Supero H8SCM Bedienungsanleitung
USER’S MANUAL
Revision 1.2c
®
SUPER
H8SCM
H8SCM-F
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.2c
Release Date: March 11, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
iii
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
H8SCM(-F) serverboard.
The H8SCM(-F) serverboard is based on the AMD® SR5650/SP5100 chipset and
supports one AMD Socket C32 type processor with up to 32 GB of ECC/Non-ECC
UDIMM or up to 128 GB of ECC RDIMM SDRAM memory.The H8SCM serverboard
does not have IPMI capability, whereas the H8SCM-F serverboard does.
Please refer to the motherboard specifications pages on our web site for updates on
supported processors (http://www.supermicro.com/aplus/). This product is intended
to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your motherboard
box, describes the features, specifications and performance of the motherboard
and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the motherboard in a chassis. Also refer to this chapter to connect the hard disk
drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup configuration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.
iv
Table of Contents
Chapter 1 Introduction
1-1 Overview .........................................................................................................1-1
Checklist..........................................................................................................1-1
1-2 Contacting Supermicro....................................................................................1-2
H8SCM(-F) Quick Reference..........................................................................1-5
1-3 Serverboard Features..................................................................................... 1-7
1-4 Chipset Overview..........................................................................................1-10
AMD SR5650/SP5100 Chipset.....................................................................1-10
HyperTransport Technology.......................................................................... 1-10
1-5 PC Health Monitoring.................................................................................... 1-10
1-6 Power Configuration Settings.........................................................................1-11
1-7 Power Supply................................................................................................ 1-12
1-8 Super I/O....................................................................................................... 1-13
Chapter 2 Installation
2-1 Standardized Warning Statements ................................................................. 2-1
About Standardized Warning Statements.......................................................2-1
2-2 Static-Sensitive Devices..................................................................................2-4
Precautions .....................................................................................................2-4
Unpacking .......................................................................................................2-4
2-3 Processor and Heatsink Installation................................................................2-5
2-4 Mounting the Serverboard into a Chassis ......................................................2-7
2-5 Installing Memory............................................................................................2-7
DIMM Module Population Configuration .................................................... 2-9
2-6 PCI Expansion Cards......................................................................................2-9
2-7 I/O Port and Control Panel Connections ......................................................2-10
Front Control Panel....................................................................................... 2-10
2-8 Connector Definitions ....................................................................................2-11
Power Connectors ....................................................................................2-11
Power Connector.......................................................................................2-11
Reset Connector .......................................................................................2-11
Power Fail LED........................................................................................2-12
Overheat/Fan Fail LED (OH)....................................................................2-12
NIC2 (Activity) LED.................................................................................. 2-12
NIC1 (Activity) LED.................................................................................. 2-12
HDD LED.................................................................................................. 2-12
Power On LED......................................................................................... 2-13
Table of Contents
v
NMI Button ............................................................................................... 2-13
LAN1/2 (Ethernet Ports)........................................................................... 2-13
Universal Serial Bus Ports....................................................................... 2-13
Chassis Intrusion ..................................................................................... 2-14
USB Headers ........................................................................................... 2-14
Serial Ports...............................................................................................2-14
Fan Headers............................................................................................. 2-14
SGPIO......................................................................................................2-15
Trusted Platform Module Header.............................................................2-15
Power SMB (I2C) Connector .................................................................... 2-15
ATX PS/2 Keyboard and PS/2 Mouse Ports............................................2-16
Power LED/Speaker................................................................................. 2-16
Compact Flash Card PWR Connector..................................................... 2-16
Overheat LED........................................................................................... 2-17
Wake-On-LAN .......................................................................................... 2-17
JIPMB (H8SCM-F only)............................................................................ 2-17
Video Connector....................................................................................... 2-17
2-9 Jumper Settings............................................................................................2-18
Explanation of Jumpers ................................................................................ 2-18
CMOS Clear............................................................................................. 2-18
LAN1/2 Enable/Disable ........................................................................... 2-19
VGA Enable/Disable................................................................................. 2-19
Compact Flash Master/Slave Select........................................................ 2-19
Watch Dog Enable/Disable ...................................................................... 2-19
Onboard Speaker Enable/Disable............................................................ 2-20
I2C to PCI-Express Slot........................................................................... 2-20
BMC Jumper ............................................................................................ 2-20
2-10 Onboard Indicators........................................................................................2-21
GLAN LEDs.............................................................................................. 2-21
IPMI Dedicated LAN LEDs....................................................................... 2-21
BMC Heartbeat LED ................................................................................ 2-21
Power LED...............................................................................................2-22
2-11 IDE and SATA Drive Connections................................................................. 2-22
SATA Ports ............................................................................................... 2-22
IDE Connector.......................................................................................... 2-23
2-12 Enabling SATA RAID.....................................................................................2-24
Serial ATA (SATA)..........................................................................................2-24
Installing the OS/SATA Driver....................................................................... 2-24
H8SCM(-F) SERVERBOARD USER'S MANUAL
Table of Contents
vi
Building a Driver Diskette.........................................................................2-24
Enabling SATA RAID in the BIOS.................................................................2-25
Using the DotHill and Adaptec RAID Utility.................................................. 2-27
Installing the RAID Driver During OS Installation......................................... 2-27
2-13 Installing Drivers............................................................................................ 2-28
Supero Doctor III........................................................................................... 2-29
2-14 Serverboard Battery...................................................................................... 2-31
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures...........................................................................3-1
Before Power On ............................................................................................3-1
No Power ........................................................................................................ 3-1
No Video .........................................................................................................3-2
Memory Errors ...............................................................................................3-2
Losing the System’s Setup Configuration.......................................................3-2
3-2 Technical Support Procedures........................................................................ 3-2
3-3 Frequently Asked Questions...........................................................................3-3
3-4 Returning Merchandise for Service.................................................................3-4
Chapter 4 BIOS
4-1 Introduction...................................................................................................... 4-1
4-2 Main Menu ...................................................................................................... 4-2
4-3 Advanced Settings Menu................................................................................ 4-2
4-3 Security Menu...............................................................................................4-16
4-4 Boot Menu..................................................................................................... 4-16
4-5 Exit Menu...................................................................................................... 4-17
Appendix A BIOS Error Beep Codes
Appendix B BIOS POST Checkpoint Codes
B-1 Uncompressed Initialization Codes.................................................................B-1
B-2 Bootblock Recovery Codes.............................................................................B-2
B-3 Uncompressed Initialization Codes.................................................................B-3
Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your motherboard.
If anything listed here is damaged or missing, contact your retailer.
• One (1) H8SCM(-F) serverboard
• One (1) I/O shield (MCP-260-00027-0N)
• One (1) Retention bracket (BKT-0012L)
• One (1) 9-pin serial port cable (CBL-0010L)
• One (1) ATA 66/100 IDE LP cable (CBL-0036L-03)
• Six (6) 2ft. Amphenol, SATA cable (CBL-0044L)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your motherboard.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety information:
http://super-dev/about/policies/safety_information.cfm
• If you have any questions, please contact our support team at:
support@supermicor.com
1-2
H8SCM(-F) SERVERBOARD USER'S MANUAL
1-2 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Web Site: www.supermicro.com
Asia-Pacific
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Tel: +886-(2)-8226-3990
Web Site: www.supermicro.com.tw
Chapter 1: Introduction
1-3
Figure 1-1. H8SCM(-F) Image
1-4
H8SCM(-F) SERVERBOARD USER'S MANUAL
Notes:
Jumpers not indicated are for test purposes only.
Not all ports, jumpers or LED Indicators are available on all serverboards.
Figure 1-2. H8SCM(-F) Serverboard Layout
(not drawn to scale)
JD1
FAN4 FAN3
FAN2
FAN5
SATA0 SATA1
SATA2 SATA3
SATA4 SATA5
JWF1
JPW1
JF1
JPW2
JPI2C1
JIPMB
JWOL1
JCF1
JL1
JOH1
JWD1
JPG1 JPL2 JPL1
JBT1
DP2
DP1
IPMI_LAN
CPU
FAN1
DIMM2B
DIMM2A
DIMM1B
DIMM1A
T-SGPIO1
T-SGPIO2
IDE#1
CPU
USB6
SLOT7 PCI-E 2.0 X8 / X16 (IN X16)
SLOT6 PCI-E 2.0 X8
USB4/5
USB2/3
SLOT4 PCI 33MHz
LAN2
LAN1
COM2
BATTERY
COM1
VGA
USB0/1
KB/Mouse
SLOT5 PCI-E 2.0 X4 (in X8)
BMC
AMD
SR5650
AMD
SP5100
JI2C1
JI2C2
JPB1
JLPC1
Andere Handbücher für H8SCM
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Supero Hauptplatine Handbücher
Supero
Supero X9SCD-F Bedienungsanleitung
Supero
Supero X9DR7-LN4F Bedienungsanleitung
Supero
Supero X8DTN+ Bedienungsanleitung
Supero
Supero C2SBC-Q Bedienungsanleitung
Supero
Supero C7Q67 Bedienungsanleitung
Supero
Supero X7DCL-3 Bedienungsanleitung
Supero
Supero C7Z97-OCE Bedienungsanleitung
Supero
Supero H8DMR-82 Bedienungsanleitung
Supero
Supero C2SEA Bedienungsanleitung
Supero
Supero P8SGA Bedienungsanleitung
Supero
Supero X10SBA-V Bedienungsanleitung
Supero
Supero SUPER P4STA Bedienungsanleitung
Supero
Supero C7Z170-M Bedienungsanleitung
Supero
Supero C7Z97-OCE Bedienungsanleitung
Supero
Supero SUPER P6DBS Bedienungsanleitung
Supero
Supero X9DBU-iF Bedienungsanleitung
Supero
Supero X9DRT-HF+ Bedienungsanleitung
Supero
Supero SUPER X7SPA-L Bedienungsanleitung
Supero
Supero SUPER 370SBA Bedienungsanleitung
Supero
Supero SUPER P6DGH Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
