Supermicro SC216BAC-R920LPB Bedienungsanleitung

SC216BAC-R920LPB

SC216BE1C-R920LPB SC216BE1C-R920WB

SC216BE2C-R920LPB SC216BE2C-R920WB

SC216BE16-R1K28LPB SC216BE16-R1K28WB

SC216E16-R1200LPB SC216E16-R1200UB

SC216E16-R1010LPB SC216BE16-R920WB

SC216BE16-R920LPB SC216BE16-R920UB

SC216BE-R1K28LPB SC216BE-R1K28WB

SC216E26-R1200LPB SC216E26-R1200UB

SC216BE26-R920LPB SC216BE26-R920WB

SC216BE26-R920UB SC216BA-R1K28WB

SC216BA-R1K28LPB SC216BA-R920WB

SC216BA-R920LPB SC216BA-R920UB

SC216A-R900LPB SC216A-R900UB

SC216E1-R900LPB* SC216E1-R900UB*

SC216E2-R900LPB* SC216E2-R900UB*

SUPER ®

SC216 CHASSIS Series

USER’S MANUAL

1.0d

Manual Revision 1.0d

Release Date: March 4, 2014

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC216 2U chassis. Installa-

tion and maintenance should be performed by experienced technicians only.

This document lists compatible parts and congurations available when this docu-

ment was published. Always refer to the our Web site for updates on supported

parts and congurations at www.supermicro.com.

Models marked with and asterisk (*) on the front cover have been designated End

of Life, that is, no longer sold.

SC216 Chassis Manual

Manual Organization

Chapter 1 Introduction

The rst chapter covers the primary components included with this chassis and

describes the main features of the SC216 chassis. This chapter also includes

contact information.

Chapter 2 Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety precautions

that should be followed before installing and servicing this chassis.

Chapter 3 Chassis Components

Refer here for details on this chassis model including the fans, hard drives, airow

shields, and other components.

Chapter 4 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 5 Chassis Setup and Maintenance

This chapter providesdetailed information on this chassis. You should follow the

procedures given in this chapter when installing, removing, or reconguring your

chassis.

Chapter 6 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or reconguring

your chassis into a rack environment.

Appendices

This section lists compatible cables, power supply specications, and compatible

backplanes. Not all compatible backplanes may be listed. Refer to our Web site for

the latest compatible backplane information at http://www.supermicro.com

Preface

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Contacting Supermicro.................................................................................... 1-3

1-3 Returning Merchandise for Service................................................................. 1-4

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Overview ......................................................................................................... 3-1

3-2 Components.................................................................................................... 3-1

Drives .............................................................................................................. 3-1

Backplane........................................................................................................ 3-1

Fans ................................................................................................................ 3-1

Mounting Rails ................................................................................................ 3-1

Power Supply.................................................................................................. 3-2

Air Shroud ....................................................................................................... 3-2

3-3 Where to get Replacement Components........................................................ 3-2

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-2

4-4 Drive Carrier LEDs.......................................................................................... 4-4

SAS/SATA Drives ............................................................................................ 4-4

SC216 Chassis Manual

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing the Power Cord.............................................................................. 5-1

5-3 Removing the Chassis Cover ......................................................................... 5-2

5-4 Installing Hard Drives...................................................................................... 5-3

Installing the Rear 2.5" Hard Drive - SC216B Only........................................ 5-5

5-5 Installing the Motherboard .............................................................................. 5-7

I/O Shield ........................................................................................................ 5-7

Permanent and Optional Standoffs................................................................. 5-8

Motherboard Installation.................................................................................. 5-9

5-6 Installing the Expansion Cards ..................................................................... 5-10

Installing Expansion Cards in Low-Prole Model Chassis ........................... 5-10

Installing Riser Cards and Expansion Cards in UIO Models.........................5-11

5-7 Installing the Air Shrouds .............................................................................. 5-13

Installing the Air Shrouds in the Chassis...................................................... 5-13

Installing the Additional Air Shroud ............................................................... 5-14

5-8 Checking the Airow ..................................................................................... 5-15

5-9 System Fans ................................................................................................. 5-16

5-10 Power Supply ............................................................................................... 5-18

Power Distributor........................................................................................... 5-20

5-11 Removing the Backplane .............................................................................. 5-21

5-12 Installing the Backplane................................................................................ 5-23

Chapter 6 Rack Installation

6-1 Overview ......................................................................................................... 6-1

6-2 Unpacking the System .................................................................................... 6-1

6-3 Preparing for Setup......................................................................................... 6-1

Choosing a Setup Location............................................................................. 6-1

6-4 Warnings and Precautions .............................................................................. 6-2

Rack Precautions............................................................................................ 6-2

General Server Precautions............................................................................ 6-2

Rack Mounting Considerations ....................................................................... 6-3

Ambient Operating Temperature ................................................................ 6-3

Reduced Airow ......................................................................................... 6-3

Mechanical Loading ................................................................................... 6-3

Circuit Overloading..................................................................................... 6-3

Reliable Ground ......................................................................................... 6-3

vii

Preface

6-5 Rack Mounting Instructions............................................................................. 6-4

Identifying the Sections of the Rack Rails...................................................... 6-4

Locking Tabs ................................................................................................... 6-5

Releasing the Inner Rail ................................................................................. 6-5

Installing The Inner Rails on the Chassis....................................................... 6-6

Installing the Outer Rails on the Rack............................................................ 6-7

Standard Chassis Installation ......................................................................... 6-8

Optional Quick Installation Method ................................................................. 6-9

Appendix A SC216 Chassis Cables

Appendix B SC216 Power Supply Specications

Appendix C SAS-216A Backplane Specications

C-1 ESD Safety Guidelines ...................................................................................C-1

C-2 General Safety Guidelines ..............................................................................C-1

C-3 A Note to Users...............................................................................................C-2

C-4 Introduction to the SAS-216A Backplane........................................................C-2

C-5 Front Connector Locations..............................................................................C-3

Front Connectors ............................................................................................C-3

C-6 Front Connectors and Pin Denitions .............................................................C-4

C-7 Front Jumpers.................................................................................................C-5

Explanation of Jumpers ..................................................................................C-5

I2C and SGPIO Modes and Jumper Settings .................................................C-6

Front LED Indicators.......................................................................................C-7

C-8 Rear Components, Connectors and LED Indicators ......................................C-8

Appendix D SAS-216EL Backplane Specications

D-1 Overview of the SAS-216EL1/EL2 Backplanes..............................................D-1

D-2 ESD Safety Guidelines ...................................................................................D-2

D-3 General Safety Guidelines ..............................................................................D-2

D-4 An Important Note to Users ............................................................................D-2

D-5 Introduction to the SAS-216EL Backplane......................................................D-3

D-6 Rear Components and Connectors ...............................................................D-4

Rear Components and Connectors ................................................................D-4

D-7 Rear Connectors and Pin Denitions..............................................................D-5

D-8 Rear Jumper Locations and Pin Denitions ...................................................D-6

Explanation of Jumpers ..................................................................................D-6

D-9 Front Connectors and LED Indicators ............................................................D-8

D-10 Front Connectors and Jumpers ....................................................................D-10

SC216 Chassis Manual

viii

Dual Port and Cascading Congurations

D-11 Single and Dual Port Expanders...................................................................D-11

Single Ports...................................................................................................D-11

Dual Ports .....................................................................................................D-11

D-12 Failover..........................................................................................................D-12

Single Host Bus Adapter...............................................................................D-12

Single Host Bus Adapter Failover.................................................................D-12

Dual Host Bus Adapter ................................................................................D-12

Dual Host Bus Adapter Failover....................................................................D-12

D-13 Chassis Power Card and Support Cables....................................................D-13

Chassis Power Card .....................................................................................D-13

Connectioning an Internal Host Bus Adapter to the Backplane ..................D-14

Supported Internal HBA Cables....................................................................D-14

Connecting an External Host Bus Adapter to the Backplane ......................D-16

Single External Host Bus Adapter ...............................................................D-16

Dual External Host Bus Adapter ..................................................................D-16

Supported External HBA to Backplane Cable ..............................................D-17

Connecting Multiple Backplanes in a Single Channel Environment.............D-18

Single HBA Conguration Cables .................................................................D-19

Connecting Multiple Backplanes in a Dual Channel Environment ...............D-20

Dual HBA Conguration Cables....................................................................D-21

D-14 Supported Cascading Congurations ...........................................................D-22

Server System with Single SAS HBA...........................................................D-23

Dual SAS HBA and Cascaded Conguration ...............................................D-24

Dual SAS HBA and Cascaded Conguration with Branching ......................D-25

Appendix E SAS2-216EL1/EL2 Backplane Specications

Overview of the SAS2-216EL1/EL2 Backplanes............................................E-1

E-1 ESD Safety Guidelines ...................................................................................E-2

E-2 General Safety Guidelines ..............................................................................E-2

E-3 An Important Note to Users ............................................................................E-2

E-4 Introduction to the SAS2-216EL1/EL2 Backplane..........................................E-3

E-5 Connectors......................................................................................................E-4

E-6 Front Connector and Pin Denitions...............................................................E-5

E-7 Jumper Locations and Settings.......................................................................E-6

Explanation of Jumpers ..................................................................................E-6

E-8 Front Connectors and LED Indicators ............................................................E-9

Preface

Dual Port and Cascading Congurations

E-9 Single and Dual Port Expanders................................................................... E-11

Single Ports...................................................................................................E-11

Dual Ports .....................................................................................................E-11

E-10 Failover..........................................................................................................E-12

Single Host Bus Adapter...............................................................................E-12

Single Host Bus Adapter Failover.................................................................E-12

E-11 Failover with RAID Cards and Multiple HBAs ..............................................E-13

Dual Host Bus Adapter ................................................................................E-13

Dual Host Bus Adapter Failover....................................................................E-13

E-12 Chassis Power Card and Support Cables....................................................E-14

Chassis Power Card .....................................................................................E-14

Connecting an Internal HBA to the Backplane ............................................E-15

Supported Internal HBA Cables....................................................................E-15

Connecting an External HBA to the Backplane ...........................................E-17

Single External Host Bus Adapter ...............................................................E-17

Dual External Host Bus Adapter ..................................................................E-17

Supported External HBA to Backplane Cable ..............................................E-18

Connecting Multiple Backplanes in a Single Channel Environment.............E-19

Single HBA Conguration Cables .................................................................E-20

Connecting Multiple Backplanes in a Dual Channel Environment ...............E-21

Dual HBA Conguration Cables....................................................................E-22

E-13 Supported Cascading Congurations ...........................................................E-23

Server System with Single SAS HBA...........................................................E-24

Dual SAS HBA and Cascaded Conguration ...............................................E-25

Dual SAS HBA and Cascaded Conguration with Branching ......................E-26

Appendix F SAS3-216A Backplane Specications

F-1 ESD Safety Guidelines ...................................................................................F-1

F-2 General Safety Guidelines ..............................................................................F-1

Front Connectors ............................................................................................F-2

F-3 A Note to Users...............................................................................................F-2

F-4 Front Connectors and Jumpers ......................................................................F-2

F-5 Front Connector and Pin Denitions............................................................... F-3

F-6 Jumpers...........................................................................................................F-3

Explanation of Jumpers ..................................................................................F-3

F-7 Rear Components, Connectors and LED Indicators ...................................... F-4

Appendix G SAS3-216EL Backplane Specications

SC216 Chassis Manual

Notes

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Chassis Handbücher

Supermicro

Supermicro SC846BE1C-R1K23B Bedienungsanleitung

Supermicro

Supermicro CSE-LB16-AW Bedienungsanleitung

Supermicro

Supermicro SC823M Series Bedienungsanleitung

Supermicro

Supermicro SC743TQ-865B-SQ Bedienungsanleitung

Supermicro

Supermicro Supero SC808T-980B Bedienungsanleitung

Supermicro

Supermicro Supero SC113 Series Bedienungsanleitung

Supermicro

Supermicro SCDS3A-261B Bedienungsanleitung

Supermicro

Supermicro SC811i-280 Bedienungsanleitung

Supermicro

Supermicro SC213AC-R1K23LPB Bedienungsanleitung

Supermicro

Supermicro SC818 Bedienungsanleitung

Supermicro

Supermicro SC815B Bedienungsanleitung

Supermicro

Supermicro SC101F Bedienungsanleitung

Supermicro

Supermicro SCE102 Bedienungsanleitung

Supermicro

Supermicro SC812L-520 Bedienungsanleitung

Supermicro

Supermicro SC847BE1C Series Bedienungsanleitung

Supermicro

Supermicro SC848A-R1800B Bedienungsanleitung

Supermicro

Supermicro SC825TQ-R700B Bedienungsanleitung

Supermicro

Supermicro SC213XAC-R1K05LP Bedienungsanleitung

Supermicro

Supermicro SC813MF2 Series Bedienungsanleitung

Supermicro

Supermicro CSE-LB16-W Bedienungsanleitung

Supermicro

Supermicro SuperChassis CSE-946ED-R2KJBOD Bedienungsanleitung

Supermicro

Supermicro SC116 Series Bedienungsanleitung

Supermicro

Supermicro SC825S2-560LPV Bedienungsanleitung

Supermicro

Supermicro SC836BE1C-R1K03B Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung

JYTEK

JYTEK PXIe-62780 Bedienungsanleitung

HP StorageWorks P2000 Leitfaden