Bedienungsanleitung

Ivy Terrace

Ivy Terrace IVTD212 Bedienungsanleitung

Breezesta

Breezesta FANBACK ADIRONDACK AD-0101 Bedienungsanleitung

hanit

hanit SUTTON 1 Bedienungsanleitung