Supermicro SUPERSERVER 8045C-3R Bedienungsanleitung

SUPER

SUPERSERVER 8045C-3R

USER’S MANUAL

Revision 1.0

Manual Revision 1.0

Release Date: October 1, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 8045C-3R. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 8045C-3R is a high-end quad processor server based on the

SC748TQ-R1200 4U/tower chassis and the Super X7QC3 serverboard. The X7QC3

supports four Intel® Xeon MP processors. Please refer to our web site for an up-

to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7QC3 serverboard

and the SC748TQ-R1200 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 8045C-3R into

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8045C-3R.

iii

Preface

SUPERSERVER 8045C-3R User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X7QC3 serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC748TQ-R1200 server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SAS or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: LED Indicators

Appendix B: BIOS POST Codes

Appendix C: Installing Software and Drivers

Appendix D: System Speciﬁcations

Preface

Notes

SUPERSERVER 8045C-3R User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial Attached SCSI (SAS) .......................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

ATI Graphics Controller................................................................................... 1-3

IPMI................................................................................................................. 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power ................................................................................................. 1-4

SATA Subsystem............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System ............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ............................................................................................................. 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Rack Precautions .................................................................................................

Server Precautions...............................................................................................

Choosing a Setup Location............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Rack Rail Sections.......................................................................................... 2-4

vii

Table of Contents

Installing the Chassis Rails............................................................................. 2-5

Installing the Rack Rails ................................................................................. 2-6

Installing the Server into the Rack.................................................................. 2-7

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Preparing to Power On ................................................................................. 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 SAS Drive Carrier LEDs ................................................................................. 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................ 5-5

5-6 Installing Memory ............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

5-7 Adding PCI Add-On Cards.............................................................................. 5-9

5-8 Serverboard Details ...................................................................................... 5-10

viii

SUPERSERVER 8045C-3R User's Manual

X7QC3 Quick Reference ...............................................................................5-11

5-9 Connector Deﬁnitions ................................................................................... 5-12

5-10 Jumper Settings ............................................................................................ 5-18

5-11 Onboard Indicators........................................................................................ 5-22

5-12 Floppy, IDE, and SAS Ports.......................................................................... 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-2

6-2 Control Panel .................................................................................................. 6-3

6-3 System Fans ................................................................................................... 6-4

Fan Failure ...................................................................................................... 6-4

Replacing Chassis Fans ............................................................................ 6-4

6-4 Drive Bay Installation ...................................................................................... 6-6

SAS/SATA Drives ............................................................................................ 6-6

SAS/SATA Backplane...................................................................................... 6-6

Installing Components in the 5.25" Drive Bays .............................................. 6-8

6-5 Power Supply .................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Removing/Replacing the Power Supply.......................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

7-2 Main Setup ...................................................................................................... 7-2

7-3 Advanced Settings .......................................................................................... 7-3

7-5 Security Settings ........................................................................................... 7-23

7-6 Exit Options................................................................................................... 7-24

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C HostRAID Setup Guidelines

Appendix D System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 8045C-3R is a high-end server that is comprised of two main sub-

systems: the SC748TQ-R1200 chassis and the X7QC3 quad Intel Xeon processor

serverboard. Please refer to our web site for information on operating systems that

have been certiﬁed for use with the 8045C-3R (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the SuperServer 8045C-3R, as listed below:

Four (4) CPU passive heat sinks (SNK-P0029P)

Two (2) CPU retention brackets (BKT-0021L)

Three (3) 8-cm rear chassis fans (FAN-0081)

Three (3) 9-cm hot-swap chassis fans (FAN-0090)

One (1) air shroud (MCP-310-82801-0N)

One (1) ﬂoppy drive (FPD-PNSC-01)

One (1) rail set (MCP-290-00001-00)

SAS Accessories

One (1) SAS backplane (CSE-SAS-M35TQ)

Two (1) SAS cables (CBL-0097L-02)

Five (5) hot-swap drive carriers (CSE-PT17)

Two (2) dummy drive bay covers (CSE-PT36)

One (1) Super Server 8045C-3R User's Manual

•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 8045C-3R User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 8045C-3R lies the X7QC3, a quad processor

serverboard based on the Intel 7300 chipset. Below are the main features of the

X7QC3. (See Figure 1-1 for a block diagram of the 7300 chipset).

Processors

The X7QC3 supports four Intel Xeon MP 7300/7200 Series processors. Please

refer to the serverboard description pages on our web site for a complete listing of

supported processors (www.supermicro.com).

Memory

The X7QC3 has 24 240-pin DIMM slots that can support up to 192 GB of ECC

FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Single channel, two-channel

interleaved and four-channel interleaved memory are all supported. Modules of the

same size and speed should be used. See Chapter 5 Section 5 for details.

Serial Attached SCSI (SAS)

An onboard LSI-1068E Serial Attached SCSI (SAS) controller is integrated into

the X7QC3, which supports eight SAS hard drives with SES2. The SAS drives are

connected to a backplane that provides power, bus termination and conﬁguration

settings and are hot-swappable units. Note: The operating system you use must

have RAID support to enable the hot-swap capability and RAID function of the

SAS drives. RAID 0, 1 and 10 are supported.

Serial ATA

A SATA controller is integrated into the South Bridge (ESB2) section of the chipset

to provide a six-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 supported.

The Serial ATA drives are hot-swappable units.

PCI Expansion Slots

The X7QC3 has two PCI-Express x8 slots, one PCI-Express x4 slot and one PCI-X

133 MHz slot.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221H-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FN5T Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-TR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2124BT-HTR Bedienungsanleitung

Supermicro

Supermicro 8048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-610P-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-32 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6023L-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-520P-ACTR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-W4TR Bedienungsanleitung

Supermicro

Supermicro SYS-1028UX-LL1-B8 Bedienungsanleitung

Supermicro

Supermicro GEM002 Bedienungsanleitung

Supermicro

Supermicro A+ AS-1114S-WN10RT Bedienungsanleitung

Supermicro

Supermicro BPN-NVMe3-136NB-L Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110P-FDWTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro A+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019GP-TT Bedienungsanleitung

Supermicro

Supermicro SC116AC2-R706WB Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210TP-HPTR Bedienungsanleitung

Supermicro

Supermicro TwinPro 1029TP-DTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5039MC-H12TRF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung