Super Superserver 5038ML-H24TRF Bedienungsanleitung

SUPER

SUPERSERVER

MicroCloud

5038ML-H24TRF

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: January 3, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 5038ML-H24TRF.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5038ML-H24TRF is a 24-node, MicroCloud server system based

on the SC939HD-R2K02B 3U chassis and 12 X10SLE-DF motherboards. Please

refer to our web site for an up-to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

system and describes the main features of the Super X10SLE-DF motherboard

and the SC939HD-R2K02B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the server into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5038ML-H24TRF.

iii

Preface

SUPERSERVER 5038ML-H24TRF User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SLE-DF motherboard, including

the locations and functions of connectors, headers and jumpers. Refer to this chap-

ter when adding or removing processors or main memory and when reconﬁguring

the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC939HD-R2K02B 3U server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA................................................................................................................1-2

Rear I/O Ports.................................................................................................1-2

IPMI.................................................................................................................1-2

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Nodes..............................................................................................................3-1

Power Button/LED...........................................................................................3-1

Warning LEDs.................................................................................................3-1

UID LED..........................................................................................................3-2

KVM Switch LED.............................................................................................3-2

3-3 Power Supply Module..................................................................................... 3-2

Power Module LED......................................................................................... 3-2

SUPERSERVER 5038ML-H24TRF User's Manual

vii

Table of Contents

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies ..........................................................................4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard ..............................................................................5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Motherboard Installation/Removal...................................................................5-2

5-3 Connecting Cables..........................................................................................5-2

Data Cables .................................................................................................... 5-2

Connecting Power Cables ..............................................................................5-2

5-4 I/O Ports.......................................................................................................... 5-2

5-5 Processor and Heatsink Installation................................................................5-3

Installing an LGA1150 Processor....................................................................5-3

Installing a Heatsink........................................................................................5-6

5-6 Installing Memory............................................................................................ 5-7

How to Install Memory.................................................................................... 5-7

Memory Support..............................................................................................5-7

Memory Population Guidelines.......................................................................5-8

5-7 Motherboard Details........................................................................................ 5-9

X10SLE-DF Quick Reference.......................................................................5-10

5-8 Connector Deﬁnitions.....................................................................................5-11

5-9 Jumper Settings............................................................................................ 5-12

5-10 Onboard Indicators........................................................................................5-14

5-11 SATA Ports....................................................................................................5-15

5-12 Installing Software.........................................................................................5-16

viii

SuperDoctor® 5 ............................................................................................ 5-17

5-13 Onboard Battery............................................................................................5-18

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Removing the Chassis Cover .........................................................................6-2

6-3 Corresponding Sleds and Fans ......................................................................6-3

6-4 Removing and Installing Sleds .......................................................................6-4

6-5 Installing/Removing Hard Drives..................................................................... 6-5

6-6 System Fans................................................................................................... 6-7

6-7 Power Supply..................................................................................................6-8

Power Supply Replacement............................................................................ 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting the BIOS Setup Utility .......................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

How to Start the Setup Utility .........................................................................7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs....................................................................................................7-23

7-5 IPMI ..............................................................................................................7-24

7-6 Boot Settings.................................................................................................7-27

7-7 Security Settings........................................................................................... 7-30

7-8 Save & Exit ................................................................................................... 7-31

Appendix A System Speciﬁcations

SUPERSERVER 5038ML-H24TRF User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 5038ML-H24TRF is a 24 node, MicroCloud server system com-

prised of the SC939HD-R2K02B 3U chassis and 12 X10SLE-DF motherboards.

Please refer to our web site for information on operating systems that have been

certiﬁed for use with the 5038ML-H24TRF (www.supermicro.com).

Various hardware components have been included with the system, as listed below:

• Four chassis fans (FAN-0149L4)

• Two passive heatsinks, each motherboard (SNK-P0047PSR)

• One air shroud, each motherboard (MCP-310-93902-0N)

• One 11.5-cm KVM/SUVI 30/28AWG dual USB cable, each motherboard (CBL-

0218L)

• One rail kit (MCP-290-41803-0N)

Optional parts for 2.5" slim SSD support:

• One 2.5" slim HDD mounting kit for the SC939, each motherboard (MCP-220-

93906-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5038ML-H24TRF User's Manual

1-2 Motherboard Features

The 5038ML-H24TRF includes a total of 12 X10SLE-DF single processor mother-

boards, which are based on the Intel C224 PCH chipset. Each motherboard consti-

tutes two nodes in the system by supporting two independent CPUs. Below are the

main features of the X10SLE-DF. (See Figure 1-1 for a block diagram of the chipset.)

Processors

Each X10SLE-DF supports two Intel® Xeon® E3-1200 v3 processor (up to 80W) or

4th Gen Core i3, Pentium®, Celeron® processor in an LGA1150 socket (Socket H3).

Please refer to the motherboard description pages on our web site for a complete

listing of supported processors (www.supermicro.com).

Memory

Each X10SLE-DF consists of two nodes, each node has four DIMM slots that can

support up to 32 GB of ECC DDR3-1600/1333 UDIMM (Unbuffered), VLP(Very Low

Proﬁle) memory. This equates to a maximum of 768 GB for the system. Memory

modules of the same size and speed should be used. See Chapter 5 for details.

SATA

A SATA controller integrated into the chipset provides a two-port SATA 3.0 subsys-

tem on each node. Each motherboard supports two 2.5” HDD or four 2.5" slim SSD

hard drives (with an optional kit).

Rear I/O Ports

The rear I/O panel on each motherboard includes one KVM connector, four Gb

Ethernet LAN ports (two for each node), one dedicated IPMI LAN port, a power

button and a node switch (for KVM).

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-

ﬁcation that provides remote access, monitoring and administration for Supermicro

server platforms. IPMI allows server administrators to view a server’s hardware

status remotely, receive an alarm automatically if a failure occurs, and power cycle

a system that is non-responsive. Each node features IPMI 2.0 with KVM over a

dedicated LAN port.

Inhaltsverzeichnis

Andere Super Server Handbücher

Super

Super SC809LT-780B Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung