On Edge –Label Dispenser 6
STEP 6
Push the Reset push-button to bring the feeder into “Ready” mode. Ready mode will be
indicated by illuminated Jog, Cycle, and Stop buttons.
In Ready mode, the feeder can be “Jogged”, “Cycled”, or “Stopped” simply by pressing the
corresponding push-button.
-Pressing the Jog button will advance the machine until the button is released.
-Pressing the Cycle button will begin a complete manual feed cycle of the machine and stop
-Pressing the Stop button will instantly stop the machine and take the feeder out of Ready mode.
-Push Reset button to return to Ready mode.
**NOTE**
If an I/O cable is being used and connected to the labeler, reference the Electrical Schematic on
page 21 for external commands that can be remotely used.
