Supermicro Supero SC745 Series Bedienungsanleitung
SC745 Air Shroud
User’s Guide
Revison 1.0
SC745 Air Shroud User’s Guide
ii
The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0
Release Date: April 10, 2009
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's SC745 air shroud. Installation and maintenance
should be performed by experienced professionals only.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the SC745
air shroud and describes its main features.
Chapter 2: System Safety
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing the SC745 air shroud.
Chapter 3: Configuration and Installation
Refer here for details on installing the SC745 air shroud on a computer system
mainboard.
SC745 Air Shroud User’s Guide
iv
Notes
v
:
Table of Contents
Chapter 1 Introduction.......................................................................1-1
1-1 Overview.............................................................................................1-1
1-2 Product Checklist of Typical Components.....................................1-1
1-3 Features..............................................................................................1-2
1-4 Returning Merchandise for Service................................................1-2
1-5 Contacting Supermicro.....................................................................1-3
Chapter 2 System Safety..................................................................2-1
2-1 Electrical Safety Precautions...........................................................2-1
2-2 General Safety Precautions.............................................................2-2
2-3 Electrostatic Discharge Precautions ..............................................2-2
2-4 Operating Precautions......................................................................2-2
Chapter 3 Configuration and Installation...............................3-1
3-1 Overview.............................................................................................3-1
3-2 SC745 Air Shroud Components .....................................................3-1
Component Part B ..................................................................................3-2
Component Part C..................................................................................3-3
3-3 Removing Breakable Tabs for Cabling..........................................3-5
3-4 Configuring the SC745 Air Shroud.................................................3-6
Configuring for Configuration-1...............................................................3-7
Configuring for Configuration-2...............................................................3-8
Configuring for Configuration-3...............................................................3-9
3-5 Installing the SC745 Air Shroud....................................................3-10
SC745 Air Shroud User’s Guide
vi
Notes
1-1
Chapter 1
Introduction
1-1 Overview
The SC745 air shroud is a configurable air shroud for system mainboards to enable
maximum efficient air flow through the system. It can be configured to fit different sized
Intel®Xeon™DP 5500/5400/5100/5000 series system mainboards of the same general
shape and size. The SC745 air shroud is optimized for use with Supermicro SC745
series chassis designs and for Supermicro X8Dxx/X7Dxx series mainboards. See
Chapter 3 for configuration details.
1-2 Product Checklist of Typical Components
The SC745 air shroud comes packaged with components and parts as shown in
Table 1-1:
Table 1-1. SC745 Air Shroud Parts and Components
Part Number Description Quantity
MCP-310-48001-0N SC745 Intel DP plastic air shroud, supports up to 18 memory DIMM slots
MCP-310-48004-1N SC745 X8 air shroud component part A 1
MCP-310-48005-1N SC745 X8 air shroud component part B 1
MCP-310-28005-1N X8 air shroud universal component part C 1
MCP-310-28006-1N X8 air shroud universal component part D, tear-drop Mylar
module, 2.2” (55mm) wide 1
NOTE: The default configuration is for parts A, B, and C connected and with
component part D in the accessory box separate.
NOTE: Each individual part for the SC745 air shroud is labeled with its
component part letter for easy identification.
SC745 Air Shroud User’s Guide
1-2
1-3 Features
The SC745 air shroud includes the following features:
• Main air shroud component
• Three detachable components for creating multiple configurations
• Breakable tabs for power cable management
• Clear plastic material construction for ease of viewing
1-4 Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your vendor for
a Returned Merchandise Authorization (RMA) number. When returning to the
manufacturer, the RMA number should be prominently displayed on the outside of the
shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will
be applied for all orders that must be mailed when service is complete.
For faster service, RMA authorizations may be requested online at:
http://www. supermicro.com/support/rma/
Whenever possible, repack the chassis in the original Supermicro carton, using the
original packaging material. If these are no longer available, be sure to pack the chassis
securely, using packaging material to surround the chassis so that it does not shift within
the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages incurred
in shipping or from failure due to the alteration, misuse, abuse or improper maintenance
of products.
During the warranty period, contact your distributor first for any product problems.
1-3
Chapter 1: Introduction
1-5 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: marketing@supermicro.com (General Information)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
‘s-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email:
Asia-Pacific
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Web Site: www.supermicro.com.tw
Technical Support:
Email: support@supermicro.com.tw
Tel: +886-2-8228-1366, ext. 132 or 139
SC745 Air Shroud User’s Guide
1-4
Notes
Inhaltsverzeichnis
Andere Supermicro Computerzubehör Handbücher
