Super Circuits LCD17-5 Bedienungsanleitung
LCD Monitor User Manual
Products: LCD17-5, LCD19-5
Please read this manual before using your monitor, and always follow instructions
for proper use. Please save this manual for future reference.
LCD17-19_DM
ii www.supercircuits.com
WARNING
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualied
service personnel.
WARNING
!
This monitor is equipped with a power plug with ground. Use only with a grounded
electrical outlet. Always follow the instructions in the installation guide when applying
power. Fire and equipment damage can occur if power is applied incorrectly.
CAUTION
Operate this monitor only in environments where the temperature and humidity is within
the recommended range. Operation outside the recommended range may cause electric
shock and shorten the life of the product.
CAUTION
The slots on the back of the monitor are provided for ventilation. Do not cover these slots or
obstruct the airow around or through the enclosure.
CAUTION
Do not place the monitor in locations where liquids can be splashed on it.
Avoid touching or scratching the LCD screen.
CAUTION
Disconnect the power cord and all other cables from this monitor if the following conditions
exist:
• The power cord is frayed or damaged
• The machine has been dropped or the enclosure is damaged
• When the monitor doesn’t function normally
• If liquid has been spilled into the interior of monitor
Refer repair to qualied service personnel.
iiiLCD Monitor User Manual
LEGAL NOTICE
Supercircuits products are designed to meet safety and performance standards with the use of specic
Supercircuits authorized accessories. Supercircuits disclaims liability associated with the use of non-
Supercircuits authorized accessories.
The recording, transmission, or broadcast of any person’s voice without their consent or a court order is
strictly prohibited by law.
Supercircuits makes no representations concerning the legality of certain product applications such as
the making, transmission, or recording of video and/or audio signals of others without their knowledge
and/or consent. We encourage you to check and comply with all applicable local, state, and federal laws
and regulations before engaging in any form of surveillance or any transmission of radio frequencies.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Supercircuits, Inc. disclaims any proprietary interest in
trademarks and trade names other than its own.
No part of this document may be reproduced or distributed in any form or by any means without the
express written permission of Supercircuits, Inc.
© 2010 Supercircuits, Inc. All rights reserved.
11000 N. Mopac Expressway, Building 300, Austin, TX 78759
Sales/Support: 1.800.335.9777 | Fax: 1.866.267.9777
iv www.supercircuits.com
TABLE OF CONTENTS
Table of Contents
SECTION 1 Introduction ....................................................1
1.1 What’s in the box ............................................1
SECTION 2 Installation and Setup ............................................2
SECTION 3 Basic Operation .................................................6
3.1 Using the remote control ......................................6
3.2 Power .....................................................7
3.3 Select input source ..........................................8
3.4 Working with on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SECTION 4 Specifications ..................................................16
SECTION 5 Troubleshooting ................................................18
1LCD Monitor User Manual
SECTION 1: INTRODUCTION
SECTION 1
Introduction
This video monitor has a rugged metal construction and displays sharp and brilliant video by utilizing an
active TFT LCD matrix. The high contrast ratio generates sharp, crisp lines and images. Also, the fast
response time gives superior clarity for moving images, eliminating “ghosting”. Key features include:
• Built-in BNC, RCA, DVI, S-Video and VGA inputs
• Built in audio speakers
• High resolution of 1280 x 1024 pixel display
• Includes easy connection instructions and a 6 foot VGA cable
1.1 What’s in the box
Your monitor includes the following:
• LCD monitor and base
• User manual
• Power cord, 6’ VGA cable, audio cable with stereo mini-jack connectors
• Stereo mini-jack (male) to RCA (male) adapter
• Remote control and AAA batteries (2)
2www.supercircuits.com
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
To install the monitor:
1. Remove the components from the packaging and inspect them for damage. If the monitor is
damaged in any way, return it to your supplier for replacement.
2. Find the monitor assembly and base. Use the screw provided to attach the base to the monitor
support bracket. The screw may be attached to the underside of the monitor support bracket or in
the base.
Base
Bracket
Screw
3. Find the remote control and batteries, and install the batteries in the remote control.
4. Attach the video source to the monitor input that provides the best video quality. This monitor
connects directly to ve types of video interfaces: HDMI, VGA, S-Video, composite video, and BNC.
The HDMI, VGA, S-video, and composite video connectors are located on the lower back side of the
monitor.
3LCD Monitor User Manual
SECTION 2: INSTALLATION AND SETUP
Inputs on the lower back side of monitor
BNC connectors are located on the back left side of the monitor underneath the back cover.
Remove the cover by carefully pulling the lower edge of the cover away from the monitor.
Back
cover
Pull here to
remove cover
Monitor back cover
Removing the cover opens access to the BNC input and output connectors and their associated
audio jacks.
4www.supercircuits.com
SECTION 2: INSTALLATION AND SETUP
Inputs on the back left side of the monitor
5. If necessary, congure the DVR to enable video (and audio) to the video output you are using. Refer
to the documentation provided with the video sourcing device.
6. Connect the audio output from the video source to the audio connector(s) associated with the
monitor video input port you are using.
7. If necessary, connect the monitor video output (BNC) and audio output (RCA) to a video input
device. (See photo above.)
8. Attach the power cable to the monitor and plug it in to a grounded power outlet.
9. Press the POWER button to power on the monitor. The POWER button is located in the control
panel on the right side of the monitor.
5LCD Monitor User Manual
SECTION 2: INSTALLATION AND SETUP
SOURCE
Move up in menu
Move down in menu
Move right in menu
or volume up
Move left in menu
or volume down
MENU (open/close)
Power
Audio output
Control panel
10. Press the SOURCE button on the monitor control and use the p and q buttons to highlight the
video interface you are using. Press the MENU button on the monitor control panel to select the
highlighted interface. An indication will appear conrming your interface selection.
NOTE If the video source is connected to the monitor’s composite video input (RCA video connector),
select “AV” for the source. If you are using the VGA input, select “PC” as the source.
6www.supercircuits.com
SECTION 3: BASIC OPERATION
SECTION 3
Basic Operation
3.1 Using the remote control
Monitor functions that can be performed on the control panel can also be done with the remote control.
The buttons on the remote control are described below.
Power Mute
Numeric
buttons
MENU
Smart S
F1
Smart P
SOURCE
Volume up
Volume
down
Cursor
buttons
Program list
Channel +
Channel –
OK
16:9
Return
Timer
Info
Color P/N
Audio
NOTE
The function of buttons on the remote control depend on the display source selected. For
instance, if the video input source selected is PC, the monitor will ignore the numeric buttons
and other buttons unrelated to that input source.
Table 1. Remote control button functions
Button Function
Power Turn on or standby
Info Display system information
Mute Silence audio
Timer Time setting button
Andere Handbücher für LCD17-5
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Super Circuits Monitor Handbücher
