Sunsystem SPLIT R32-0126-1PH Bedienungsanleitung

EVI DC inverter heat pump

for heating and cooling -

split system

(with Wi-Fi control)

TECHNICAL PASPORT.

INSTALLATION AND OPERATION MANUAL

Version 0.2

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL

GENERAL FEATURES:

1. General Features

1. Low running costs and high efficiency

·A high coefficient of performance (COP) of up

to 5 results in lower running costs compared

with traditional ASHP technology.

·No immersion heater supplement is required.

2. Reduced Capital Costs

·Simple installation

3. High Comfort Levels

·High storage temp. results in increased hot

water availability.

4. No potential danger of any inflammable,

gas poisoning, explosion, fire, electrical shock

which are associated with other heating

systems.

5. A digital controller is incorporated to

maintain the desired water temperature.

6. Long-life and corrosion resistant composite

cabinet stands up to severe climates.

7. Panasonic compressor ensures outstanding

performance, ultra energy efficiency, durability

and quiet operation.

8. Self-diagnostic control panel monitors and

troubleshoots heat pump operations to ensure

safe and reliable operation.

9. Intelligent digital controller with friendly

user interface and blue LED back light.

10. Separate isolated electrical compartment

prevents internal corrosion and extends heat

pump life.

11. The heat pump can operate down to

ambient air temperature of -30°C.

Dear clients, before using the device,

familiarize yourself with this instruction

for installation, storage and operation.

We hope that the appliance you have

purchased will contribute to creating coziness

in your home and reducing energy costs. The

purpose of this technical description and

operating instructions is to familiarize you with

the product and the conditions for its correct

installation and operation. Compliance with

the instructions in this instruction is in the

interest of the buyer and is one of the warranty

conditions.

EVI DC Inverter Air Source Heat

Pump is specially designed for domestic hot

water, home heating and cooling.

EVI DC Inverter Air Source heat

pumps transfer heat from the ambient air to

water, providing high-temperature hot water

up to 60°C. The unique high-temperature heat

pump is widely used for house warming. With

innovative & advanced technology, the heat

pump can operate very well at -30°C ambient

temperature with high output temperatures

up to 60°C, which ensures the compatibility

with normal sized radiator based systems

without supplementation. Compared with

traditional oil/LPG boilers, EVI DC Inverter

heat pump produces up to 50% less CO2 whilst

saves 80% running cost.

Our heat pumps are not only highly efficient,

but also easy and safe to operate.

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL

INSTALLATION and OPERATION MANUAL

1. BASIC INSTRUCTIONS

AND WARNINGS

iBefore starting the installation

process, read the entire instruction.

iThe installation of the device must

strictly follow the instructions,

otherwise the warranty is void.



Any modification or replacement

of the original parts with others

automatically voids the warranty

given by the manufacturer. Use of

the device in environments and

conditions other than those described

in this manual automatically voids

any claims made.

Improper execution of electrical

bonding that does not conform to

good practice may result in injury.

Electrical wiring must be performed

by a qualified electrician.

The device must not be placed in an

aggressive environment that could

damage it (dusty rooms, explosive

substances in the air, open air, etc.).



In order to be sure of the correct

operation of the relief valve, periodic

annual checks of its operation should

be made. If necessary clean it of

limescale and make sure it is not

blocked.



A 0.8 MPa (8 bar) safety valve must

be connected to the inlet of the water

container, which guarantees that the

pressure will not exceed the nominal

one. It is forbidden to place a shut-off

valve between the water container

and the safety valve.



The boiler is intended for drinking

water storage, so it must necessarily

comply with the valid national

regulations for drinking water, or in

case of damage the validity of the

warranty will be void.

The device should never be operated

without water in the water tank.



The power cable has a standard

tip, which must be connected to a

standard outlet (16A; 230V). The

outlet must have a separate power

supply from the mains and there must

be no other connected consumers on

this circuit.



The device can be used by 1 person

familiar with the product‘s operating

instructions. Children over 8 years

old and people with disabilities

can use the device only under the

supervision of an instructed person.

During operation, it is forbidden to

move, lift, clean or repair the device.

The installation of the device must be

carried out according to the current

standards by an authorized specialist.



The device must not be blocked

or objects placed on it. If the

temperature exceeds 850C during

operation, contact a service center

immediately.

Make sure the device does not pose

a threat to anyone. Access to children

and uninstructed persons should be

restricted.

Do not place the unit in a room where

it cannot be removed.



Service and maintenance may only be

performed by an authorized service

technician. In case of damage, first

contact the technician who installed

the device.



Never clean the device with

preparations containing sand, soda,

acids, alcohols. Clean only with a

damp cotton cloth, making sure that

the appliance is disconnected from

the mains.

2. HEAT PUMP ENERGY SAVING TIPS

If you do not plan to use hot water for a

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL

on the inlet and outlet water connecons for

ease of serviceability.

3.2. Installation details:

Prevailing local conditions, such as the

proximity and height of walls and proximity

to public access areas, must be taken into

account in any installation. The heat pump

must be positioned to provide clearance on all

sides for maintenance and inspection.

3.2.1. The place to install the heat pump must

have good ventilation and the air inlet/outlet

must not be obstructed.

3.2.2. The installation site must have good

drainage and be built on a solid foundation.

3.2.3. Do not install the unit in areas

accumulated with pollutants such as

aggressive gas (chlorine or acid), dust, sand

and leaves, etc.

3.2.4. For easier and better maintenance and

troubleshooting, there should be no objects

and walls closer than 1 m around the unit and

no obstructions within 2 meters, vertically, of

the air ventilation unit.

3.2.5. The heat pump must be mounted with

shock-resistant bushings to prevent vibration

and/or imbalance.

3.2.6. Although the controller is waterproof,

care should be taken to avoid direct sunlight

and high temperature. In addition, the heat

pump must be placed in such a way as to

ensure good visibility of the controller.

Note: We recommend installing shut-o valves

on the inlet and outlet water connecons for

ease of service.

3.3. Installation details:

Prevailing local conditions, such as the

proximity and height of walls and proximity

to public access areas, must be taken into

account in any installation. The heat pump

must be positioned to provide clearance on all

sides for maintenance and inspection.

3.3.1. The place to install the heat pump must

have good ventilation and the air inlet/outlet

must not be obstructed.

3.3.2. The installation site must have good

drainage and be built on a solid foundation.

prolonged period, then you might choose

to turn the heat pump off or decrease the

temp. setting of the control several degrees to

minimize energy consumption.

We offer the following recommendations to

help conserve energy and minimize the cost of

operating your heat pump without sacrificing

comfort.

2.1. A maximum water temp. of 60°C is

recommended.

2.2. It is recommended to turn off the heat

pump when ambient air temp. is less than

-30°C or if on vacation for longer than a week.

2.3. To save energy, it is recommended that

the heat pump is operated during daytime

when the ambient temperature is higher.

2.4. The heat pump must be installed outdoors.

To use the risk of freezing, always use a solution

of propylene glycol as a heat carrier.

3. HEAT PUMP INSTALLATION

3.1. The following items are needed and are to

be supplied by the installer for all heat pump

installaons:

3.1.1. Plumbing ngs.

3.1.2. Level surface for proper drainage.

3.1.3. Ensure that a suitable electrical supply

line is provided. See the rang plate on the

heat pump for electrical specicaons. Please

take a note of the specied current rang. No

juncon box is needed at the heat pump; Con-

necons are made inside of the heat pump

electrical compartment. Conduit may be at-

tached directly to the heat pump jacket.

3.1.4. It is advised to use PVC conduit for the

electrical supply line.

3.1.5. Use an addional water circulaon

pump in case of low ow.

3.1.6. It is necessary to install a magnec l-

ter at the inlet of the heat carrier in the heat

pump.

3.1.7. The plumbing should be insulated to re-

duce its heat loss.

Note: We recommend installing shut-o valves

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL

INSTALLATION and OPERATION MANUAL

3.3.3. Do not install the unit in areas

accumulated with pollutants such as

aggressive gas (chlorine or acid), dust, sand

and leaves, etc.

3.3.4. For easier and better maintenance and

troubleshooting, there should be no objects

and walls closer than 1 m around the unit and

no obstructions within 2 meters, vertically, of

the air ventilation unit.

3.3.5. The heat pump must be mounted with

shock-resistant bushings to prevent vibration

and/or imbalance.

3.3.6. Although the controller is waterproof,

care should be taken to avoid direct sunlight

and high temperature. In addition, the heat

pump must be placed in such a way as to

ensure good visibility of the controller.

3.3.7. Plumbing pipes must be installed

with adequate support to prevent

possible damage due to vibration.

The running water pressure must be

maintained above 196 kpa. Otherwise, a

booster pump must be installed.

3.3.8. The acceptable operating voltage range

should be within ±10% of the rated voltage.

The heat pump unit must be

grounded for safety purposes.

3.3.9. If the copper pipes length(between

outdoor unit and indoor unit) is within 5 meter

no need

extra refrigerant added,

(a) But if the copper pipe length is

above 5m, the added refrigerant volume will

be 60g/m for SUNSYSTEM SPLIT R32-0126-

1PH; 120g/m for SUNSYSTEM SPLIT R32-0220-

3PH. The max copper pipe length is 10meter

for SUNSYSTEM SPLIT R32-0126-1PH, 15meter

for SUNSYSTEM SPLIT R32-0220-3PH.

(b) The height difference between

outdoor unit and indoor unit is max 5meter for

SUNSYSTEM SPLIT R32-0126-1PH; Max 8meter

for SUNSYSTEM SPLIT R32-0220-3PH.

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL

4. PREPARATION FOR INSTALLATION

4.1. Outdoor unit with 1 fan - components

B CA

COMPONENTS

АFan K High pressure safety relay

BAir inlet temperature sensor LHigh pressure side Schrader type valve

C. Heat exchanger (evaporator) MCompressor

DElectronic expansion valve NHot gas temperature sensor

E4-way diverter valve OLow pressure compressor gas temperature sensor

FHigh pressure sensor PRefrigerant receiver

GGas temperature sensor low pressure

evaporator

RLow pressure side Schrader type valve

HLow pressure sensor S Temperature sensor regulator of the refrigeration

circuit

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL

INSTALLATION and OPERATION MANUAL

4.2. Outdoor unit with 2 fans - components

N O

SR O

COMPONENTS

АFan K Compressor

BHeat exchanger (evaporator) LLow pressure side Schrader type valve

C. Air inlet temperature sensor MCompressor

D4-way diverter valve NLow pressure compressor gas temperature sensor

ELow pressure sensor ORefrigerant receiver

FGas temperature sensor low pressure

evaporator

PElectronic expansion valve

GHigh pressure sensor RHigh pressure side Schrader type valve

HHigh pressure safety relay S Temperature sensor regulator of the refrigeration

circuit

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL

4.3. Indoor unit - components

SUNSYSTEM SPLIT R32-0126-1PH

SUNSYSTEM SPLIT R32-0220-3PH

B CE D

H G

B CE D

COMPONENTS

АWater inlet F Safety valve

BOutlet water (DHW) GRefrigerant R32 - Input

C. Heating water outlet DN25 HRefrigerant R32 - Outlet

D Water drain hole K Controller

ESafety valve soft pipe LCable holes

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL

INSTALLATION and OPERATION MANUAL

5. INSTALLATION

5.1. Outdoor unit with 1 fan - dimensions.

720

430

1049

1094

720

440

961

161

133

460

SUNSYSTEM SPLIT R32-0126-1PH

ТЕХНИЧЕСКИ ПАСПОРТ. ИНСТРУКЦИЯ за МОНТАЖ и ЕКСПЛОАТАЦИЯ

INSTALLATION and OPERATION MANUAL

5.2. Outdoor unit with 2 fans - dimensions.

1000

688

1056

688

443

407

166.5

114.5

480

1372

SUNSYSTEM SPLIT R32-0220-3PH

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sunsystem Wärmepumpe Handbücher

Sunsystem

Sunsystem MONO R32-0230-3PH Bedienungsanleitung

Sunsystem

Sunsystem TDA Series Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung