Sunmi BL202 Bedienungsanleitung
BL202/BL203
BLA01/BLA02
BLA01/BLA02
SUNMI Technology
ELECTRONIC SHELF LABEL
SUNMI Technology
Page 1/16
Implementation Process of SUNMI
ELECTRONIC SHELF LABEL (ESL)
Shanghai Sunmi Technology Co.,Ltd.
Version: V1.1
Sep. 15, 2019
SUNMI Technology
Page 2/16
Contens
Revision History ..................................................................................................................................3
1 Preliminary Work ..............................................................................................................................4
2 Product docking ................................................................................................................................4
3 Equipment Installation ......................................................................................................................4
3.1 Installation Preparation..........................................................................................................4
3.2 Access Point............................................................................................................................5
3.2.1 Introduction ................................................................................................................5
3.2.2 Base Installation ..........................................................................................................6
3.2.3 Access Point Configuration .........................................................................................7
3.3 Labels and Accessories...........................................................................................................8
4 Software Operation...........................................................................................................................8
4.1 SUNMI digital store ................................................................................................................9
4.1.1 Register an account in SUNMI digital store.................................................................9
4.1.2 Set up docking of product information.......................................................................9
4.1.3 Template design ........................................................................................................11
4.2 SUNMI ESL APP.....................................................................................................................11
4.2.1 Access point configuration........................................................................................11
4.2.2 ESL and product binding ...........................................................................................13
4.2.3 ESL unbinding............................................................................................................15
4.2.4 Product inquiry..........................................................................................................16
SUNMI Technology
Page 3/16
Revision History
Issued Date Revised Contents Ve r s i o n
2019-07-28 Draft V1.0
2019-09-15 English version V1.1
SUNMI Technology
Page 4/16
1Preliminary Work
Before implementing a formal deployment, the following preparations need to be completed:
1. Business cooperation process;
2. Statistics on the number and type of store ESLs;
3. Statistics on the installation mode of store ESLs (the type and quantity of guide rails
and clamps);
4. Location determination of the access point installation (focus on the network wiring);
5. Cloud deployment mode confirmation (SaaS or private cloud).
For the specific preparation process, please see implementation preparation collected in the
separate project documentation.
2Product docking
It is necessary to start the docking of product information as soon as possible, after the
confirmation of business contract and the confirmation of product docking demand.
It takes about two weeks for product information docking.
The general process of product information docking is as follows:
1. SUNMI, the software partner shall discuss docking requirements and release technical
documents;
2. Confirm the docking plan and schedule the project;
3. Developing docking interface and launching after multiple environmental tests.
The deployment and implementation of equipment shall start after product docking.
See separate product docking documents for specific product docking procedures and
instructions.
3Equipment Installation
3.1 Installation Preparation
Tools to be carried with during installation:
1. Rags, used to clean shelves
2. Big scissors or cutting machines for cutting guide rails
3. Electric drill for fixing equipment
SUNMI Technology
Page 5/16
3.2 Access Point
3.2.1 Introduction
The access point (AP) for SUNMI smart ESLs is used to connect ESL equipment with SUNMI
digital store. The image and the instruction emitted by the digital store server are transmitted to the
wireless access point through the Ethernet, and the access point is further distributed to the ESL
through the wireless communication of the 2.4 G frequency band, so that the cloud change price and
the ESL refresh can be realized.
The following table shows the basic specifications of the wireless access point for smart ESLs:
Product name Electronic shelf label AP
Product model BL010
Marketing model SLAP1
Input Power DC 5V/1A or PoE
PoE Specification IEEE 802.3af
Ethernet interface RJ45 100M
Wireless communication band 2.4GHz
Oversize 156mm*156mm*25mm
Installation Ceiling/ Wall/ Desktop Placement
Coverage radius 25m
Supported quantity of ESLs Up to 10,000 single AP
The relevant interface description on the wireless access point for smart ESLs is as follows:
Ports Description
1 Power light
White flicker: during access point startup
Normally White ON: access point is connected to the server and is working
properly
Normally Red ON: access point cannot connect to the server
①
②
③
④
⑤
SUNMI Technology
Page 6/16
2 Reset button Press for 5 seconds to restore the access point to the factory state
3 Internet port RJ45 Ethernet port with indicator light, support for PoE power supply
4 Power port Power adapter port to support independent power supply
5 Installation hooks
Bring its own detachable hooks so that the access point supports a variety of
installation methods
3.2.2 Base Installation
3.2.2.1 Power Supply Mode
SUNMI wireless access point for smart ESLs supports power adapter and PoE power supply,
which power supply mode needs to be determined by in-store environment and installation mode.
The power adapter line is 2 meters long. Use the plug board if it is not long enough, while
strictly forbid to extend the power cord by yourself.
The installation of access point adopts ceiling and hanging-wall styles, but when the power
cord of adapter is not long enough, PoE can be used to power the access point. PoE power supply
needs to apply a separate PoE module or PoE switch, and the network line connected by PoE
module / switch can be plugged directly into the access point to supply power to the access point.
Note: it is strictly forbidden to use both power adapter and PoE power supply at the same time.
3.2.2.2 Internet Access
SUNMI access point for smart ESLs supports DHCP and static IP.
If it is only a single access point, ensure that the access point can connect to the cloud server or
the local server.
If there are more than one access point, it is necessary to let each access point be located under
the same LAN in order to realize the network roaming of access point and labels.
3.2.2.3 Installation and Fixation
The fixation of ESL access point supports ceiling, hanging walls and desktop placement.
It is recommended to install on the ceiling, which can get wider signal coverage; Wall hanging
and desktop placement are only suitable for the cases where the labels are less or close to the access
point.
For ceiling installation, the installation height is recommended as 3~3.5 meters (can be
adjusted by metal universal rod). Max coverage radius of a single access point is 25 meters
(laboratory test results), and 15 meters is recommended.
SUNMI Technology
Page 7/16
If multiple access points are needed, it is necessary to ensure that each access point signal has
an overlapping area, and each label is at least within the coverage of more than one access point.
If there are walls, columns, air pipes, refrigerators, etc., between the access point and the label,
the wireless signal will be affected and attenuated to a certain extent. When the access point is
installed, it should avoid the above objects as far as possible. If it cannot be avoided, it can be
regarded as reducing the coverage radius of the access point.
The signal frequency band of the ESL access point coincides with the band of 2.4G Wi-Fi. If
the ESL access point and the wireless router are installed together, the two will interfere with each
other, so the two should be installed separately.
Actually, when installing the access point, we also need to consider the number of ESLs that
the access point can support. Single SUNMI wireless access point for smart ESLs supports a
maximum of 10000 pieces of ESLs. But considering the refresh speed of batch push and system
redundancy, it is recommended that one access point be allocated for every 3000 pieces of labels.
The installation distance between access points can be adjusted accordingly.
3.2.3 Access Point Configuration
After all ESL access points are installed, it is necessary to use SUNMI assistant APP to
configure each access point, including the Internet access mode and name of each access point.
After configuration, the tie-up between access point and store will be completed to realize the
networking of access point, so that the labels can be connected to the access point.
Detailed configuration refers to the implementation process documentation of software
SUNMI Technology
Page 8/16
operations.
3.3 Labels and Accessories
The label cannot be installed independently, it needs to be installed with various types of
accessories to the shelf, basket rack and pile head.
4Software Operation
Software configuration and usage include operations on the SUNMI digital store website and
on the SUNMI ESL APP of PDA.
In SUNMI digital store, you need to complete:
1. Register an account in SUNMI digital store;
2. Set up docking of product information;
3. Design template for ESL;
On the SUNMI ESL APP of PDA, you need to complete:
1. Configure the Internet access mode of the AP;
2. Bind ESL and product;
3. Unbind ESL and product;
4. Search product.
Check below for specific procedures.
SUNMI Technology
Page 9/16
4.1 SUNMI digital store
The operations of SUNMI digital store need to be complete before the deployment of
equipment installation.
4.1.1 Register an account in SUNMI digital store
Visit website store.sunmi.com through Chrome, Firefox, QQ browser and 360 browser on
computer to register account. If already registered, step over to sign in.
Create the company and store after sign-in. Step over if the account already created.
4.1.2 Set up docking of product information
Enter into [Basic data > Product management] from menu on the page left, you can see the
product list, and all products with bindable ESLs are listed here.
In the prior test or trial, you can input information and create product manually, or modify
product information manually.
In the formal usage, product library is generally necessary to dock with ERP/POS software to
realize auto-import, revise and delete.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Sunmi Touch-Terminal Handbücher
Sunmi
Sunmi T2 LITE Bedienungsanleitung
Sunmi
Sunmi V2 PRO T5921 Bedienungsanleitung
Sunmi
Sunmi T1 mini Betriebsanleitung
Sunmi
Sunmi T2SL Bedienungsanleitung
Sunmi
Sunmi K2 Betriebsanleitung
Sunmi
Sunmi T2 MINI Betriebsanleitung
Sunmi
Sunmi T2 series Betriebsanleitung
Sunmi
Sunmi T2s LITE Bedienungsanleitung
Sunmi
Sunmi V2 Bedienungsanleitung
Sunmi
Sunmi T2 LITE Betriebsanleitung
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung