Supero SuperServer 5015M-Ni Bedienungsanleitung

SUPERSERVER 5015M-Ni

USER’S MANUAL

1.0

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0

Release Date: March 17, 2007

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5015M-Ni. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 5015M-Ni is an economical, dual processor server based on the

SC812L-280U 1U rackmount server chassis and the PDSMU serverboard, which

supports Intel®Xeon® 3000 Series, Pentium® D, Pentium Extreme Edition, Pentium

4, and Celeron D processors in an LGA775 Package at a Front Side (System) Bus

speed of 1066/667/533 MHz and up to 8 GB of unbuffered ECC/non-ECC DDR2-

667/533/400 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the SUPER PDSMU serverboard

and the SC812L-280U chassis, which make up the SuperServer 5015M-Ni.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5015M-Ni into

a rack and check out the server conﬁguration prior to powering up the system. If

your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

SUPERSERVER 5015M-Ni Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5015M-Ni.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the PDSMU serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the 1U SC812L-280U rackmount

server chassis. You should follow the procedures given in this chapter when in-

stalling, removing or reconﬁguring peripheral drives and when replacing the system

power supply unit and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 5015M-Ni Manual

Table of Contents

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-4

1-4 Contacting Supermicro ................................................................................... 1-6

Chapter 2: Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System ................................................................................... 2-1

2-3 Preparing for Setup ........................................................................................ 2-1

Choosing a Setup Location ...................................................................... 2-2

Rack Precautions ..................................................................................... 2-2

Server Precautions ................................................................................... 2-2

Rack Mounting Considerations ................................................................ 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails ............................................... 2-4

Installing the Chassis Rails ...................................................................... 2-5

Installing the Rack Rails .......................................................................... 2-5

Installing the Server into the Rack ........................................................... 2-6

Installing the Server into a Telco Rack .................................................... 2-7

2-5 Checking the Serverboard Setup ................................................................... 2-8

2-6 Checking the Drive Bay Setup ....................................................................... 2-9

Chapter 3: System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons .................................................................................... 3-1

Reset ........................................................................................................ 3-1

Power ....................................................................................................... 3-1

UID ........................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Universal Information LED ....................................................................... 3-2

NIC2 ......................................................................................................... 3-3

NIC1 ......................................................................................................... 3-3

HDD .......................................................................................................... 3-3

Power ....................................................................................................... 3-3

Chapter 4: System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ........................................................................... 4-2

4-3 ESD Precautions ............................................................................................ 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5: Advanced Serverboard Setup

5-1 Handling the Serverboard .............................................................................. 5-1

5-2 Processor and Heatsink Installation ............................................................... 5-2

5-3 Connecting Cables ......................................................................................... 5-5

Connecting Data Cables .......................................................................... 5-5

Connecting Power Cables ....................................................................... 5-5

Connecting the Control Panel .................................................................. 5-6

5-4 I/O Ports ......................................................................................................... 5-7

5-5 Installing Memory ........................................................................................... 5-7

5-6 Adding PCI Cards ........................................................................................... 5-9

5-7 Serverboard Details ...................................................................................... 5-10

PDSMU Layout ...................................................................................... 5-10

PDSMU Quick Reference ...................................................................... 5-11

5-8 Connector Deﬁnitions ................................................................................... 5-12

ATX Power Connection .......................................................................... 5-12

Processor Power Connection ................................................................ 5-12

NMI Button ............................................................................................. 5-12

Power LED ............................................................................................. 5-12

HDD LED ............................................................................................... 5-13

NIC1 LED ............................................................................................... 5-13

NIC2 LED ............................................................................................... 5-13

Universal Information LED ..................................................................... 5-13

Power Fail LED ...................................................................................... 5-14

Reset Button .......................................................................................... 5-14

Power Button .......................................................................................... 5-14

Universal Serial Bus ............................................................................... 5-14

Universal Serial Bus Headers ................................................................ 5-15

Serial Ports ............................................................................................. 5-15

Fan Headers .......................................................................................... 5-15

Chassis Intrusion .................................................................................... 5-16

Speaker Connector ................................................................................ 5-16

vii

Table of Contents

SUPERSERVER 5015M-Ni Manual

viii

ATX PS/2 Keyboard & Mouse Ports ...................................................... 5-16

Wake-On-LAN ........................................................................................ 5-16

Wake-On-Ring ........................................................................................ 5-17

Power SMB (I2C) Connector .................................................................. 5-17

Power Supply Fail .................................................................................. 5-17

Alarm Reset ........................................................................................... 5-17

LAN 1/2 (Ethernet Ports) ....................................................................... 5-18

Power LED ............................................................................................. 5-18

5-9 Jumper Settings ............................................................................................ 5-19

Explanation of Jumpers ......................................................................... 5-19

CMOS Clear ........................................................................................... 5-19

VGA Enable/Disable ............................................................................... 5-19

LAN1/2 Enable/Disable .......................................................................... 5-20

Watch Dog Enable/Disable .................................................................... 5-20

Power Force On Enable/Disable ........................................................... 5-20

5-10 Onboard Indicators ....................................................................................... 5-21

LAN1/LAN2 LEDs .................................................................................. 5-21

LE1 ......................................................................................................... 5-21

PWR-LED ............................................................................................... 5-21

5-11 Floppy, IDE and SATA Drive Connections ................................................... 5-22

Floppy Connector ................................................................................... 5-22

IDE Connector ........................................................................................ 5-23

SATA Ports ............................................................................................. 5-23

Chapter 6: Advanced Chassis Setup

6-1 Static-Sensitive Devices ................................................................................. 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure .................................................................................. 6-3

Replacing System Cooling Fans .............................................................. 6-3

6-4 Drive Bay Installation/Removal ...................................................................... 6-4

Accessing the Drive Bays ........................................................................ 6-4

Installing Components in the 3.5" Drive Bays ......................................... 6-5

6-5 Power Supply ................................................................................................. 6-6

Power Supply Failure ............................................................................... 6-6

Removing/Replacing the Power Supply ................................................... 6-6

Chapter 7: BIOS

7-1 Introduction ..................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

Table of Contents

7-3 Main BIOS Setup ............................................................................................ 7-2

7-4 Advanced Setup ............................................................................................. 7-6

7-5 Security ......................................................................................................... 7-16

7-6 Boot .............................................................................................................. 7-17

7-7 Exit ................................................................................................................ 7-18

Appendices:

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Intel HostRAID

Appendix D: System Speciﬁcations

SUPERSERVER 5015M-Ni User's Manual

Notes

Inhaltsverzeichnis

Andere Supero Server Handbücher

Supero

Supero SuperServer 6027R-3RF4+ Bedienungsanleitung

Supero

Supero SuperServer6036T-TF Bedienungsanleitung

Supero

Supero SUPERSERVER 6016TT-TF Bedienungsanleitung

Supero

Supero SuperServer 5017R-MF Bedienungsanleitung

Supero

Supero SuperServer 4027GR-TR Bedienungsanleitung

Supero

Supero SUPERSERVER 7045W-NTR+ Bedienungsanleitung

Supero

Supero AS2021M-UR Plus Bedienungsanleitung

Supero

Supero FatTwin F627R3-R72B+ Bedienungsanleitung

Supero

Supero AS-1041M-T2 Plus Bedienungsanleitung

Supero

Supero SuperServer 2027TR-H71QRF Bedienungsanleitung

Supero

Supero SUPERSERVER 1027GR-TQF Bedienungsanleitung

Supero

Supero SC216A-R1200UB Bedienungsanleitung

Supero

Supero Supero SC808T-1200W Bedienungsanleitung

Supero

Supero SUPERSERVER AS-4021GA-62R+F Bedienungsanleitung

Supero

Supero SC835TQ - R800B Bedienungsanleitung

Supero

Supero SUPERSERVER 6016T-URF4+ Bedienungsanleitung

Supero

Supero SUPERSERVER 2027TR-D70RF Bedienungsanleitung

Supero

Supero SuperServer 5014C-MR Bedienungsanleitung

Supero

Supero SuperServer 6026T-URF Bedienungsanleitung

Supero

Supero SUPERSERVER 2027GR-TRFHT Bedienungsanleitung

Supero

Supero AS-4041M-82R Bedienungsanleitung

Supero

Supero AS-2021M-32R Bedienungsanleitung

Supero

Supero SUPERSERVER 6015B-Ni Bedienungsanleitung

Supero

Supero SUPERO SUPERSERVER SYS-6026T-6RFTplus Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung