Supero SC747TQ-R1400B Bedienungsanleitung

SC747TQ-R1400B SC747TQ-R1620B

SC747BTQ-R1K62B

USER’S MANUAL

1.0b

SC747 CHASSIS

Series

SUPER ®

SC747 Chassis Manual

Manual Revision 1.0b

Release Date: December 26, 2012

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and conguration of the SC747 4U chas-

sis. Installation and maintenance should be performed by experienced technicians

only.

Supermicro's SC747 server/workstation chassis is truly industry's most powerful

high-performance server chassis. The SC747 offers eleven full-height, full-length

PCI-E expansion slots and four sets of 6-pin and 8-pin power connectors to support

up to four double-width GPU cards. The SC747 comes equipped with optimized

redundant high-efciency (93%) Gold Level 1400W or 1620W Platinum Level

power supplies with PMBus support and optimized thermal solutions with four

hot-swappable cooling fans and two hot-swappable exhaust fans. In the case of

the SC747BTQ-R1K628B this chassis also supports the option for up to two addi-

tional external rear fans. All of these fans incorporate advanced fan speed controls

to accommodate the most demanding GPU applications. Its eight hot-swappable

SAS/SATA hard drives offer exceptional storage capacity, and three 5.25" storage

modules can rotate 90° to accommodate tower or rack-mounting congurations.

This document lists compatible parts available when this document was published.

Always refer to the our Web site for updates on supported parts and congurations.

SC747 Chassis Manual

Manual Organization

Chapter 1 Introduction

The rst chapter provides an overview of the main components included with this

chassis and describes the main features of the SC747 chassis. This chapter also

includes contact information.

Chapter 2 Standardized Warning Statements for AC Systems

This chapter lists warnings, cautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety cautions that

should be followed before installing and servicing this chassis.

Chapter 3 Chassis Components

Refer here for details on this chassis model including the fans, bays, airow shields,

and other components.

Chapter 4 System Interface

This chapter provides details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 5 Chassis Setup and Maintenance

Chapter 5 features detailed information on this chassis. You should follow the

procedures given in this chapter when installing, removing, or reconguring your

chassis.

Chapter 6 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or reconguring

your chassis into a rack environment.

Preface

Appendices

This section lists compatible cables, power supply specications, and compatible

backplanes. Not all compatible backplanes are listed. Refer to our Web site for the

latest compatible backplane information.

Appendix A Chassis Cables

Appendix B Power Supply Specications

Appendix C SAS-747TQ Backplane Manual

Appendix D M35S and M35T1 Mobile Rack Specications

Appendix E M35TQ Mobile Rack Specications

SC747 Chassis Manual

Table of Contents

Preface.......................................................................................................... iii

About This Manual .............................................................................................iii

Manual Organization ..........................................................................................iv

Appendices..........................................................................................................v

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

1-3 Chassis Features ............................................................................................ 1-2

CPU................................................................................................................. 1-2

I/O Expansion Slots ........................................................................................ 1-2

Peripheral Drives............................................................................................. 1-2

Other Features................................................................................................ 1-2

Contacting Supermicro.................................................................................... 1-3

Chapter 2 Standardized Warning Statements for AC Systems ............ 2-1

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components..............................................................3-1

3-1 Overview ......................................................................................................... 3-1

3-2 Components .................................................................................................... 3-1

Chassis............................................................................................................ 3-1

Backplane........................................................................................................ 3-1

Fans ................................................................................................................ 3-1

Mounting Rails (optional) ................................................................................ 3-1

vii

Preface

Power Supply.................................................................................................. 3-2

3-3 Where to get Replacement Components........................................................ 3-2

Chapter 4 System Interface......................................................................4-1

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-2

4-4 Drive Carrier LEDs.......................................................................................... 4-4

SAS/SATA Drives ............................................................................................ 4-4

Chapter 5 Chassis Setup and Maintenance ...........................................5-1

5-1 Overview ......................................................................................................... 5-1

5-2 Installation and Maintenance .......................................................................... 5-1

5-3 Chassis Covers ............................................................................................... 5-2

Removing the Main Cover .............................................................................. 5-3

Opening the Front Cover ................................................................................ 5-4

5-4 Conguring the the Storage Module .............................................................. 5-5

Tower or Rack Conguration........................................................................... 5-5

Installing Drives in the Storage Module.......................................................... 5-7

Adding Five Hard Drives Using a Supermicro Mobile Rack......................... 5-12

5-5 Installing Hard Drives.................................................................................... 5-14

Installing Hard Drives into the Chassis......................................................... 5-14

5-6 Installing the Motherboard ............................................................................ 5-16

I/O Slot Shield Installation............................................................................. 5-16

Permanent and Optional Standoffs............................................................... 5-17

Installing the Motherboard ............................................................................ 5-18

Installing the Active Heatsink........................................................................ 5-19

Power Supply Connections........................................................................... 5-20

Conguring the Expansion Slots................................................................... 5-21

Installing Double-Width Graphics Cards....................................................... 5-23

5-7 System Fans ................................................................................................. 5-25

Replacing Mid-Chassis System Fans ........................................................... 5-25

Replacing Rear Exhaust Fans ...................................................................... 5-26

Adding Optional External Rear Fans (BTQ Model Only).............................. 5-27

5-8 Power Supply ............................................................................................... 5-30

Replacing the Power Supply......................................................................... 5-30

SC747 Chassis Manual

viii

Rack Precautions............................................................................................ 6-2

Rack Mounting Considerations ....................................................................... 6-2

Removing the Chassis Cover and Feet.......................................................... 6-4

Installing the Chassis Handles and Inner Rails.............................................. 6-7

Installing the Outer Rails to the Rack............................................................. 6-8

Installing the Chassis into a Rack................................................................... 6-9

Installing the Chassis Cover ......................................................................... 6-10

Installing Feet on the Chassis .......................................................................6-11

Appendix A SC747 Chassis Cables........................................................ A-1

Appendix B SC747 Power Supply Specications................................. B-1

Appendix C SAS-747TQ Backplane Specications .............................. C-1

Appendix D M35T1 Mobile Rack Specications ................................... D-1

Appendix E M35TQ Mobile Rack Specicaitons....................................E-1

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC747 4U chassis features a unique and highly-optimized design.

The chassis is equipped with a high-efciency power supply. High-performance fans

provide ample optimized cooling for the system and eight hot-swappable drive bays

offer maximum storage capacity in a 4U form factor.

1-2 Shipping List

Please visit the following link for the latest shipping lists and part numbers for your

particular chassis model http://www.supermicro.com/products/chassis/4U/?chs=747.

Chapter 1: Introduction

1-1

SC747 Chassis

Model CPU HDD I/O Slots Power

Supply

SC747TQ-R1400B DP/UP 8x SAS/SATA 11x FF 1400W Redundant

(Gold Level)

SC747TQ-R1620B DP/UP 8x SAS/SATA 11x FF 1620W Redundant

(Gold Level)

SC747BTQ-R1K62B DP/UP 8x SAS/SATA 11x FF 1620W Redundant

(Gold Level)

Legend

UP = Single Processor Support

DP = Dual Processor Support

FF = Full-height, Full-length

SC747 Chassis Manual

1-2

1-3 Chassis Features

The SC747 4U high-performance chassis includes the following features:

CPU

The SC747 chassis supports single or dual processors.

Hard Drives

The SC747 chassis features eight slots for SAS/SATA drives. These drives are hot

-swappable. Once set up correctly, these drives can be removed without powering

down the server.

I/O Expansion Slots

Each version of the SC747 chassis includes eleven (TQ model) or nine (TG model)

full-height PCI slots for expansion cards.

Peripheral Drives

Each SC747 chassis provides three 5.25” peripheral drive bays for DVD-ROM/DVD-

RW drives, or additional hard drives.These bays are in a rotating cage that allows

for the chassis to be congured in both tower and rack mounted environments.

Other Features

Other on-board features are included to promote system health. These include four

cooling fans, two exhaust fans, a convenient power switch, reset button, and ve

LED indicators.

Andere Handbücher für SC747TQ-R1400B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Chassis Handbücher

Supero

Supero SC747TQ-R1400B Bedienungsanleitung

Supero

Supero SC523L-410B Bedienungsanleitung

Supero

Supero Supero SC743 Bedienungsanleitung

Supero

Supero SC742i Bedienungsanleitung

Supero

Supero SC822R Bedienungsanleitung

Supero

Supero SC743i-645 Bedienungsanleitung

Supero

Supero SC846TQ-900B Bedienungsanleitung

Supero

Supero SC812L Series Bedienungsanleitung

Supero

Supero SC828 Series Bedienungsanleitung

Supero

Supero Supero SC836 Series Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC502 Series Bedienungsanleitung

Supero

Supero SC847J SAS2 Series Bedienungsanleitung

Supero

Supero SC113 Series Bedienungsanleitung

Supero

Supero SC101i Bedienungsanleitung

Supero

Supero SC748TQ-R1200B Bedienungsanleitung

Supero

Supero SC836TQ-R800V Bedienungsanleitung

Supero

Supero CSE-503-200B Bedienungsanleitung

Supero

Supero SC835TQ Bedienungsanleitung

Supero

Supero SC811TQ-600B Bedienungsanleitung

Supero

Supero SC836TQ - R800V(B) Bedienungsanleitung

Supero

Supero SC836A-R1200B SC836E1-R800BSC836E1-R800V Bedienungsanleitung

Supero

Supero SC847A-R1400LPB Bedienungsanleitung

Supero

Supero SC510T-200B Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung