Supero AS-1041M-T2 Plus Bedienungsanleitung

AS1021M-T2+

USER’S MANUAL

1.0a

SUPER ®

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0a

Release Date: June 6, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the AS1021M-T2+. Installation

and maintenance should be performed by experienced technicians only.

The AS1021M-T2+ is a 1U server based on the SC815TQ-560C rackmount chassis

and the Super H8DME-2, a dual processor serverboard that supports AMD Socket

F type processors and up to 32 GB of registered ECC DDR2-667/533 or up to 64

GB of registered ECC DDR2-400 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the H8DME-2 serverboard and

the SC815TQ-560C chassis, which comprise the AS1021M-T2+.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the AS1021M-T2+ into a rack

and check out the server conﬁguration prior to powering up the system. If your

server was ordered without processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

AS1021M-T2+ User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

AS1021M-T2+.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the H8DME-2 serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-560C server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: BIOS POST Checkpoint Codes

Appendix C: System Speciﬁcations

Preface

Notes

Table of Contents

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

1-4 Contacting Super Micro .................................................................................. 1-5

Chapter 2: Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System ................................................................................... 2-1

2-3 Preparing for Setup ........................................................................................ 2-1

Choosing a Setup Location ...................................................................... 2-2

Rack Precautions ..................................................................................... 2-2

Server Precautions ................................................................................... 2-2

Rack Mounting Considerations ................................................................ 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

2-5 Checking the Serverboard Setup ................................................................... 2-8

2-6 Checking the Drive Bay Setup ..................................................................... 2-10

Chapter 3: System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons .................................................................................... 3-1

Reset ........................................................................................................ 3-1

Power ....................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail .................................................................................... 3-2

NIC2 ......................................................................................................... 3-2

NIC1 ......................................................................................................... 3-2

HDD .......................................................................................................... 3-2

Power ....................................................................................................... 3-3

3-4 Drive Carrier LEDs ......................................................................................... 3-3

AS1021M-T2+ User's Manual

Chapter 4: System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ........................................................................... 4-2

4-3 ESD Precautions ............................................................................................ 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5: Advanced Serverboard Setup

5-1 Handling the Serverboard .............................................................................. 5-1

5-2 Processor and Heatsink Installation ............................................................... 5-2

5-3 Connecting Cables ......................................................................................... 5-5

Connecting Data Cables .......................................................................... 5-5

Connecting Power Cables ....................................................................... 5-5

Connecting the Control Panel .................................................................. 5-6

5-4 I/O Ports ......................................................................................................... 5-7

5-5 Installing Memory ........................................................................................... 5-7

5-6 Adding PCI Cards ......................................................................................... 5-10

5-7 Serverboard Details ...................................................................................... 5-11

H8DME-2 Layout .................................................................................... 5-11

H8DME-2 Quick Reference ................................................................... 5-12

5-8 Connector Deﬁnitions ................................................................................... 5-13

ATX Power Connector ........................................................................... 5-13

Processor Power Connector .................................................................. 5-13

Auxiliary Power Connector ..................................................................... 5-13

Power LED ............................................................................................. 5-13

NMI Button ............................................................................................. 5-13

Power LED ............................................................................................. 5-13

HDD LED ............................................................................................... 5-14

NIC1/NIC2 LEDs .................................................................................... 5-14

Overheat/Fan Fail LED .......................................................................... 5-14

Power Fail LED ...................................................................................... 5-14

Reset Button .......................................................................................... 5-15

Power Button .......................................................................................... 5-15

Universal Serial Bus Ports ..................................................................... 5-15

Universal Serial Bus Headers ................................................................ 5-15

ATX PS/2 Keyboard and PS/2 Mouse Ports ......................................... 5-16

Serial Ports ............................................................................................. 5-16

Fan Headers .......................................................................................... 5-16

JLAN 1/2 (Ethernet Ports) ...................................................................... 5-16

Power LED/Speaker ............................................................................... 5-17

vii

Table of Contents

viii

Overheat LED ........................................................................................ 5-17

Chassis Intrusion .................................................................................... 5-17

Wake-On-LAN ........................................................................................ 5-17

Wake-On-Ring ........................................................................................ 5-18

Power Supply I2C Header ...................................................................... 5-18

SMBus Header ....................................................................................... 5-18

3rd Power Supply Alarm Header ........................................................... 5-18

Power Fail Alarm Reset Header ............................................................ 5-19

Compact Flash Power Header ............................................................... 5-19

SGPIO .................................................................................................... 5-19

5-9 Jumper Settings ............................................................................................ 5-20

Explanation of Jumpers ......................................................................... 5-20

CMOS Clear ........................................................................................... 5-20

3rd Power Supply Fail Detect Enable/Disable ....................................... 5-20

I2C to PCI Enable/Disable ...................................................................... 5-21

Watch Dog ............................................................................................. 5-21

Onboard Speaker Enable/Disable ......................................................... 5-22

PCI-X Slot Speed ................................................................................... 5-22

VGA Enable/Disable ............................................................................... 5-22

Compact Flash Master/Slave ................................................................. 5-22

5-10 Onboard Indicators ....................................................................................... 5-23

JLAN LEDs ............................................................................................. 5-23

+3.3V Standby LED ............................................................................... 5-23

5-11 Floppy, IDE and SATA Drive Connections ................................................... 5-24

Floppy Connector ................................................................................... 5-24

IDE Connectors ...................................................................................... 5-25

SATA Ports ............................................................................................. 5-25

5-12 Enabling SATA RAID .................................................................................... 5-26

5-13 Installing Additional Drivers .......................................................................... 5-28

Chapter 6: Advanced Chassis Setup

6-1 Static-Sensitive Devices ................................................................................. 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans and Air Shroud ......................................................................... 6-3

System Fan Failure .................................................................................. 6-3

Replacing System Cooling Fans .............................................................. 6-3

Installing the Air Shroud ........................................................................... 6-4

6-4 Drive Bay Installation/Removal ...................................................................... 6-6

Removing the Front Bezel ....................................................................... 6-6

AS1021M-T2+ User's Manual

Table of Contents

Accessing the Drive Bays ........................................................................ 6-6

SATA Drive Installation ............................................................................. 6-7

DVD-ROM and Floppy Drive Installation ................................................. 6-9

6-5 Power Supply ............................................................................................... 6-10

Power Supply Failure ............................................................................. 6-10

Removing/Replacing the Power Supply ................................................. 6-10

Chapter 7: BIOS

7-1 Introduction ..................................................................................................... 7-1

7-2 Main Menu ...................................................................................................... 7-2

7-3 Advanced Settings Menu ............................................................................... 7-2

7-4 Boot Menu .................................................................................................... 7-16

7-5 Security Menu ............................................................................................... 7-17

7-6 Exit Menu ...................................................................................................... 7-18

Appendices:

Appendix A: BIOS Error Beep Codes

Appendix B: BIOS POST Checkpoint Codes

Appendix C: System Speciﬁcations

Notes

AS1021M-T2+ User's Manual

Andere Handbücher für AS-1041M-T2 Plus

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero AS-4041M-82R Bedienungsanleitung

Supero

Supero A+ 2022TC-HTRF4 Bedienungsanleitung

Supero

Supero SUPERSERVER 5018D-MF Bedienungsanleitung

Supero

Supero AS2021M-T2R+ Bedienungsanleitung

Supero

Supero SUPERSERVER 6015B-3 Bedienungsanleitung

Supero

Supero SuperWorkstation 7036A-T Bedienungsanleitung

Supero

Supero SuperServer 6040 Bedienungsanleitung

Supero

Supero SUPERSERVER 7046GT-TRF Bedienungsanleitung

Supero

Supero SuperServer 5016T-MRB Bedienungsanleitung

Supero

Supero 1027R-72BRFTP Bedienungsanleitung

Supero

Supero SUPERSERVER 1027GR-TRFT Bedienungsanleitung

Supero

Supero SC819TQ-R700UB Bedienungsanleitung

Supero

Supero SUPERSERVER 6016XT-TF Bedienungsanleitung

Supero

Supero SuperServer 2027TR-H71QRF Bedienungsanleitung

Supero

Supero SUPERSERVER 5015B-T Bedienungsanleitung

Supero

Supero A+ SERVER 2022G-URF Bedienungsanleitung

Supero

Supero 6026T-NTR+ Bedienungsanleitung

Supero

Supero AS-1011M-UR Bedienungsanleitung

Supero

Supero SuperServer 6024H-8R Bedienungsanleitung

Supero

Supero SC733i-665B Bedienungsanleitung

Supero

Supero SuperServer 5016I-MR Bedienungsanleitung

Supero

Supero SuperServer 5013C-MT Bedienungsanleitung

Supero

Supero SUPERSERVER 1027GR-TRF Bedienungsanleitung

Supero

Supero SUPERSERVER 6047R-TXRF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung