SunWare FOX-100 Bedienungsanleitung
Installation-
Manual
FOX-100
Solar Charge Regulator
LED charge current flow
LED Battery charge condition
- green = 71% - 100% fully charged
- yellow = 31% - 70% normal
- red = 0 % - 30 % discharged
Connector battery
Connector solar panel
Fuse holder (10 A)
FOX-100 frontside view
Mounting holes
drill 2,5 mm x 10 mm
Mounting holes
drill 2,0 mm x 10 mm
FOX-100 backside view
Installation
mark with drilling schedule
first drive 2 screws
place regulator
onto screws
drive two bottom
screws
1. Remove fuse
Installation
2. connect battery cable
-
+
3. connect solar panel
Installation
4. reinsert fuse
+-
- by day LED is ON
- by night LED is OFF
Current flow indicator
FOX-100 - Solar Charge Regulator
Technical Data:
I Solar: max 8 amp.
U System: 12 V
Fuse: 10 A
Voltage drop: 0 V to 0,6 V
Conditions of use: -25° - 50°C
Features:
- reverse current protection
- 3 phase charging curve
- quick charge
- trickle charge
- gas charging
- pulse wide modulation
- for gel and lead acid batteries
- over current protection
- short circuit protection
not thawing
More information: http://www.sunware.de
Inhaltsverzeichnis
Andere SunWare Wechselrichter Handbücher
