Supero PDSLM Bedienungsanleitung

PDSLM

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: Information on FCC compliance of this motherboard can be found on Supermicro's

web site at www.supermicro.com.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: August 27, 2008

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of

the PDSLM motherboard. The PDSLM supports a single Intel Core2

Duo or a Core Solo Processor at system bus speeds of up to 667 MHz. The Intel

Core2 Duo and Core Solo Processors are housed in a Micro Flip-Chip Pin Grid

Array (Micro-FCPGA) package seated in an mPGA478M socket. With support of

the Dual-Core Technology, Intel Wide Dynamic Execution, Intel Advanced Smart

Cache, Intel Advanced Digital Media Boost, Intel Smart Memory Access, and the

Matrix Storage Technology, the PDSLM delivers unparalleled system performance

and great power efﬁciency in a slim size package. Please refer to the motherboard

speciﬁcations pages on our web site (http://www.supermicro.com/products) for

updates or visit Intel's web site for processor support. This product is intended to

be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁcations and performance of the PDSLM

motherboard and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the system setup.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS POST Messages.

Appendix B lists BIOS POST Codes.

Appendix C lists Software Installation Instructions.

Conventions Used in this Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Important information given to prevent faulty installation and to avoid

damage to the motherboard and the components

Note: Additional Information given to ensure proper component installation and

correct system setup

Preface

iii

PDSLM User’s Manual

Table of Contents

Preface

About This Manual ...................................................................................................... iii

Manual Organization .................................................................................................... iii

Conventions Used in this Manual ................................................................................ iii

Chapter 1: Introduction

1-1 Overview ......................................................................................................... 1-1

Checklist ..................................................................................................... 1-1

Contacting Supermicro ............................................................................... 1-2

PDSLM Image ........................................................................... 1-3

PDSLM Layout ........................................................................... 1-4

PDSLM Quick Reference ............................................................ 1-5

Motherboard Features .............................................................................. 1-6

System Block Diagram............................................................................... 1-8

1-2 Chipset Overview ........................................................................................... 1-9

1-3 PC Health Monitoring ................................................................................... 1-10

1-4 Power Conﬁguration Settings ....................................................................... 1-10

1-5 ACPI Features ............................................................................................... 1-10

Chapter 2: Installation

2-1 Static-Sensitive Devices ................................................................................. 2-1

2-2 Processor/Heatsink Installation and Removal ................................................ 2-2

2-3 Mounting the Motherboard in the Chassis ..................................................... 2-6

2-4 Installing DDR2 Memory ................................................................................ 2-7

2-5 Connectors and I/O Ports................................................................................ 2-9

A. Back Panel Connector and I/O Ports ......................................................... 2-9

ATX PS/2 Keyboard and PS/2 Mouse Ports............................................ 2-10

Video (VGA/CRT) Connector ....................................................................2-11

Serial Ports............................................................................................... 2-12

Universal Serial Bus (USB)..................................................................... 2-13

Gigabit LAN Port ...................................................................................... 2-14

AC'97 Audio.............................................................................................. 2-15

BP-Accessible Line-out Header ............................................................... 2-15

B-1 Front Control Panel.................................................................................. 2-16

B-2 Front Control Panel Pin Deﬁnitions ......................................................... 2-17

System Beep ............................................................................................ 2-17

Non-Override Power Switch..................................................................... 2-17

System Reset Switch .............................................................................. 2-18

Power Switch .......................................................................................... 2-18

Error LED ................................................................................................ 2-19

Message LED.......................................................................................... 2-19

HDD LED ................................................................................................ 2-20

Power LED ............................................................................................... 2-20

2-6 Connecting Cables ....................................................................................... 2-21

Main Power Connector ......................................................................... 2-21

External Power Connector ....................................................................... 2-21

Internal Buzzer (Speaker Connector) ...................................................... 2-22

Fan Headers............................................................................................. 2-23

2-7 Jumper Settings ............................................................................................ 2-24

Explanation of Jumpers ......................................................................... 2-24

Internal Buzzer Enable ........................................................................... 2-24

CMOS Clear ........................................................................................... 2-25

2-8 Onboard Indicators ....................................................................................... 2-26

GLAN LED Indicators............................................................................... 2-26

Onboard Power LED ................................................................................ 2-27

2-9 SATA and Hard Disk Drive Connections ...................................................... 2-28

SATA Connectors .................................................................................... 2-28

IDE Connector......................................................................................... 2-29

Chapter 3: Troubleshooting

3-1 Troubleshooting Procedures ........................................................................... 3-1

Before Power On....................................................................................... 3-1

No Power................................................................................................... 3-1

No Video .................................................................................................. 3-1

Memory Errors........................................................................................... 3-2

Losing the System’s Setup Conﬁguration ................................................ 3-2

3-2 Technical Support Procedures ....................................................................... 3-2

3-3 Frequently Asked Questions .......................................................................... 3-3

3-4 Returning Merchandise for Service ................................................................. 3-4

Chapter 4: BIOS

4-1 Introduction ....................................................................................................... 4-1

4-2 Main Setup ...................................................................................................... 4-2

4-3 Advanced Setup .............................................................................................. 4-3

4-4 Security Settings............................................................................................. 4-14

Table of Contents

PDSLM User’s Manual

4-5 Boot Settings .................................................................................................. 4-15

4-6 Exit Options .................................................................................................... 4-16

Appendices:

Appendix A: BIOS Error Beep Codes .......................................................................A-1

Appendix B: BIOS POST Codes................................................................................B-1

Appendix C: Installing Software Programs and Drivers.............................................C-1

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the shipping package.

One (1) Supermicro Mainboard

One (1) Supermicro CD containing drivers and utilities

One (1) User's/BIOS Manual (Optional)

1-2

PDSLM User’s Manual

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Paciﬁc

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-82261900

Chapter 1: Introduction

1-3

PDSLM Image

Note:

All images and layouts shown in this manual were based upon the latest PCB

Revision available at the time of publishing of this manual. The motherboard

you've received may or may not look exactly the same as the graphics shown in

this manual.

1-4

PDSLM User’s Manual

Important Notes to the User

• Connectors/Jumpers not indicated are for testing only.

• See Chapter 2 for detailed information on jumpers, I/O ports and JF1

frontpanel connections.

• " " or " " indicates the location of "Pin 1".

• When one DIMM module is used, install it in DIMM Slot 1 (SO-DIMMA or

JDIMM1). To un-install the DIMM module, be sure to remove the one installed

in DIMM Slot 2 (SO-DIMMB or JDIMM2) ﬁrst.

• To power on the system, please short Pin 14 (the green wire) and Pin 15 (the

black wire) of the 12V 20-Pin ATX power connector or Pin 16 (the green wire)

and Pin 17 (the black wire) of the 12V 24-Pin ATX power connector ﬁrst. For

system stability, please use 4-pin 12V PWR cables that can supply at least

13A current.

Motherboard Layout

(not drawn to scale)

JDIMM1

JSPKR1

JS2

JS1

JCMOS1

J17

FAN1

FAN2

DP1

JDIMM2

JIDE1

JF1

JCOM2

J12

J11

JPS1

4-Pin PWR

South Bridge

North Bridge

Audio

CTRL

mPGA478 SOCKET

PDSLM

SATA2

CPU

SO-DIMM-A (DIMM Slot 1)

IDE

COM-A&CRT

KB/MOUSE

CPU Fan

Chassis Fan

SATA0

COM-B

USB 2/3

SO-DIMM-B (DIMM Slot 2)

External PWR

Front Panel Control

Battery

BIOS

Buzzer

Super I/O

ICH7M

945GME

LAN

CTRL

Intel

LAN/USB 0&1

AUDIO JACK

Line-Out

JPCI1

PCI 33MHZ

Inhaltsverzeichnis

Andere Supero Hauptplatine Handbücher

Supero

Supero X9SPU-F Bedienungsanleitung

Supero

Supero Supero X8SIT-F Bedienungsanleitung

Supero

Supero B1SA4-2750F Bedienungsanleitung

Supero

Supero X6DH8-XB Bedienungsanleitung

Supero

Supero H8DGG-QF Bedienungsanleitung

Supero

Supero SUPER X7SPA-L Bedienungsanleitung

Supero

Supero X9SCM-IIF Bedienungsanleitung

Supero

Supero Supero X9DRFF Bedienungsanleitung

Supero

Supero SUPER P6SLE Bedienungsanleitung

Supero

Supero P8SC8 Bedienungsanleitung

Supero

Supero X10SAE Bedienungsanleitung

Supero

Supero H8DM8-2 Bedienungsanleitung

Supero

Supero SUPER P3TDDR Bedienungsanleitung

Supero

Supero H8DCT-F Bedienungsanleitung

Supero

Supero X6DA8-G Bedienungsanleitung

Supero

Supero X9DRT-HF+ Bedienungsanleitung

Supero

Supero SUPER P3TDL3 Bedienungsanleitung

Supero

Supero H8QM3-2 Bedienungsanleitung

Supero

Supero SUPER i2DML-8G2 Bedienungsanleitung

Supero

Supero X9DRG-HF+II Bedienungsanleitung

Supero

Supero SUPER S2DM3 Bedienungsanleitung

Supero

Supero SUPERO H8QGI+-F Bedienungsanleitung

Supero

Supero C2SBA+II Bedienungsanleitung

Supero

Supero H8QI6-F Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung