Supermicro SC835XTQ-R982B Bedienungsanleitung
SC835XTQ - R982B
SUPER ®
USER’S MANUAL
1.0
SC835X Chassis
Manual Revision 1.0
Release Date: October 24, 2013
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2013 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
Installation and maintenance should be performed by experienced technicians only.
This document lists compatible parts available when this document was published.
Always refer to the our Web site for updates on supported parts and congurations.
SC835X Chassis Manual
iv
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with this
chassis and describes the main features of the chassis. It also includes contact
information.
Chapter 2: Warning Statements for AC Sytems
This chapter lists warnings, precautions, and system safety. You should thoroughly
familiarize yourself with this chapter for a general overview of safety precautions
that should be followed before installing and servicing this chassis.
Chapter 3: Chassis Components
Refer here for details on this chassis model including the fans, bays, airow shields,
and other components.
Chapter 4: System Interface
This chapter provides details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
displayed by the system.
Chapter 5: Chassis Setup and Maintenance
Follow these procedures when conguring or reconguring your chassis.
Chapter 6: Rack Installation
This chapter details information on rack installation. It gives procedures for installing,
removing or reconguring your chassis in a rack environment.
Appendix A: SC835X Chassis Cables
Appendix B: SC835X Power Supply Specications
Appendix C: SAS-833TQ Series Backplane
v
Preface
Contents
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
1-2 Shipping List.................................................................................................... 1-1
Part Numbers.................................................................................................. 1-1
1-3 Contacting Supermicro.................................................................................... 1-2
1-4 Returning Merchandise for Service................................................................. 1-3
Chapter 2 Standardized Warning Statements for AC Systems
2-1 About Standardized Warning Statements....................................................... 2-1
Warning Denition ........................................................................................... 2-1
Installation Instructions.................................................................................... 2-4
Circuit Breaker ................................................................................................ 2-5
Power Disconnection Warning........................................................................ 2-6
Equipment Installation..................................................................................... 2-8
Restricted Area................................................................................................ 2-9
Battery Handling............................................................................................ 2-10
Redundant Power Supplies .......................................................................... 2-12
Backplane Voltage ........................................................................................ 2-13
Comply with Local and National Electrical Codes........................................ 2-14
Product Disposal........................................................................................... 2-15
Hot Swap Fan Warning................................................................................. 2-16
Power Cable and AC Adapter ...................................................................... 2-18
Chapter 3 Chassis Components
3-1 Components.................................................................................................... 3-1
Drive Bays....................................................................................................... 3-1
Motherboard Support ...................................................................................... 3-1
Backplane........................................................................................................ 3-1
Power Supply.................................................................................................. 3-1
Fans ................................................................................................................ 3-2
Air Shroud ....................................................................................................... 3-2
Switches and Status Indicators....................................................................... 3-2
I/O Expansion slots......................................................................................... 3-2
Mounting Rails ................................................................................................ 3-2
3-2 Unpacking the System .................................................................................... 3-2
3-3 Where to get Replacement Components........................................................ 3-2
SC835X Chassis Manual
vi
Chapter 4 System Interface
4-1 Overview ......................................................................................................... 4-1
4-2 Control Panel Buttons ..................................................................................... 4-2
4-3 Control Panel LEDs ........................................................................................ 4-3
4-4 Drive Carrier LEDs.......................................................................................... 4-4
Chapter 5 Chassis Setup and Maintenance
5-1 Overview ......................................................................................................... 5-1
5-2 Removing the Power Cord.............................................................................. 5-1
5-3 Removing the Chassis Cover ......................................................................... 5-2
5-4 Installing Drives............................................................................................... 5-3
Installing 3.5" Hard Drives .............................................................................. 5-3
Installing the Optional Slim DVD Drive........................................................... 5-6
Using the 5.25" Full--Height Bays................................................................... 5-6
5-5 Installing the Motherboard .............................................................................. 5-7
Permanent and Optional Standoffs................................................................. 5-7
Standoff Labeling ............................................................................................ 5-7
Motherboard Installation Procedure................................................................ 5-8
Installing Expansion Cards ............................................................................. 5-9
Installing an I/O Shield.................................................................................. 5-10
5-6 Installing Cooling Elements............................................................................5-11
System Fans ................................................................................................. 5-12
Replacing a System Fan............................................................................... 5-12
Rear System Fans ........................................................................................ 5-13
Installing the Rear System Fans................................................................... 5-13
GPU Cooling Option ..................................................................................... 5-14
Checking the Server Air Flow ....................................................................... 5-16
5-7 Power Supply................................................................................................ 5-17
Replacing the Power Supply......................................................................... 5-17
Replacing the Power Distributor ................................................................... 5-18
Optional Battery Backup Power.................................................................... 5-19
Chapter 6 Rack Installation
6-1 Preparing for Setup......................................................................................... 6-1
Choosing a Setup Location............................................................................. 6-1
Ambient Operating Temperature ................................................................ 6-1
Adequate Airow ........................................................................................ 6-1
Circuit Overloading..................................................................................... 6-2
Reliable Ground ......................................................................................... 6-2
Physical Rack Precautions ............................................................................. 6-2
General Server Precautions............................................................................ 6-2
vii
Preface
6-2 Rack Mounting Instructions............................................................................. 6-4
Identifying the Sections of the Rack Rails...................................................... 6-4
Locking Tabs ................................................................................................... 6-5
Releasing the Inner Rail ................................................................................. 6-5
Installing The Inner Rails on the Chassis....................................................... 6-6
Installing the Outer Rails on the Rack............................................................ 6-7
Standard Chassis Installation ......................................................................... 6-8
Appendix A Chassis Cables
A-1 Overview .........................................................................................................A-1
A-2 Cables Included with Chassis (SAS/SATA) ....................................................A-1
A-3 Compatible Cables..........................................................................................A-2
Cascading/JBOD SAS Cables ........................................................................A-3
A-4 Extending Power Cables.................................................................................A-5
Front Panel to the Motherboard......................................................................A-5
Appendix B Power Supply Specications
Appendix C SAS-833TQ Backplane Specications
C-1 ESD Safety Guidelines ...................................................................................C-1
C-2 General Safety Guidelines ..............................................................................C-1
C-3 An Important Note to Users ............................................................................C-2
C-4 Introduction to the SAS-833TQ Backplane.....................................................C-2
C-5 Front Connector Locations..............................................................................C-3
Front Components ..........................................................................................C-3
C-6 Front Connector Denitions ............................................................................C-4
C-7 Front Jumper Locations and Pin Denitions...................................................C-6
Explanation of Jumpers..............................................................................C-6
Fan Jumper Settings.......................................................................................C-7
I2C and SGPIO Modes and Jumper Settings .................................................C-8
C-8 Front LED Indicators.......................................................................................C-9
C-9 Rear Connectors and LED Indicators...........................................................C-10
SC835X Chassis Manual
viii
Notes
1-1
Chapter 1: Introduction
Chapter 1
Introduction
1-1 Overview
Supermicro’s SC835X 3U chassis features a unique and highly-optimized design.
The chassis is equipped with a redundant high-efciency power supply. High-
performance fans provide ample optimized cooling and 8 hot-swappable drive bays
offer maximum storage capacity in a 3U form factor.
Note: A complete list of safety warnings is provided on the Supermicro web site at
http://www.supermicro.com/about/policies/safety_information.cfm.
1-2 Shipping List
Part Numbers
Please visit the following link for the latest shipping lists and part numbers for your
particular chassis model:
http://www.supermicro.com/products/chassis/3U/?chs=835
SC835B Chassis
Model HDD I/O Slots Power
Supply
SC835XTQ-R982B 8x 3.5" SAS/SATA &
2x 5.25" Drive Bays
7x FF,
4xHF
980W Redundant
(Platinum Level)
SC835X Chassis Manual
1-2
1-3 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Web Site: www.supermicro.com
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Web Site: www.supermicro.com
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 23511
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Web Site: www.supermicro.com.tw
Technical Support:
Tel: +886-(2)-8226-3990
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Supermicro Chassis Handbücher
Supermicro
Supermicro CSE-947H JBOD Bedienungsanleitung
Supermicro
Supermicro SC842 Series Bedienungsanleitung
Supermicro
Supermicro Supero SC936 Series Bedienungsanleitung
Supermicro
Supermicro CSE-LA15-AW Series Bedienungsanleitung
Supermicro
Supermicro SC513B Series Bedienungsanleitung
Supermicro
Supermicro SC213XAC-R1K05LP Bedienungsanleitung
Supermicro
Supermicro Supero SC809LT-780B Bedienungsanleitung
Supermicro
Supermicro SCLA25 Bedienungsanleitung
Supermicro
Supermicro SC506 Series Bedienungsanleitung
Supermicro
Supermicro CSE-938NH-R2K20BP2 Bedienungsanleitung
Supermicro
Supermicro SC721 Series Bedienungsanleitung
Supermicro
Supermicro SC826TQ-R800LPV Bedienungsanleitung
Supermicro
Supermicro SC113MTQ-330CB Bedienungsanleitung
Supermicro
Supermicro SC812L-520 Bedienungsanleitung
Supermicro
Supermicro SC825MTQ-R700LPB Bedienungsanleitung
Supermicro
Supermicro SC113MFAC2-605CB Bedienungsanleitung
Supermicro
Supermicro SC823MTQ-R700LPB Bedienungsanleitung
Supermicro
Supermicro SC825TQ-R700B Bedienungsanleitung
Supermicro
Supermicro SC815S-560B Bedienungsanleitung
Supermicro
Supermicro SC829TQ-R920LPB Bedienungsanleitung
