Supermicro FatTwin F628G3-FT+ Bedienungsanleitung

FatTwin®

F628G3-FT+

F628G3-FTPT+

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Revision 1.0

Release Date: June 25, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

providesinformationfortheinstallationanduseoftheFatTwin™F628G3-FT+/FTPT+.

Installation and maintainance should be performed by experienced technicians only.

The FatTwin F628G3-FT+/FTPT+ is a high-end server based on the

F424AG-R2K04BP 4U rackmount chassis and a dual processor X10DRFF-iG/iTG

serverboard. All models have four serverboard nodes, each node with an IPMI

LAN port and two (2) hot-swap hot-swap 3.5" SATA Hard Disk Drives (HDD).

The only difference between the two server models is that the F628G3-FTPT+

has 10-Gigabit LAN ports, wheras the F628G3-FT+ only has Gigabit LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with

the server system and describes the main features of the X10DRFF-iG/iTG

serverboards and the F424AG-R2K04BP chassis.

Chapter 2: Server Installation

ThischapterdescribesthestepsnecessarytoinstalltheFatTwinF628G3-FT+/FTPT+

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

FatTwin F628G3-FT+/FTPT+.

FatTwin F628G3-FT+/FTPT+ User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRFF-iG/iTG serverboards,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the F424AG-R2K04BP server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: System Speciﬁcations

FatTwin F628G3-FT+/FTPT+ User's Manual

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA ....................................................................................................... 1-3

PCI Expansion Slots....................................................................................... 1-3

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller......................................................................................... 1-3

Aspeed AST2400 Controller ..........................................................................1-3

Other Features Supported by the Aspeed AST2400 Controller ................ 1-4

Power Supply..................................................................................................1-4

Super I/O.........................................................................................................1-5

1-3 Server Chassis Features ................................................................................ 1-5

System Power................................................................................................. 1-5

SATA Subsystem............................................................................................. 1-5

I/O Ports..........................................................................................................1-5

Cooling System............................................................................................... 1-5

Air Shrouds ..................................................................................................... 1-6

Mounting Rails ................................................................................................ 1-6

1-4 Advanced Power Management.......................................................................1-6

Intel® Intelligent Power Node Manager (NM).................................................1-6

Manageability Engine (ME).............................................................................1-6

1-5 Contacting Supermicro....................................................................................1-8

1-6 Fat Twin: System Notes.................................................................................. 1-9

Nodes.............................................................................................................. 1-9

System Power................................................................................................. 1-9

SATA Backplane/Drives...................................................................................1-9

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

2-4 Warnings and Precautions..............................................................................2-2

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

FatTwin F628G3-FT+/FTPT+ User's Manual

vii

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-4

2-5 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Adjusting the Rails.......................................................................................... 2-5

Locking Tabs ...................................................................................................2-5

Installing the Rails on a Rack......................................................................... 2-6

Chassis Installation......................................................................................... 2-7

2-6 Checking the Serverboard Setup.................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 F424AG Front I/O Control Panel ....................................................................3-1

Control Panel Buttons..................................................................................... 3-2

3-3 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Table of Contents

viii

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables................................................................................. 5-2

5-3 Control Panel Connectors and I/O Ports........................................................ 5-2

5-4 Processor and Heatsink Installation................................................................5-3

Installing a Passive CPU Heatsink .................................................................5-7

Removing the Passive Heatsink..................................................................... 5-8

5-5 Installing Memory............................................................................................ 5-9

Removing Memory Modules ...........................................................................5-9

Memory Support............................................................................................5-10

5-6 Serverboard Details ...................................................................................... 5-12

5-7 Connector Deﬁnitions.................................................................................... 5-15

5-8 Jumper Settings............................................................................................ 5-19

Explanation of Jumpers ................................................................................ 5-19

5-9 Onboard Indicators........................................................................................5-22

5-10 Serial ATA and SAS Connections .................................................................5-24

5-11 Installing Drivers............................................................................................ 5-25

SuperDoctor 5............................................................................................... 5-26

5-12 Serverboard Battery...................................................................................... 5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Power Cord.............................................................................. 6-3

6-4 Removing Nodes from the Chassis................................................................ 6-3

6-5 Installing and Removing Hard Drives .............................................................6-4

Removing Hard Drives from the Front of the Node........................................6-5

Installing 3.5" Hard Drives into the Drive Carriers.......................................... 6-6

6-6 Node Conﬁgurations .......................................................................................6-8

6-7 Removing the Node Cover..............................................................................6-9

6-8 Removing and Installing the Backplane........................................................ 6-10

Removing the Backplane.............................................................................. 6-10

Installing the Backplane.................................................................................6-11

6-9 Power Distributor Board Replacement.......................................................... 6-12

FatTwin F628G3-FT+/FTPT+ User's Manual

6-10 Installing the Serverboard ............................................................................ 6-14

Compatible Motherboards.............................................................................6-14

Permanent and Optional Standoffs............................................................... 6-14

6-11 Installing Front and Rear Expansion Cards..................................................6-16

PCI-E Slot Setup........................................................................................... 6-16

F424AG PCI-E Slot Conﬁgurations............................................................... 6-16

Installing a Low-Proﬁle Expansion Card....................................................... 6-17

6-12 Installing Internal GPUs................................................................................ 6-18

Installing a Front Nvidia GPUs/Intel Xeon Phi into the GPU Bracket .........6-18

Installing a Front Nvidia GPUs/Intel Xeon Phi into the Node ......................6-18

Installing Rear Nvidia GPUs/Intel Xeon Phi into the Bracket ...................... 6-19

Installing Rear Nvidia GPUs/Intel Xeon Phi into a Node ............................6-20

6-13 Installing the Air Shroud................................................................................6-21

Air Shrouds ................................................................................................... 6-21

6-14 Checking the Airﬂow .................................................................................... 6-22

Installation Complete.....................................................................................6-22

6-15 Replacing System Fans................................................................................ 6-23

6-16 Replacing the Power Supply......................................................................... 6-24

Power Supply Replacement.......................................................................... 6-24

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-3

7-4 Event Logs.................................................................................................... 7-41

7-5 IPMI............................................................................................................... 7-43

7-6 Security Settings........................................................................................... 7-45

7-7 Boot Settings................................................................................................. 7-46

7-8 Save & Exit ................................................................................................... 7-48

Appendix A System Speciﬁcations

Table of Contents

Notes

FatTwin F628G3-FT+/FTPT+ User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6023P-i Bedienungsanleitung

Supermicro

Supermicro 7048GR-TR Betriebsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Supermicro

Supermicro BPN-NVMe3-216A-N4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-120TP-DTTR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-4MU32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 530MT-H12TRF Bedienungsanleitung

Supermicro

Supermicro A+ SERVER 1012C-MRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8046B-TRLF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220TP-HC8TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-520P-WTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

Supermicro

Supermicro Supero SuperServer 5018A-MLTN4 Bedienungsanleitung

Supermicro

Supermicro SERIES3800/S120T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5039MC-H12TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 120GQ-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 620BT-HNTR Bedienungsanleitung

Supermicro

Supermicro 6018R-WTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung