Supero SC819TQ-R700UB Bedienungsanleitung

SC819 Chassis Series

SC819TQ-R700UB SC819TQ-R700WB

USER’S MANUAL

1.0b

SUPER ®

SC819 Chassis Manual

Manual Revision 1.0b

Release Date: July 17, 2013

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC819 1U chassis. Installa-

tion and maintenance should be performed by experienced technicians only.

Supermicro's SC819 1U chassis features a unique and highly-optimized design for

1U UIO servers. The chassis is equipped with a 700W high-efciency 80 Plus Gold

Level certied power supply to support high-performance system components and

high-speed heavy-duty counter rotating fans for ample cooling. The chassis provides

maximum features in a 1U form factor for high-end, high-performance applications.

SC819 Chassis Manual

Manual Organization

Chapter 1 Introduction

The rst chapter provides a list of the main components included with this chassis

and describes the main features of the SC819 chassis. This chapter also includes

contact information.

Chapter 2 Standardized Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. You should thoroughly

familiarize yourself with this chapter for a general overview of safety precautions

that should be followed before installing and servicing this chassis.

Chapter 3 Chassis Components

Refer here for details on this chassis model including the fans, drive bays, airow

shrouds, and other components.

Chapter 4 System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 5 Chassis Setup and Installation

This chapter provides detailed information on this chassis. You should follow the

procedures given in this chapter when installing, removing, or reconguring your

chassis.

Chapter 6 Rack Installation

Refer to this chapter for detailed information on chassis rack installation. You should

follow the procedures given in this chapter when installing, removing or reconguring

your chassis into a rack environment.

Appendices

This section lists compatible cables, power supply specications, and compatible

backplanes. Not all compatible backplanes are listed. Refer to our web site for the

latest compatible backplane information.

Appendix A Chassis Cables

Appendix B Power Supply Specications

Appendix C SAS-815TQ Backplane Specications

Preface

Table of Contents

Preface

About This Manual ........................................................................................................iii

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping List.................................................................................................... 1-1

1-3 Chassis Features ............................................................................................ 1-2

CPU................................................................................................................. 1-2

Hard Drives ..................................................................................................... 1-2

I/O Expansion slots......................................................................................... 1-2

Peripheral Drives............................................................................................. 1-2

Other Features................................................................................................ 1-2

1-4 Contacting Supermicro.................................................................................... 1-3

1-5 Returning Merchandise for Service................................................................. 1-4

Chapter 2 tandardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning ........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Overview ......................................................................................................... 3-1

3-2 Components.................................................................................................... 3-1

Backplane........................................................................................................ 3-1

Fans ................................................................................................................ 3-1

Mounting Rails ................................................................................................ 3-1

SC819 Chassis Manual

Power Supply.................................................................................................. 3-2

Air Shroud (Optional) ...................................................................................... 3-2

3-3 Where to get Replacement Components........................................................ 3-2

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-3

4-4 Drive Carrier LEDs.......................................................................................... 4-5

SAS/SATA Drives ............................................................................................ 4-5

4-5 Power Supply LEDs and Overheat Indicators ................................................ 4-5

4-6 Overheating..................................................................................................... 4-6

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing the Chassis Cover ......................................................................... 5-2

5-3 Installing Hard Drives...................................................................................... 5-3

5-4 DVD and USB COM Tray Installation............................................................. 5-6

5-5 Installing the Motherboard .............................................................................. 5-7

Permanent and Optional Standoffs................................................................. 5-7

Expansion Card Setup .................................................................................... 5-9

5-6 Installing the Air Shroud (Optional)................................................................5-11

5-7 System Fans ................................................................................................. 5-12

5-8 Power Supply ............................................................................................... 5-14

Power Supply Failure.................................................................................... 5-14

5-9 Routing the I2C Cables ................................................................................. 5-15

Chapter 6 Rack Installation

6-1 Overview ......................................................................................................... 6-1

6-2 Unpacking the System .................................................................................... 6-1

6-3 Preparing for Setup......................................................................................... 6-1

Choosing a Setup Location............................................................................. 6-1

Rack Precautions............................................................................................ 6-2

General Server Precautions............................................................................ 6-2

Rack Mounting Considerations ....................................................................... 6-3

Ambient Operating Temperature ................................................................ 6-3

Reduced Airow ......................................................................................... 6-3

Mechanical Loading ................................................................................... 6-3

Circuit Overloading..................................................................................... 6-3

Reliable Ground ......................................................................................... 6-3

6-4 Rack Mounting Instructions............................................................................. 6-4

Identifying the Sections of the Rail Assemblies.............................................. 6-4

vii

Preface

Optional Inner Rail Extensions ....................................................................... 6-5

Appendix A Chassis Cables

Appendix B SC819 Power Supply Specications

Appendix C SAS-815TQ Backplane Specications

SC819 Chassis Manual

viii

Notes

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC819 1U chassis features a unique and highly-optimized design.

The chassis is equipped with a high-efciency power supply. High-performance

fans provide ample optimized cooling for the chassis and four hot-swappable drive

bays offer maximum storage capacity in a 1U form factor.

1-2 Shipping List

Please visit the Supermicro web site at www.supermicro.com for the latest shipping

lists and part numbers for your particular chassis model.

Chapter 1: Introduction

1-1

SC819 Chassis

Model HDD I/O Slots Power

Supply

SC819TQ-R700UB 4x SAS / SATA 2x FH + 1x LP 700W

(Gold Level)

SC819TQ-R700WB 4x SAS / SATA 2x FH + 1x LP 700W

(Gold Level)

Legend

FH = Full-height, full-length

LP = Low-prole

FF = Full-height, full-length

SC819 Chassis Manual

1-2

1-3 Chassis Features

The SC819 1U high-performance chassis includes the following features:

Motherboards

The SC819 chassis supports a single or dual processor motherboard. Please refer

to the motherboard specications pages on our website for updates on supported

motherboards.

Hard Drives

The SC819 chassis features four bays for SAS/SATA drives. These drives are

hot-swappable. Once set up correctly, these drives can be removed without power-

ing down the server. Additionally, these drives support SES2.

PCI Expansion Slots

Each version of the SC819 chassis includes two full-height, full-length PCI expan-

sion slots and one low-prole PCI expansion slot. "U" and "W" versions are opti-

mized for UIO and WIO motherboards.

Peripheral Drives

Each SC819 chassis supports one slim DVD-ROM drive (optional) and one slim

USB COM tray (optional).

Other Features

Other onboard features are included to promote system health. These include vari-

ous six cooling fans, a convenient power switch, reset button, and LED indicators.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero SuperServer 5012B-6 Bedienungsanleitung

Supero

Supero SuperServer6036T-TF Bedienungsanleitung

Supero

Supero SUPERSERVER 6023P-8 Bedienungsanleitung

Supero

Supero BPN-SAS-816T-A6 Bedienungsanleitung

Supero

Supero 1027R-72BRFTP Bedienungsanleitung

Supero

Supero SUPERSERVER 1027GR-TRF Bedienungsanleitung

Supero

Supero SC823TQ-653LPB Bedienungsanleitung

Supero

Supero SUPERSERVER 2027TR-HTRF+ Bedienungsanleitung

Supero

Supero SuperWorkstation 5037A-IL Bedienungsanleitung

Supero

Supero SuperServer 5013G-M Bedienungsanleitung

Supero

Supero SUPERSERVER 6014L-M Bedienungsanleitung

Supero

Supero A+ 1012A-MRF Bedienungsanleitung

Supero

Supero A+ SERVER 1022G-NTF Bedienungsanleitung

Supero

Supero A+ SERVER Bedienungsanleitung

Supero

Supero SuperServer 6033P-8R Bedienungsanleitung

Supero

Supero SUPERSERVER 5017C-MTF Bedienungsanleitung

Supero

Supero SC835TQ - R800B Bedienungsanleitung

Supero

Supero SuperServer 1027GR-72RT2+ Bedienungsanleitung

Supero

Supero AS-4021M-82R Plus Bedienungsanleitung

Supero

Supero SUPERSERVER 7047R-TRF Bedienungsanleitung

Supero

Supero SUPERSERVER 6026T-3RF Bedienungsanleitung

Supero

Supero FatTwin F617R2-F73 Bedienungsanleitung

Supero

Supero SuperServer 6040 Bedienungsanleitung

Supero

Supero SuperServer 6023M-8R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung