Supermicro SUPERSERVER 6015P-8(R) Bedienungsanleitung

SUPERSERVER 6015P-T(R)

SUPERSERVER 6015P-8(R)

USER’S MANUAL

1.0c

SUPER

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0c

Release Date: July 31, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6015P-T(R)/

6015P-8(R). Installation and maintainance should be performed by experienced

technicians only.

The SuperServer 6015P-T(R)/6015P-8(R) is a high-end server based on the

SC816A-(R)700/SC816S-(R)700 1U rackmount chassis and the X7DBP-i/X7DBP-8,

a dual processor serverboard that supports Intel®Xeon®5100/5000 series proces-

sors at a Front Side (System) Bus speed of 1333/1066/667 MHz and up to 32 GB

of FBD ECC DDR2-667/533 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the serv-

er system and describes the main features of the X7DBP-i/X7DBP-8 serverboard

and the SC816A-(R)700/SC816S-(R)700 chassis, which comprise the SuperServer

6015P-T(R)/6015P-8(R).

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6015P-

T(R)/6015P-8(R) into a rack and check out the server conﬁguration prior to pow-

ering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

SUPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6015P-T(R)/6015P-8(R).

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7DBP-i/X7DBP-8 serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC816A-(R)700/SC816S-(R)700

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SATA/SCSI or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Software Installation

Appendix D: System Speciﬁcations

Preface

Notes

Table of Contents

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

1-4 Contacting Supermicro ................................................................................... 1-6

Chapter 2: Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System ................................................................................... 2-1

2-3 Preparing for Setup ........................................................................................ 2-1

2-4 Installing the System into a Rack ................................................................... 2-4

2-5 Checking the Serverboard Setup ................................................................... 2-8

2-6 Checking the Drive Bay Setup ..................................................................... 2-10

Chapter 3: System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons .................................................................................... 3-1

UID ........................................................................................................... 3-1

Power ....................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

UID ........................................................................................................... 3-2

Overheat/Fan Fail .................................................................................... 3-2

NIC2 ......................................................................................................... 3-2

NIC1 ......................................................................................................... 3-2

HDD .......................................................................................................... 3-3

Power ....................................................................................................... 3-3

3-4 SATA/SCSI Drive Carrier LEDs ...................................................................... 3-3

Chapter 4: System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ........................................................................... 4-2

4-3 ESD Safety Precautions ................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

SUPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

Chapter 5: Advanced Serverboard Setup

5-1 Handling the Serverboard .............................................................................. 5-1

5-2 Processor and Heatsink Installation ............................................................... 5-2

5-3 Connecting Cables ......................................................................................... 5-5

Connecting Data Cables .......................................................................... 5-5

Connecting Power Cables ....................................................................... 5-5

Connecting the Control Panel .................................................................. 5-6

5-4 I/O Ports ......................................................................................................... 5-7

5-5 Installing Memory ........................................................................................... 5-7

5-6 Adding PCI Cards ........................................................................................... 5-9

5-7 Serverboard Details ........................................................................................ 5-9

X7DBP-i/X7DBP-8 Layout ...................................................................... 5-10

X7DBP-i/X7DBP-8 Quick Reference ...................................................... 5-11

5-8 Connector Deﬁnitions ................................................................................... 5-12

Primary ATX Power Connector .............................................................. 5-12

Auxiliary Power Connector ..................................................................... 5-12

NMI Button ............................................................................................. 5-12

Power LED ............................................................................................. 5-12

HDD LED ............................................................................................... 5-13

NIC1 LED ............................................................................................... 5-13

NIC2 LED ............................................................................................... 5-13

Overheat/Fan Fail LED .......................................................................... 5-13

Power Fail LED ...................................................................................... 5-13

UID Button and LED .............................................................................. 5-14

Power Button .......................................................................................... 5-14

Universal Serial Bus (USB0/1) ............................................................... 5-14

Chassis Intrusion .................................................................................... 5-14

Serial Ports ............................................................................................. 5-15

Fan Headers .......................................................................................... 5-15

Extra Universal Serial Bus Headers ...................................................... 5-15

ATX PS/2 Keyboard and Mouse Ports .................................................. 5-16

Overheat LED ........................................................................................ 5-16

Wake-On-LAN ........................................................................................ 5-16

Wake-On-Ring ........................................................................................ 5-16

SMB ........................................................................................................ 5-17

LAN1/2 ................................................................................................... 5-17

Alarm Reset ........................................................................................... 5-17

Compact Flash Power Header ............................................................... 5-17

vii

Table of Contents

viii

5-9 Jumper Settings ............................................................................................ 5-18

Explanation of Jumpers ......................................................................... 5-18

CMOS Clear ........................................................................................... 5-18

VGA Enable/Disable ............................................................................... 5-18

Watch Dog Enable/Disable .................................................................... 5-19

Compact Flash Master/Slave ................................................................. 5-19

LAN Enable/Disable ............................................................................... 5-19

SCSI Controller Enable/Disable ............................................................. 5-20

SCSI Termination Enable/Disable .......................................................... 5-20

SMBus to PCI Slots ............................................................................... 5-20

5-10 Onboard Indicators ....................................................................................... 5-21

LAN1/LAN2 LEDs .................................................................................. 5-21

Unit Identiﬁer .......................................................................................... 5-21

5-11 Floppy, IDE, SATA and SCSI Drive Connections ......................................... 5-22

Floppy Connector ................................................................................... 5-22

IDE Connectors ...................................................................................... 5-23

SATA Ports ............................................................................................. 5-23

Ultra320 SCSI Ports ............................................................................... 5-24

Chapter 6: Advanced Chassis Setup

6-1 Static-Sensitive Devices ................................................................................. 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure .................................................................................. 6-3

Replacing System Fans ........................................................................... 6-3

6-4 Drive Bay Installation/Removal ...................................................................... 6-4

Accessing the Drive Bays ........................................................................ 6-4

SATA/SCSI Drive Installation ................................................................... 6-5

DVD-ROM and Floppy Drive Installation ................................................. 6-7

6-5 Power Supply ................................................................................................. 6-8

6015P-TR/6015P-8R: Power Supply Failure ........................................... 6-8

6015P-TR/6015P-8R: Removing/Replacing the Power Supply ............... 6-8

6015P-T/6015P-8: Power Supply Failure ................................................ 6-9

6015P-T/6015P-8: Removing/Replacing the Power Supply .................... 6-9

Chapter 7: BIOS

7-1 Introduction ..................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup ............................................................................................ 7-2

SUPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

Table of Contents

7-4 Advanced Setup ............................................................................................. 7-6

7-5 Security ......................................................................................................... 7-18

7-6 Boot .............................................................................................................. 7-19

7-7 Exit ................................................................................................................ 7-20

Appendices:

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Software Installation

Appendix D: System Speciﬁcations

Notes

SUPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 2048U-RTR4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-E Series Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer AS -1015A-MT Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-73DBRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-420GU-TNXR Bedienungsanleitung

Supermicro

Supermicro SuperServer E200-8D Bedienungsanleitung

Supermicro

Supermicro SBI-7127R-SH Bedienungsanleitung

Supermicro

Supermicro AS-1010S-MR Bedienungsanleitung

Supermicro

Supermicro AS-1013S-MTR Bedienungsanleitung

Supermicro

Supermicro 7044H-32R Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-611E-1C2N Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1018R-WC0R Bedienungsanleitung

Supermicro

Supermicro E100-9APP Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SuperServer series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021F Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5086B-TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 510T-ML Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220TP-HTTR Bedienungsanleitung

Supermicro

Supermicro ASG-1014S-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-T2 Bedienungsanleitung

Supermicro

Supermicro SuperServer E301-9D-8CN8TP Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung